Difference between revisions of "Aufgaben:Exercise 2.5Z: Nyquist Equalization"

From LNTwww
Line 79: Line 79:
 
{{ML-Kopf}}
 
{{ML-Kopf}}
 
[[File:P_ID922__LZI_Z_2_5_a.png|right|frame|Cosine-square spectrum]]
 
[[File:P_ID922__LZI_Z_2_5_a.png|right|frame|Cosine-square spectrum]]
'''(1)'''  Mit dem konstanten Spektrum  $X(f) = T$  erhält man für die Spektralfunktion des Empfängerausgangssignals  $y(t)$:
+
'''(1)'''  Using the constant spectrum  $X(f) = T$  the following is obtained for the spectral function of the receiver output signal  $y(t)$:
 
:$$Y(f)=  T \cdot {H(f)}.$$
 
:$$Y(f)=  T \cdot {H(f)}.$$
  
*Der Signalwert bei  $t = 0$  ist gleich der Fläche unter $Y(f)$.  
+
*The signal value at  $t = 0$  is equal to the area under $Y(f)$.  
*Wie aus der nebenstehenden Skizze hervorgeht, ist diese gleich  $1$. Daraus folgt:  
+
*As can be seen from the adjacent sketch, this is equal to  $1$. From this it follows that:  
 
:$$y(t = 0)\; \underline{= 1}.$$
 
:$$y(t = 0)\; \underline{= 1}.$$
  
  
  
[[File:EN_LZI_Z_2_5c.png|right|frame|Frequency Response of the Nyquist equaliser]]
+
[[File:EN_LZI_Z_2_5c.png|right|frame|Frequency response of the Nyquist equaliser]]
'''(2)'''  Aus der Bedingung  $H_{\rm S}(f) \cdot H_{\rm E}(f) = H(f)$  folgt im betrachteten Bereich:
+
'''(2)'''  From the condition  $H_{\rm S}(f) \cdot H_{\rm E}(f) = H(f)$  it follows in the considered range:
 
:$$H_{\rm  E}(f)=  \frac{H(f)}{H_{\rm  S}(f)} =  \frac{\cos^2(\pi f T/2)}{\sin(\pi f T)/(\pi f T)}.$$
 
:$$H_{\rm  E}(f)=  \frac{H(f)}{H_{\rm  S}(f)} =  \frac{\cos^2(\pi f T/2)}{\sin(\pi f T)/(\pi f T)}.$$
  
*Wegen  $\cos(0) = 1$  und  ${\rm si}(0) = 1$  gilt auch  $H_{\rm E}(f = 0)\;\underline{=1}$.  
+
*Due to  $\cos(0) = 1$  and  ${\rm si}(0) = 1$,    $H_{\rm E}(f = 0)\;\underline{=1}$ also holds.  
  
*Mit der gegebenen trigonometrischen Umformung gilt weiter:  
+
*Considering the given trigonometric transformation it further holds that:  
 
:$$H_{\rm  E}(f) = {\pi f T}/{2} \cdot {\rm cot}\left( {\pi f
 
:$$H_{\rm  E}(f) = {\pi f T}/{2} \cdot {\rm cot}\left( {\pi f
 
  T}/{2}\right),$$
 
  T}/{2}\right),$$
Line 112: Line 112:
  
  
'''(3)'''  Unter Berücksichtigung des Gaußkanals gilt:
+
'''(3)'''  Considering the Gaussian channel the following holds:
 
$$H_{\rm  E}(f)=  \frac{H(f)}{H_{\rm  S}(f) \cdot H_{\rm  K}(f)} =  H_{\rm
 
$$H_{\rm  E}(f)=  \frac{H(f)}{H_{\rm  S}(f) \cdot H_{\rm  K}(f)} =  H_{\rm
 
  E}^{(2)}(f)\cdot {\rm e}^{\pi (f\hspace{0.05cm}\cdot \hspace{0.05cm} T)^2}.$$
 
  E}^{(2)}(f)\cdot {\rm e}^{\pi (f\hspace{0.05cm}\cdot \hspace{0.05cm} T)^2}.$$
  
Hierbei bezeichnet  $H_{\rm E}^{(2)}(f)$  den bei der Teilaufgabe  '''(2)'''  berechneten Entzerrerfrequenzgang unter der Voraussetzung eines idealen Kanals. Man erhält folgende numerische Ergebnisse:
+
Here,  $H_{\rm E}^{(2)}(f)$  denotes the equaliser frequency response computed in the subtask  '''(2)'''  assuming an ideal channel. The following numerical results are obtained:
 
:$$H_{\rm  E}(f\cdot T = 0) =  1 \cdot {\rm e}^{0} \hspace{0.15cm}\underline{= 1},$$
 
:$$H_{\rm  E}(f\cdot T = 0) =  1 \cdot {\rm e}^{0} \hspace{0.15cm}\underline{= 1},$$
 
:$$H_{\rm  E}(f \cdot T = 0.25) =  0.948 \cdot 1.217 \hspace{0.15cm}\underline{=  1.154},$$
 
:$$H_{\rm  E}(f \cdot T = 0.25) =  0.948 \cdot 1.217 \hspace{0.15cm}\underline{=  1.154},$$
Line 123: Line 123:
 
:$$H_{\rm  E}(f \cdot T = 1.00) =  0 \cdot 23.141 \hspace{0.15cm}\underline{=  0}.$$
 
:$$H_{\rm  E}(f \cdot T = 1.00) =  0 \cdot 23.141 \hspace{0.15cm}\underline{=  0}.$$
  
Die grüne Kurve in obiger Grafik fasst die Ergebnisse dieser Teilaufgabe zusammen.
+
The green curve in the graph above summarises the results of this subtask.
 
{{ML-Fuß}}
 
{{ML-Fuß}}
  

Revision as of 02:26, 17 September 2021

Block diagram for the considered Nyquist system

A digital baseband transmission system is modelled by the depicted block diagram.

  • The "transmitter", "channel" and "receiver" components are described in the frequency domain by  $H_{\rm S}(f)$,  $H_{\rm K}(f)$  and  $H_{\rm E}(f)$ .
  • The overall frequency response  $H(f) = H_{\rm S}(f) \cdot H_{\rm K}(f) \cdot H_{\rm E}(f)$  has a  $\cos^2$–shaped curve:
$$H(f) = \left\{ \begin{array}{c} \cos^2\left({\pi}/{2} \cdot f \cdot T \right) \\ 0 \\ \end{array} \right.\quad \quad \begin{array}{*{10}c} {\rm{f\ddot{u}r}} \\ {\rm{f\ddot{u}r}} \\ \end{array}\begin{array}{*{20}c} {\left| \hspace{0.005cm} f\hspace{0.05cm} \right| < 1/T,} \\ {\left|\hspace{0.005cm} f \hspace{0.05cm} \right| \ge 1/T.} \\ \end{array}$$
  • The signal  $y(t)$  before the decision circuit thus exhibits equidistant zero crossings at intervals of  $T$ .
  • It is assumed here that the source emits a  Dirac-delta  $x(t)$  with weight  $T$  (see graph).


It is pointed out that this is a so-called "Nyquist system".

As will be discussed in detail in the book  Digital Signal Transmission,  these Nyquist systems represent an important class of digital transmission systems since the sequentially transmitted symbols do not influence each other in such systems.

However, these far-reaching aspects are not needed for the solution of this task.

Here, it is only assumed that

  • the transmission pulse  $s(t)$  be rectangular with pulse duration  $T$:
$$H_{\rm S}(f) = {\rm si}(\pi f T),$$
  • the channel is assumed to be ideal up to and including subtask  (2)  while for the last subtask  (3)  the following shall hold:
$$H_{\rm K}(f) = H_{\rm G}(f) = {\rm e}^{-\pi(f \cdot T)^2} .$$

For both channels, the receiver– and simultaneously the equaliser frequency response  $H_{\rm E}(f)$ are searched-for so that the overall frequency response has the desired Nyquist shape.




Please note:

  • The following trigonometric relation is assumed to be known:
$$\frac{\cos^2(\alpha /2)}{\sin(\alpha )} = {1}/{2} \cdot {\rm cot}(\alpha /2) .$$


Questions

1

Compute the output signal value at time  $t = 0$.

$y(t = 0) \ = \ $

2

First, let  $H_{\rm K}(f) = 1$ hold   ⇒   ideal channel. Compute the frequency response  $H_{\rm E}(f)$ for this case.
What values are obtained at the frequencies given below?

$|H_{\rm E}(f \cdot T = 0)| \ = \ $

$|H_{\rm E}(f \cdot T = 0.25)|\ = \ $

$|H_{\rm E}(f \cdot T = 0.50)|\ = \ $

$|H_{\rm E}(f \cdot T = 0.75)|\ = \ $

$|H_{\rm E}(f \cdot T = 1.00)|\ = \ $

3

Compute  $H_{\rm E}(f)$  for the Gaussian-shaped channel  $H_{\rm K}(f) = H_{\rm G}(f)$  according to the description.

$|H_{\rm E}(f \cdot T = 0)|\ = \ $

$|H_{\rm E}(f \cdot T = 0.25)| \ = \ $

$|H_{\rm E}(f \cdot T = 0.50)|\ = \ $

$|H_{\rm E}(f \cdot T = 0.75)|\ = \ $

$|H_{\rm E}(f \cdot T = 1.00)|\ = \ $


Solution

Cosine-square spectrum

(1)  Using the constant spectrum  $X(f) = T$  the following is obtained for the spectral function of the receiver output signal  $y(t)$:

$$Y(f)= T \cdot {H(f)}.$$
  • The signal value at  $t = 0$  is equal to the area under $Y(f)$.
  • As can be seen from the adjacent sketch, this is equal to  $1$. From this it follows that:
$$y(t = 0)\; \underline{= 1}.$$


Frequency response of the Nyquist equaliser

(2)  From the condition  $H_{\rm S}(f) \cdot H_{\rm E}(f) = H(f)$  it follows in the considered range:

$$H_{\rm E}(f)= \frac{H(f)}{H_{\rm S}(f)} = \frac{\cos^2(\pi f T/2)}{\sin(\pi f T)/(\pi f T)}.$$
  • Due to  $\cos(0) = 1$  and  ${\rm si}(0) = 1$,    $H_{\rm E}(f = 0)\;\underline{=1}$ also holds.
  • Considering the given trigonometric transformation it further holds that:
$$H_{\rm E}(f) = {\pi f T}/{2} \cdot {\rm cot}\left( {\pi f T}/{2}\right),$$
$$H_{\rm E}(f \cdot T = 0.25) = {\pi }/{8} \cdot {\rm cot}\left( 22.5^{\circ}\right) = {\pi }/{8} \cdot 2.414 = \hspace{0.15cm}\underline{0.948},$$
$$H_{\rm E}(f \cdot T = 0.50) = {\pi }/{4} \cdot {\rm cot}\left( 45^{\circ}\right) = {\pi }/{4} \cdot 1 \hspace{0.15cm}\underline{= 0.785},$$
$$ H_{\rm E}(f \cdot T = 0.75) = {3 \pi }/{8} \cdot {\rm cot}\left( 67.5^{\circ}\right) = {3 \pi }/{8} \cdot 0.414 \hspace{0.15cm}\underline{= 0.488},$$
$$ H_{\rm E}(f \cdot T = 1.00)= { \pi }/{2} \cdot {\rm cot}\left( 90^{\circ}\right) ={ \pi }/{2} \cdot 0 \hspace{0.15cm}\underline{ = 0}.$$


(3)  Considering the Gaussian channel the following holds: $$H_{\rm E}(f)= \frac{H(f)}{H_{\rm S}(f) \cdot H_{\rm K}(f)} = H_{\rm E}^{(2)}(f)\cdot {\rm e}^{\pi (f\hspace{0.05cm}\cdot \hspace{0.05cm} T)^2}.$$

Here,  $H_{\rm E}^{(2)}(f)$  denotes the equaliser frequency response computed in the subtask  (2)  assuming an ideal channel. The following numerical results are obtained:

$$H_{\rm E}(f\cdot T = 0) = 1 \cdot {\rm e}^{0} \hspace{0.15cm}\underline{= 1},$$
$$H_{\rm E}(f \cdot T = 0.25) = 0.948 \cdot 1.217 \hspace{0.15cm}\underline{= 1.154},$$
$$H_{\rm E}(f \cdot T = 0.50) = 0.785 \cdot 2.193 \hspace{0.15cm}\underline{= 1.722},$$
$$H_{\rm E}(f \cdot T = 0.75) = 0.488 \cdot 5.854 \hspace{0.15cm}\underline{= 2.857},$$
$$H_{\rm E}(f \cdot T = 1.00) = 0 \cdot 23.141 \hspace{0.15cm}\underline{= 0}.$$

The green curve in the graph above summarises the results of this subtask.