Difference between revisions of "Aufgaben:Exercise 1.2Z: Lognormal Fading Revisited"

From LNTwww
Line 4: Line 4:
  
 
[[File:P_ID2123__Mob_Z_1_2.png|right|frame|Pfadverlustmodell <br>mit Lognormal-Fading]]
 
[[File:P_ID2123__Mob_Z_1_2.png|right|frame|Pfadverlustmodell <br>mit Lognormal-Fading]]
Wir gehen von ähnlichen Bedingungen wie in der&nbsp; [[Aufgaben:1.2_Lognormal_%E2%80%93_Kanalmodell|Aufgabe 1.2]]&nbsp; aus, fassen aber nun den rein entfernungsabhängigen Pfadverlust&nbsp; $V_0$&nbsp; und den Mittelwert&nbsp; $m_{\rm S}$&nbsp; des Lognormal&ndash;Fadings zusammen (der Index &bdquo;S&rdquo; steht für <i>Shadowing</i>):
+
We assume similar conditions as in the&nbsp; [[Tasks:1.2_Lognormal_%E2%80%93_channel model|Task 1. 2]]&nbsp; but now we summarize the purely distance-dependent path loss&nbsp; $V_0$&nbsp; and the mean value&nbsp; $m_{\rm S}$&nbsp; of the lognormal&ndash;fading (the index &bdquo;S&rdquo; stands for <i>Shadowing</i>):
:$$V_{\rm 1} = V_{\rm 0} + m_{\rm S} \hspace{0.05cm}.$$
+
$$V_{\rm 1} = V_{\rm 0} + m_{\rm S} \hspace{0.05cm}.$$
  
Der gesamte Pfadverlust ist dann durch die Gleichung
+
The total path loss is then given by the equation
:$$V_{\rm P} = V_{\rm 1} + V_{\rm 2}(t)$$
+
$$V_{\rm P} = V_{\rm 1} + V_{\rm 2}(t)$$
  
gegeben, wobei&nbsp; $V_2(t)$&nbsp; eine  ''Lognormal&ndash;Verteilung''&nbsp; mit Mittelwert Null beschreibt:
+
where&nbsp; $V_2(t)$&nbsp; describes a ''lognormal&ndash;distribution''&nbsp; with mean value zero:
:$$f_{V{\rm 2}}(V_{\rm 2}) = \frac {1}{ \sqrt{2 \pi }\cdot \sigma_{\rm S}}  \cdot {\rm exp } \left [ - \frac{ V_{\rm 2} ^2}{2 \cdot \sigma_{\rm S}^2} \right ] \hspace{0.05cm}.$$
+
$$f_{V{\rm 2}}(V_{\rm 2}) = \frac {1}{ \sqrt{2 \pi }\cdot \sigma_{\rm S}}  \cdot {\rm exp } \left [ - \frac{ V_{\rm 2} ^2}{2 \cdot \sigma_{\rm S}^2} \right ] \hspace{0.05cm}.$
  
Das in der Grafik gezeigte Pfadverlustmodell ist für das hier beschriebene Szenario geeignet:  
+
The path loss model shown in the graphic is suitable for the scenario described here:  
*Multipliziert man das Sendesignal&nbsp; $s(t)$&nbsp; zunächst mit einem konstanten Faktor&nbsp; $k_1$&nbsp; und weiter mit einer stochastischen Größe&nbsp; $z_2(t)$&nbsp; mit der Wahrscheinlichkeitsdichte (WDF)&nbsp; $f_{\rm z2}(z_2)$, so ergibt sich am Ausgang das Signal&nbsp; $r(t)$, dessen Leistung&nbsp; $P_{\rm E}(t)$&nbsp; aufgrund des stochastischen Anteils natürlich ebenfalls zeitabhängig ist.  
+
*Multiply the transmitted signal&nbsp; $s(t)$&nbsp; first with a constant factor&nbsp; $k_1$&nbsp; and further with a stochastic quantity&nbsp; $z_2(t)$&nbsp; with the probability density (WDF)&nbsp; $f_{\rm z2}(z_2)$, then the signal&nbsp; $r(t)$ results at the output, whose power&nbsp; $P_{\rm E}(t)$&nbsp; is of course also time-dependent due to the stochastic component.  
*Die WDF der lognormalverteilten Zufallsgröße&nbsp; $z_2$&nbsp; lautet für&nbsp; $z_2 &#8805; 0$:
+
*The WDF of the lognormally distributed random variable&nbsp; $z_2$&nbsp; is for&nbsp; $z_2 &#8805; 0$:
:$$f_{z{\rm 2}}(z_{\rm 2}) = \frac {{\rm exp } \left [ - {\rm ln}^2 (z_{\rm 2}) /({2 \cdot C^2 \cdot \sigma_{\rm S}^2}) \right ]}{ \sqrt{2 \pi }\cdot C \cdot \sigma_{\rm S} \cdot z_2}    \hspace{0.3cm}{\rm mit}  \hspace{0.3cm} C = \frac{{\rm ln} \hspace{0.1cm}(10)}{20\,\,{\rm dB}}\hspace{0.05cm}.$$
+
$$f_{z{\rm 2}}(z_{\rm 2}) = \frac {{\rm exp } \left [ - {\rm ln}^2 (z_{\rm 2}) /({2 \cdot C^2 \cdot \sigma_{\rm S}^2}) \right ]}{ \sqrt{2 \pi }\cdot C \cdot \sigma_{\rm S} \cdot z_2}    \hspace{0.3cm}{\rm with}  \hspace{0.3cm} C = \frac{{\rm ln} \hspace{0.1cm}(10)}{20\,\,{\rm dB}}\hspace{0.05cm}.$$
  
*Für&nbsp; $z_2 &#8804; 0$&nbsp; ist diese WDF identisch Null.
+
*For&nbsp; $z_2 &#8804; 0$&nbsp; this WDF is equal to zero.
  
  
Line 26: Line 26:
  
  
''Hinweise:''
+
''Notes:''
* Die Aufgabe gehört zum Kapitel&nbsp; [[Mobile_Kommunikation/Distanzabh%C3%A4ngige_D%C3%A4mpfung_und_Abschattung|Distanzabhängige Dämpfung und Abschattung]].
+
* The task belongs to the chapter&nbsp; [[Mobile_Communication/Distancedependent%C3%A4ngige_D%C3%A4mpfung_und_Abschattung|Distance-dependent attenuation and shading]].
* Verwenden Sie folgende Kenngrößen:
+
* Use the following parameters:
:$$V_{\rm 1} = 60\,{\rm dB}\hspace{0.05cm},\hspace{0.2cm}  \sigma_{\rm S} = 6\,{\rm dB}\hspace{0.05cm}.$$
+
$$V_{\rm 1} = 60\,{\rm dB}\hspace{0.05cm},\hspace{0.2cm}  \sigma_{\rm S} = 6\,{\rm dB}\hspace{0.05cm}.$$
 
   
 
   
* Die Wahrscheinlichkeit, dass eine mittelwertfreie Gaußsche Zufallsgröße&nbsp; $z$&nbsp; größer ist als ihre Streuung&nbsp; $\sigma$, lautet:
+
* The probability that a mean-free Gaussian random variable&nbsp; $z$&nbsp; is greater than its dispersion&nbsp; $\sigma$, is
:$${\rm Pr}(z > \sigma) = {\rm Pr}(z < -\sigma) = {\rm Q}(1) \approx 0.158\hspace{0.05cm}.$$
+
$${\rm Pr}(z > \sigma) = {\rm Pr}(z < -\sigma) = {\rm Q}(1) \approx 0.158\hspace{0.05cm}.$$
* Außerdem gilt: &nbsp; ${\rm Pr}(z > 2\sigma) = {\rm Pr}(z < -2\sigma) = {\rm Q}(2) \approx 0.023\hspace{0.05cm}.$
+
* Also applies: &nbsp; ${\rm Pr}(z > 2\sigma) = {\rm Pr}(z < -2\sigma) = {\rm Q}(2) \approx 0.023\hspace{0.05cm}.$
* Nochmals zur Verdeutlichung: &nbsp; $z_2$&nbsp; ist die lineare Fading&ndash;Größe, während die Beschreibungsgröße&nbsp; $V_2$&nbsp; auf dem Zehner&ndash;Logarithmus basiert.  
+
* Again for clarification: &nbsp; $z_2$&nbsp; is the linear fading&ndash;size, while the description size&nbsp; $V_2$&nbsp; is based on the tenner&ndash;logarithm.  
*Es gelten folgende Umrechnungen:
+
*The following conversions apply:
:$$z_2 = 10^{-V_{\rm 2}/20\,{\rm dB}}\hspace{0.05cm}, \hspace{0.2cm}
+
$$z_2 = 10^{-V_{\rm 2}/20\,{\rm dB}}\hspace{0.05cm}, \hspace{0.2cm}
V_{\rm 2} = -20\,{\rm dB} \cdot {\rm lg}\hspace{0.15cm}z_2\hspace{0.05cm}.$$
+
V_{\rm 2} = -20\,{\rm dB} \cdot {\rm lg}\hspace{0.15cm}z_2\hspace{0.05cm}.$
  
  
  
===Fragebogen===
+
===Questionnaire===
 
<quiz display=simple>
 
<quiz display=simple>
{Wie groß sollte die Konstante&nbsp; $k_1$&nbsp; sein?
+
{How large should the constant&nbsp; $k_1$&nbsp; be?
 
|type="{}"}
 
|type="{}"}
 
$k_1\ = \ $ { 0.001 3% }  
 
$k_1\ = \ $ { 0.001 3% }  
  
{Welcher Wertebereich gilt für die Zufallsgröße&nbsp; $z_2$?
+
{Which value range applies to the random variable&nbsp; $z_2$?
 
|type="[]"}
 
|type="[]"}
- Es sind alle Werte zwischen&nbsp; $-&#8734;$ und $+&#8734;$&nbsp; möglich.
+
- All values between&nbsp; $-&#8734;$ and $+&#8734;$&nbsp; are possible.
+ Die Zufallsgröße&nbsp; $z_2$&nbsp; ist nicht negativ.
+
+ The random size&nbsp; $z_2$&nbsp; is not negative.
- Der kleinstmögliche Wert ist&nbsp; $z_2 = 0.5$.
+
- The smallest possible value is&nbsp; $z_2 = 0.5$.
- Der größtmögliche Wert ist&nbsp; $z_2 = 2$.
+
- The largest possible value is&nbsp; $z_2 = 2$.
  
{Berechnen Sie die WDF&nbsp; $f_{\rm z2}(z_2)$&nbsp; für einige Abszissenwerte.
+
{Calculate the WDF&nbsp; $f_{\rm z2}(z_2)$&nbsp; for some abscissa values.
 
|type="{}"}
 
|type="{}"}
 
$f_{\rm z2}(z_2 = 0)\ = \ $ { 0. }
 
$f_{\rm z2}(z_2 = 0)\ = \ $ { 0. }
Line 60: Line 60:
 
$f_{\rm z2}(z_2 = 2)\ = \ $ { 0.174 3% }  
 
$f_{\rm z2}(z_2 = 2)\ = \ $ { 0.174 3% }  
  
{Berechnen Sie die folgenden Wahrscheinlichkeiten.
+
{Calculate the following probabilities.
 
|type="{}"}
 
|type="{}"}
 
${\rm Pr}(z_2 > 1.0)\ = \ $ { 0.5 3% }
 
${\rm Pr}(z_2 > 1.0)\ = \ $ { 0.5 3% }
Line 67: Line 67:
  
  
{Welche Aussagen gelten für die mittlere Empfangsleistung&nbsp; ${\rm E}\big[P_{\rm E}(t)\big]$? <br><u>Hinweis:</u> &nbsp;$P_{\rm E}'$ ist die Leistung nach der Multiplikation mit&nbsp; $k_1$&nbsp; (siehe Grafik).
+
{What statements are valid for the average receiving power&nbsp; ${\rm E}\big [P_{\rm E}(t)\big]$? <br><u>Note:</u> &nbsp;$P_{\rm E}'$ is the power after multiplication by&nbsp; $k_1$&nbsp; (see diagram).
 
|type="[]"}
 
|type="[]"}
- Es gilt: &nbsp; ${\rm E}[P_{\rm E}(t)] = P_{\rm E}'$.
+
- The following applies: &nbsp; ${\rm E}[P_{\rm E}(t)] = P_{\rm E}'$
- Es gilt: &nbsp; ${\rm E}[P_{\rm E}(t)] < P_{\rm E}'$.
+
- It reads: &nbsp; ${\rm E}[P_{\rm E}(t)] < P_{\rm E}'$.
+ Es gilt: &nbsp; ${\rm E}[P_{\rm E}(t)] > P_{\rm E}'$.
+
+ It reads: &nbsp; ${\rm E}[P_{\rm E}(t)] > P_{\rm E}'$.
 
</quiz>
 
</quiz>
  
===Musterlösung===
+
===Sample solution===
 
{{ML-Kopf}}
 
{{ML-Kopf}}
'''(1)'''&nbsp; Die Konstante $k_1$ erzeugt den zeitunabhängigen Pfadverlust $V_1 = 60 \ \rm dB$. Daraus folgt:
+
'''(1)'''&nbsp; The constant $k_1$ generates the time-independent path loss $V_1 = 60 \ \rm dB$. From this follows:
:$$k_{\rm 1} = 10^{-V_{\rm 1}/(20\hspace{0.05cm} {\rm dB})} \hspace{0.15cm} \underline{= 0.001}\hspace{0.05cm}.$$
+
$$k_{\rm 1} = 10^{-V_{\rm 1}/(20\hspace{0.05cm} {\rm dB})} \hspace{0.15cm} \underline{= 0.001}\hspace{0.05cm}.$$
  
  
'''(2)'''&nbsp; Richtig ist nur der <u>zweite Lösungsvorschlag</u>:  
+
'''(2)'''&nbsp; Correct is only the <u>second solution suggestion</u>:  
*Für die Gaußsche Zufallsvariable $V_2$ sind (theoretisch) alle Werte zwischen $&ndash;&#8734;$ und $+&#8734;$ möglich.  
+
*For the Gaussian random variable $V_2$ all values between $&ndash;&#8734;$ and $+&#8734;$ are (theoretically) possible.  
*Durch die Transformation $z_2 = 10^{{\it &ndash;V_2}\rm /20}$ ergeben sich für die lineare Zufallsgröße $z_2$ nur positive Werte und zwar zwischen 0 (falls $V_2$ positiv ist und bis ins Unendliche reicht) und $+&#8734;$ (sehr große negative Werte von $V_2$).
+
*The transformation $z_2 = 10^{{\it &ndash;V_2}\rm /20}$ results in only positive values for the linear random variable $z_2$, namely between 0 (if $V_2$ is positive and reaches to infinity) and $+&#8734;$ (very large negative values of $V_2$).
  
  
  
'''(3)'''&nbsp; Die Zufallsgröße $z_2$ kann nur positiv sein. Deshalb ist der WDF&ndash;Wert $f_{\rm z2}(z_2 = 0)\hspace{0.15cm} \underline{ = 0}$.  
+
'''(3)''&nbsp; The random value $z_2$ can only be positive. Therefore the WDF&ndash;value $f_{\rm z2}(z_2 = 0)\hspace{0.15cm} is \underline{ = 0}$.  
  
 
*Der WDF&ndash;Wert für den Abszissenwert $z_2 = 1$ erhält man durch Einsetzen in die gegebene Gleichung:
 
*Der WDF&ndash;Wert für den Abszissenwert $z_2 = 1$ erhält man durch Einsetzen in die gegebene Gleichung:
Line 129: Line 129:
  
 
*Diese einfache Rechnung mit diskreten Wahrscheinlichkeiten anstelle einer kontinuierlichen WDF deutet darauf hin, dass der <u>Lösungsvorschlag 3</u> richtig sein wird.
 
*Diese einfache Rechnung mit diskreten Wahrscheinlichkeiten anstelle einer kontinuierlichen WDF deutet darauf hin, dass der <u>Lösungsvorschlag 3</u> richtig sein wird.
 +
 +
*The WDF&ndash;value for the abscissa value $z_2 = 1$ is obtained by inserting it into the given equation:
 +
$$f_{z{\rm 2}}(z_{\rm 2} = 1) \hspace{-0.1cm} \ = \ \hspace{-0.1cm}  \frac {\rm exp } \left [ - {\rm ln}^2 (z_2 = 1) /({2 \cdot C^2 \cdot \sigma_{\rm S}^2}) \right ]}{ \sqrt{2 \pi }\cdot C \cdot \sigma_{\rm S} \cdot (z_2 = 1)}=\frac {1}{ \sqrt{2 \pi } \cdot \sigma_{\rm S} }  \cdot \frac {1}{C } =
 +
\frac {1}{ \sqrt{2 \pi } \cdot 6\,\,{\rm dB} }  \cdot \frac {20\,\,{\rm dB}}}{ {\rm ln} \hspace{0.1cm}(10) } 
 +
\hspace{0.15cm} \underline{\approx 0.578}\hspace{0.05cm}.$$
 +
 +
*The first portion is equal to the WDF&ndash;value $f_{{{\it V}2}(V_2 = 0)$.
 +
*$C$ considers the amount of the derivative of the non-linear characteristic $z_2 = g(V_2)$ for $V_2 = 0 \ \rm dB$ or $z_2 = 1$.
 +
*Finally, for $z_2 = 2$:
 +
$$f_{z{\rm 2}}(z_{\rm 2} = 2) \hspace{-0.1cm} \ = \ \hspace{-0.1cm}  \frac {f_{z{\rm 2}}}(z_{\rm 2} = 1)}{ z_{\rm 2} = 2} \cdot
 +
{\rm exp } \left [ - \frac {{{\rm ln}^2 (2)}{2 \cdot C^2 \cdot \sigma_{\rm S}^2} \right ]= \frac {0.578}{ 2} \cdot
 +
{\rm exp } \left [ - \frac {0.48}{0.952} \right ] \hspace{0.15cm} \underline{\approx 0.174}\hspace{0.05cm}. $$
 +
 +
 +
'''(4)'''&nbsp; If you take into account the relationship between $z_2$ and $V_2$, you get
 +
$${\rm Pr}(z_{\rm 2} > 1) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} {\rm Pr}(V_{\rm 2} < 0\,\,{\rm dB})\hspace{0.15cm} \underline{= 0.5}
 +
\hspace{0.05cm},$$
 +
$${\rm Pr}(z_{\rm 2} > 0.5) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} {\rm Pr}(V_{\rm 2} < 6\,\,{\rm dB}) = 1- {\rm Pr}(V_{\rm 2} > 6\,\,{\rm dB})= 1- {\rm Pr}(V_{\rm 2} > \sigma_{\rm S})= 1- {\rm Q}(1)\hspace{0.15cm} \underline{= 0.842}
 +
\hspace{0.05cm},$$
 +
$${\rm Pr}(z_{\rm 2} > 4) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} {\rm Pr}(V_{\rm 2} < -12\,\,{\rm dB}) = {\rm Pr}(V_{\rm 2} > +12\,\,{\rm dB}) = {\rm Pr}(V_{\rm 2} > 2 \sigma_{\rm S})
 +
\hspace{0.05cm}.$$
 +
 +
*The probability that a Gaussian variable is greater than $2 \cdot \sigma$, but equals ${\rm Q}(2)$:
 +
$${\rm Pr}(z_{\rm 2} > 4) = {\rm Q}(2)\hspace{0.15cm} \underline{= 0.023}
 +
\hspace{0.05cm}.$$
 +
 +
 +
'''(5)'''&nbsp; Correct is the <u>solution 3</u>:
 +
*The first statement is certainly not correct, since the mean value $m_{\rm S}$ refers to the logarithmic received power (in $\rm dBm$).
 +
*To clarify whether the second or the third solution alternative is correct, we assume $P_{\rm S} = 1 \ \ \rm W$, $V_1 = 60 \ \ \rm dB$ &nbsp;&#8658;&nbsp; $P_{\rm E}' = 1 \ {\rm &micro; W}$ and the following $V_2$&ndash;WDF
 +
$$f_{V{\rm 2}}(V_{\rm 2}) = 0.5 \cdot \delta (V_{\rm 2}) + 0.25 \cdot \delta (V_{\rm 2}- 10\,\,{\rm dB})
 +
+ 0.25 \cdot \delta (V_{\rm 2}+ 10\,\,{\rm dB})\hspace{0.05cm}.$
 +
 +
*Halfway through the time, $P_{\rm E} = 1 \ \ \rm &micro; W$, while in the other two quarters, each is valid:
 +
$$V_{\rm 2}= +10\,\,{\rm dB}\text{:} \hspace{0.3cm} P_{\rm E}(t) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac{1\,\,{\rm W}}{10^7} = 0.1\,\,{\,}{\rm &micro; W}\hspace{0.05cm},$$
 +
$$V_{\rm 2}= -10\,\,{\,}{\rm dB}\text{:} \hspace{0.3cm} P_{\rm E}(t) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac{1\,\,{\rm W}}{10^5} = 10\,\,{\,}{\rm &micro; W}\hspace{0.05cm}.$$
 +
 +
*The mean value thus gives:
 +
$${\rm E}[P_{\rm E}(t)] = 0.5 \cdot 1\,{\rm &micro; W}+ 0.25 \cdot 0.1\,{\rm &micro; W}+ 0.25 \cdot 10\,{\rm &micro; W}= 3.025\,{\rm &micro; W} > P_{\rm E}\hspace{0.05cm}' = 1\,{\rm &micro; W}
 +
\hspace{0.05cm}.$$
 +
 +
*This simple calculation with discrete probabilities instead of a continuous WDF indicates that the <u>solution 3</u> will be correct.
 
{{ML-Fuß}}
 
{{ML-Fuß}}
  

Revision as of 17:15, 25 March 2020

Pfadverlustmodell
mit Lognormal-Fading

We assume similar conditions as in the  Task 1. 2  but now we summarize the purely distance-dependent path loss  $V_0$  and the mean value  $m_{\rm S}$  of the lognormal–fading (the index „S” stands for Shadowing): $$V_{\rm 1} = V_{\rm 0} + m_{\rm S} \hspace{0.05cm}.$$

The total path loss is then given by the equation $$V_{\rm P} = V_{\rm 1} + V_{\rm 2}(t)$$

where  $V_2(t)$  describes a lognormal–distribution  with mean value zero: $$f_{V{\rm 2}}(V_{\rm 2}) = \frac {1}{ \sqrt{2 \pi }\cdot \sigma_{\rm S}} \cdot {\rm exp } \left [ - \frac{ V_{\rm 2} ^2}{2 \cdot \sigma_{\rm S}^2} \right ] \hspace{0.05cm}.$ The path loss model shown in the graphic is suitable for the scenario described here: *Multiply the transmitted signal  $s(t)$  first with a constant factor  $k_1$  and further with a stochastic quantity  $z_2(t)$  with the probability density (WDF)  $f_{\rm z2}(z_2)$, then the signal  $r(t)$ results at the output, whose power  $P_{\rm E}(t)$  is of course also time-dependent due to the stochastic component. *The WDF of the lognormally distributed random variable  $z_2$  is for  $z_2 ≥ 0$: $$f_{z{\rm 2}}(z_{\rm 2}) = \frac {{\rm exp } \left [ - {\rm ln}^2 (z_{\rm 2}) /({2 \cdot C^2 \cdot \sigma_{\rm S}^2}) \right ]}{ \sqrt{2 \pi }\cdot C \cdot \sigma_{\rm S} \cdot z_2} \hspace{0.3cm}{\rm with} \hspace{0.3cm} C = \frac{{\rm ln} \hspace{0.1cm}(10)}{20\,\,{\rm dB}}\hspace{0.05cm}.$$ *For  $z_2 ≤ 0$  this WDF is equal to zero. ''Notes:'' * The task belongs to the chapter  [[Mobile_Communication/Distancedependent%C3%A4ngige_D%C3%A4mpfung_und_Abschattung|Distance-dependent attenuation and shading]]. * Use the following parameters: $$V_{\rm 1} = 60\,{\rm dB}\hspace{0.05cm},\hspace{0.2cm} \sigma_{\rm S} = 6\,{\rm dB}\hspace{0.05cm}.$$ * The probability that a mean-free Gaussian random variable  $z$  is greater than its dispersion  $\sigma$, is $${\rm Pr}(z > \sigma) = {\rm Pr}(z < -\sigma) = {\rm Q}(1) \approx 0.158\hspace{0.05cm}.$$ * Also applies:   ${\rm Pr}(z > 2\sigma) = {\rm Pr}(z < -2\sigma) = {\rm Q}(2) \approx 0.023\hspace{0.05cm}.$ * Again for clarification:   $z_2$  is the linear fading–size, while the description size  $V_2$  is based on the tenner–logarithm. *The following conversions apply: $$z_2 = 10^{-V_{\rm 2}/20\,{\rm dB}}\hspace{0.05cm}, \hspace{0.2cm} V_{\rm 2} = -20\,{\rm dB} \cdot {\rm lg}\hspace{0.15cm}z_2\hspace{0.05cm}.$ ==='"`UNIQ--h-0--QINU`"'Questionnaire=== '"`UNIQ--quiz-00000002-QINU`"' ==='"`UNIQ--h-1--QINU`"'Sample solution=== '"`UNIQ--html-00000003-QINU`"' '''(1)'''  The constant $k_1$ generates the time-independent path loss $V_1 = 60 \ \rm dB$. From this follows: '"`UNIQ-MathJax28-QINU`"' '''(2)'''  Correct is only the <u>second solution suggestion</u>: *For the Gaussian random variable $V_2$ all values between $–∞$ and $+∞$ are (theoretically) possible. *The transformation $z_2 = 10^{{\it –V_2}\rm /20}$ results in only positive values for the linear random variable $z_2$, namely between 0 (if $V_2$ is positive and reaches to infinity) and $+∞$ (very large negative values of $V_2$). '''(3)''  The random value $z_2$ can only be positive. Therefore the WDF–value $f_{\rm z2}(z_2 = 0)\hspace{0.15cm} is \underline{ = 0}$. *Der WDF–Wert für den Abszissenwert $z_2 = 1$ erhält man durch Einsetzen in die gegebene Gleichung: :'"`UNIQ-MathJax29-QINU`"' *Der erste Anteil ist gleich dem WDF–Wert $f_{{\it V}2}(V_2 = 0)$. *$C$ berücksichtigt den Betrag der Ableitung der nichtlinearen Kennlinie $z_2 = g(V_2)$ für $V_2 = 0 \ \rm dB$ bzw. $z_2 = 1$. *Schließlich erhält man für $z_2 = 2$: :'"`UNIQ-MathJax30-QINU`"' '''(4)'''  Berücksichtigt man den Zusammenhang zwischen $z_2$ und $V_2$, so erhält man: :'"`UNIQ-MathJax31-QINU`"' :'"`UNIQ-MathJax32-QINU`"' :'"`UNIQ-MathJax33-QINU`"' *Die Wahrscheinlichkeit, dass eine Gaußvariable größer ist als $2 \cdot \sigma$, ist aber gleich ${\rm Q}(2)$: :'"`UNIQ-MathJax34-QINU`"' '''(5)'''  Richtig ist der <u>Lösungsvorschlag 3</u>: *Die erste Aussage ist mit Sicherheit nicht zutreffend, da sich der Mittelwert $m_{\rm S}$ auf die logarithmierte Empfangsleistung (in $\rm dBm$) bezieht. *Um zu klären, ob nun die zweite oder die dritte Lösungsalternative zutrifft, gehen wir von $P_{\rm S} = 1 \ \rm W$, $V_1 = 60 \ \rm dB$  ⇒  $P_{\rm E}' = 1 \ {\rm µ W}$ und folgender $V_2$–WDF aus: :'"`UNIQ-MathJax35-QINU`"' *In der Hälfte der Zeit ist dann $P_{\rm E} = 1 \ \rm µ W$, während in den beiden anderen Vierteln jeweils gilt: :'"`UNIQ-MathJax36-QINU`"' :'"`UNIQ-MathJax37-QINU`"' *Der Mittelwert ergibt somit: :'"`UNIQ-MathJax38-QINU`"' *Diese einfache Rechnung mit diskreten Wahrscheinlichkeiten anstelle einer kontinuierlichen WDF deutet darauf hin, dass der <u>Lösungsvorschlag 3</u> richtig sein wird. *The WDF–value for the abscissa value $z_2 = 1$ is obtained by inserting it into the given equation: '"`UNIQ-MathJax39-QINU`"' *The first portion is equal to the WDF–value $f_{{{\it V}2}(V_2 = 0)$. *$C$ considers the amount of the derivative of the non-linear characteristic $z_2 = g(V_2)$ for $V_2 = 0 \ \rm dB$ or $z_2 = 1$. *Finally, for $z_2 = 2$: '"`UNIQ-MathJax40-QINU`"' '''(4)'''  If you take into account the relationship between $z_2$ and $V_2$, you get '"`UNIQ-MathJax41-QINU`"' '"`UNIQ-MathJax42-QINU`"' '"`UNIQ-MathJax43-QINU`"' *The probability that a Gaussian variable is greater than $2 \cdot \sigma$, but equals ${\rm Q}(2)$: '"`UNIQ-MathJax44-QINU`"' '''(5)'''  Correct is the <u>solution 3</u>: *The first statement is certainly not correct, since the mean value $m_{\rm S}$ refers to the logarithmic received power (in $\rm dBm$). *To clarify whether the second or the third solution alternative is correct, we assume $P_{\rm S} = 1 \ \ \rm W$, $V_1 = 60 \ \ \rm dB$  ⇒  $P_{\rm E}' = 1 \ {\rm µ W}$ and the following $V_2$–WDF '"`UNIQ-MathJax45-QINU`"'V_{\rm 2}= +10\,\,{\rm dB}\text{:} \hspace{0.3cm} P_{\rm E}(t) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac{1\,\,{\rm W}}{10^7} = 0.1\,\,{\,}{\rm µ W}\hspace{0.05cm},'"`UNIQ-MathJax46-QINU`"'V_{\rm 2}= -10\,\,{\,}{\rm dB}\text{:} \hspace{0.3cm} P_{\rm E}(t) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac{1\,\,{\rm W}}{10^5} = 10\,\,{\,}{\rm µ W}\hspace{0.05cm}.'"`UNIQ-MathJax47-QINU`"'{\rm E}[P_{\rm E}(t)] = 0.5 \cdot 1\,{\rm µ W}+ 0.25 \cdot 0.1\,{\rm µ W}+ 0.25 \cdot 10\,{\rm µ W}= 3.025\,{\rm µ W} > P_{\rm E}\hspace{0.05cm}' = 1\,{\rm µ W} \hspace{0.05cm}.$$

  • This simple calculation with discrete probabilities instead of a continuous WDF indicates that the solution 3 will be correct.