Exercise 3.6: FDMA, TDMA and CDMA

From LNTwww
Revision as of 13:38, 23 March 2021 by Javier (talk | contribs) (Text replacement - "Category:Exercises for Mobile Communications" to "Category:Mobile Communications: Exercises")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Charts for FDMA,
TDMA und CDMA

The diagrams illustrate the principle of

  • Frequency Division Multiple Access  $\rm (FDMA)$,
  • Time Division Multiple Access  $\rm (TDMA)$,  and
  • Code Division Multiple Access  $\rm (CDMA)$.


The multiple access methods listed here are based on the assumption that there are several transmitter–receiver pairs that share a transmission medium independently.

On the other hand, multiplexing occurs when a multiplexer  $\rm (MUX)$  bundles several signals at the beginning of transmission and a demultiplexer  $\rm (DEMUX)$  splits the common signal at the end.  In this case, FDM, TDM and CDM are abbreviated to  "Frequency (Time, Code) Division Multiplexing".

The task is to determine which of these methods (FDMA/FDM, TDMA/TDM, CDMA/CDM) is used by some of today's most important communications systems (GSM, UMTS, DSL).


Notes:

  • Notes on the communication systems considered here can be found under the following links:
  1.  GSM  (Global System for Mobile Communications),
  2.  UMTS  (Universal Mobile Communications Systems),
  3.  DSL  (Digital Subscriber Line).



Questionnaire

1

What do FDMA, TDMA and CDMA mean?

Modulation methods,
Multiple access methods,
Equalization procedures.

2

Which of these procedures are only applicable to digital systems?

FDMA/FDM,
TDMA/TDM,
CDMA/CDM.

3

What technology(ies) does the European 2G mobile radio standard GSM use?

FDMA/FDM,
TDMA/TDM,
CDMA/CDM.

4

Which technology(ies) uses UMTS (3G) within a 5 MHz band?

FDMA/FDM,
TDMA/TDM,
CDMA/CDM.

5

What technology(ies) uses the "Fast Internet" (DSL)?

FDMA/FDM,
TDMA/TDM,
CDMA/CDM.


Solution

(1)  Correct is the solution 2:

  • FDMA, TDMA and CDMA are multiple access or multiplexing techniques,
  • which are then, however, abbreviated as FDM, TDM and CDM:   "Frequency (Time, Code) Division Multiplexing"'.


(2)  Correct are the solutions 2 and 3:

  • FDMA/FDM can also be used in analog systems, of which classical broadcasting (since the 1930s) is an example.


(3)  Correct are the solutions 1 and 2:

  • At mobile radio standard  GSM,  FDMA and TDMA are used.
  • In the so-called "D-band"  (uplink from  $890$  to  $915 \ \rm MHz$, downlink from  $935$  to  $960 \ \rm MHz$), there are  $124$  FDMA channels of  $200 \ \rm kHz$,  taking into account the guard bands of  $100 \ \rm kHz$  at the upper and lower end of the range in each direction.
  • In the "E-band"  (uplink: $1710 - 1785 \ \rm MHz$,  downlink: $1805 - 1880 \ \rm MHz$),  $374$  FDMA channels can be used.
  • Time Division Multiple Access (TDMA) can be used to provide eight users additionally in each frequency band.  A TDMA frame has a length of  $4.615 \ \rm ms$, so that time slots of  $0.577 \ \ \rm ms$  duration are available for each user in this time interval.



(4)  Correct are the solutions 2 and 3:

  • The UMTS variant "UMTS Terrestrial Radio Access - Frequency Division Duplex"  $\text{(UTRA-FDD)}$  used exclusively in Germany consists of  $12$  paired uplink and downlink frequency bands of  $5 \ \rm MHz$  bandwidth each,
    • between $1920 \ \rm MHz$ and $1980 \ \rm MHz$ (uplink) or
    • between $2110 \ \rm MHz$ and $2170 \ \rm MHz$ (downlink).
  • So you could definitely speak of an  $\rm FDMA$  system.  However, the various  $5 \ \rm MHz$  bands are used by other network operators.
  • If, on the other hand, one considers a  $5 \ \rm MHz$  band on its own, UMTS does not have an FDMA component.  In each of the bands,  $\rm CDMA$  is implemented instead, so that up to  $512$  users can be active simultaneously in each frequency band.  And to some extent  $\rm TDMA$  (time slots, frames, TTI) is also used.


(5)  Only solution 1 is correct:

  • For "Fast Internet" connections nowadays, it is common to use  $\rm DSL$  ("Digital Subscriber Line").
  • This is based on  $\rm OFDM$  ("Orthogonal Frequency Division Multiplexing"), which is an FDM version.
  • The individual spectra are not separated, however, but overlap.  There is still no mutual influence due to the orthogonality.