Exercise 4.12Z: White Gaussian Noise

From LNTwww

PSD of white noise

A noise signal $n(t)$  is called  "white"  if it contains all spectral components without preference of any frequencies.

  • The physical power-spectral density defined only for positive frequencies   ⇒   ${\it \Phi}_{n+}(f)$  is constant  $($equal  $N_0)$  and extends frequency-wise to infinity.
  • ${\it \Phi}_{n+}(f)$  is shown in green in the upper graph.  The plus sign in the index is to indicate that the function is valid only for positive values of $f$.
  • For mathematical description one usually uses the two-sided power-spectral density  ${\it \Phi}_{n}(f)$.  Here applies for all frequencies from  $-\infty$  to  $+\infty$  (blue curve in the upper graph):
$${\it \Phi}_n (f) ={N_0}/{2}.$$


The bottom graph shows the two power-spectral densities  ${\it \Phi}_{b}(f)$  and  ${\it \Phi}_{b+}(f)$  of bandlimited white noise signal  $b(t)$.  It holds with the one-sided bandwidth $B$:

$${\it \Phi}_b(f)=\left\{ {N_0/2\atop 0}{\hspace{0.5cm} {\rm for}\quad |f|\le B \atop {\rm else}}\right.,$$
$${\it \Phi}_{b+}(f)=\left\{ {N_0\atop 0}{\hspace{0.5cm} {\rm for}\quad 0 \le f\le B \atop {\rm else}}\right.$$

For computer simulation of noise processes,  band-limited noise must always be assumed,  since only discrete-time processes can be handled.  For this,  the  Sampling Theorem  must be obeyed.  This states that the bandwidth  $B$  must be set according to the interpolation distance  $T_{\rm A}$  of the simulation.

Assume the following numerical values throughout this exercise:

  • The noise power density –  with respect to the resistor  $1 \hspace{0.05cm}\rm \Omega$  –  is  $N_0 = 4 \cdot 10^{-14}\hspace{0.05cm}\rm V^2/Hz$.
  • The  (one-sided)  bandwidth of the band-limited white noise is  $B = 100 \hspace{0.08cm}\rm MHz$.





Hints:



Questions

1

Which statements are always true for a white noise signal  $n(t)$.  Give reasons for your answers.

The ACF  $\varphi_n(t)$  has a sinc-shaped progression.
The ACF  $\varphi_n(\tau)$  is a Dirac delta function at  $\tau = 0$  with weight  $N_0/2$.
In practice,  there is no  (exact)  white noise.
Thermal noise can always be approximated as white.
White noise is always Gaussian distributed.

2

Calculate the ACF  $\varphi_b(\tau)$  of the random signal  $b(t)$  bandlimited to  $B = 100 \hspace{0.08cm}\rm MHz$.  What value results for  $\tau = 0$?

$\varphi_b(\tau = 0) \ = \ $

$\ \cdot 10^{-6} \ \rm V^2$

3

What is the rms value of this bandlimited random signal  $b(t)$?

$\sigma_b \ = \ $

$\ \rm mV$

4

What sampling distance  $T_{\rm A}$  should be  (at most)  chosen if the band-limited signal  $b(t)$  is used for discrete-time simulation of white noise?

$T_{\rm A} \ = \ $

$\ \rm ns$

5

Assume sampling distance  $T_{\rm A} = 1 \hspace{0.05cm}\rm ns$.  Then,  which of the statements are true for two consecutive samples of the signal  $b(t)$ ?

The samples are uncorrelated.
The samples are positively correlated.
The samples are negatively correlated.


Solution

(1)  Correct are the  solutions 2, 3, and 4:

  • The auto-correlation function  $\rm (ACF)$  is the Fourier transform of the power-spectral density  $\rm (PSD)$.  Here:
$${\it \Phi}_n (f) = {N_0}/{2} \hspace{0.3cm} \bullet\!\!-\!\!\!-\!\!\!-\!\!\circ\, \hspace{0.3cm} \varphi_n (\tau)={N_0}/{2} \cdot {\rm \delta} ( \tau).$$
  • However,  there is no  "real"  white noise in physics,  since such a noise would have to have an infinitely large signal power  $($the integral over the PSD as well as the ACF value at  $\tau = 0$  are both infinitely large$)$.
  • Thermal noise has a constant PSD up to frequencies of about  $\text{6000 GHz}$.  Since all  (current)  transmission systems operate in a much lower frequency range,  thermal noise can be said to be  "white"  to a good approximation.
  • The statistical property  "white"  says nothing about the amplitude distribution,  which is determined by the probability density function  $\rm (PDF)$  alone.
  • When considering the phase of a bandpass signal as the stochastic variable,  it is often modeled as uniformly distributed between  $0$  and  $2\pi$.
  • If there are no statistical bindings between the respective phase angles at different times,  this random process is also  "white".


ACF of band-limited noise

(2)  The power-spectral density is a rectangle of width  $2B$  and height  $N_0/2$.

  • The inverse Fourier transform yields an sinc–function:
$$\varphi_b(\tau) = N_0 \cdot B \cdot {\rm si} (2 \pi B \tau)\hspace{0.3cm} \Rightarrow \hspace{0.3cm}\varphi_b(\tau = 0) = N_0 \cdot B \hspace{0.15cm}\underline {=4}\cdot 10^{-6} \ \rm V^2.$$


(3)  The ACF value at the point  $\tau = 0$  gives the power. 

  • The root of this is called the  "rms value":
$$\sigma_b = \sqrt{\varphi_b(\tau = 0)} \hspace{0.15cm}\underline {=2 \hspace{0.05cm}\rm V}.$$


(4)  The ACF computed in  (3)  has zeros at equidistant distance from  $T_{\rm A}= 1/(2B)\hspace{0.15cm}\underline {=5\hspace{0.05cm} \rm ns}$: 

  • There are no statistical bindings between the two signal values  $b(t)$  and  $b(t + \nu \cdot T_{\rm A})$,
  • where  $\nu$  can take all integer values.


(5)  The correct solution is the  suggested solution 2.

  • The ACF value at  $\tau = T_{\rm A} = 1 \hspace{0.05cm}\rm ns$  is
$$\varphi_b(\tau = T_{\rm A}) = {\rm 4 \cdot 10^{-6} \hspace{0.1cm}V^2 \cdot sinc (1/5) \approx 3.742 \cdot 10^{-6} \hspace{0.1cm}V^2} > 0.$$
  • This result says:   Two signal values separated by  $T_{\rm A} = 1 \hspace{0.05cm}\rm ns$  are positively correlated:
  • If  $b(t)$  is positive and large,  then with high probability  $b(t+1 \hspace{0.05cm}\rm ns)$  is also positive and large.
  • In contrast,  there is a negative correlation between  $b(t)$  and  $b(t+7 \hspace{0.05cm}\rm ns)$.  If  $b(t)$  is positive,  then  $b(t+7 \hspace{0.05cm}\rm ns)$  is probably negative.