Difference between revisions of "Aufgaben:Exercise 2.1: Two-Dimensional Impulse Response"
m (Text replacement - "time-discrete" to "discrete-time") |
|||
(19 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
− | {{quiz-Header|Buchseite= | + | {{quiz-Header|Buchseite=Mobile_Communications/General_Description_of_Time_Variant_Systems}} |
[[File:P_ID2144__Mob_A_2_1.png|right|frame|Two-dimensional impulse response]] | [[File:P_ID2144__Mob_A_2_1.png|right|frame|Two-dimensional impulse response]] | ||
The two-dimensional impulse response | The two-dimensional impulse response | ||
− | h(τ,t)=M∑m=1zm(t)⋅δ(τ−τm) | + | :h(τ,t)=M∑m=1zm(t)⋅δ(τ−τm) |
− | is to be analyzed according to the adjoining diagram. The two axes are time | + | is to be analyzed according to the adjoining diagram. The two axes are discrete-time: |
* τ is the <i>delay</i> and can take values between 0 and 6 \ {\rm µ s} in the example. | * τ is the <i>delay</i> and can take values between 0 and 6 \ {\rm µ s} in the example. | ||
− | * The | + | * The (absolute) time t is related to the frequency of snapshots and characterizes the variation of the channel over time. We have t=n⋅T, where T≫τmax . |
The arrows in the graphic mark different Dirac functions with weights 1 (red), 1/2 (blue) and 1/4 (green). This means that the delay τ is also discrete here. | The arrows in the graphic mark different Dirac functions with weights 1 (red), 1/2 (blue) and 1/4 (green). This means that the delay τ is also discrete here. | ||
− | When measuring the impulse responses at different times t at intervals of one second, the resolution of the τ axis was | + | When measuring the impulse responses at different times t at intervals of one second, the resolution of the τ–axis was two microseconds (\delta \tau = 2 \ \rm µ s). The echoes were not localized more precisely. |
In this task the following quantities are also referred to: | In this task the following quantities are also referred to: | ||
− | * the | + | * the "time-variant transfer function" according to the definition |
:$$H(f,\hspace{0.05cm} t) | :$$H(f,\hspace{0.05cm} t) | ||
\hspace{0.2cm} \stackrel {f,\hspace{0.05cm}\tau}{\bullet\!\!-\!\!\!-\!\!\!-\!\!\circ} \hspace{0.2cm} h(\tau,\hspace{0.05cm}t) | \hspace{0.2cm} \stackrel {f,\hspace{0.05cm}\tau}{\bullet\!\!-\!\!\!-\!\!\!-\!\!\circ} \hspace{0.2cm} h(\tau,\hspace{0.05cm}t) | ||
\hspace{0.05cm},$$ | \hspace{0.05cm},$$ | ||
− | + | * the approximation of the "coherence bandwidth" as the reciprocal of the maximal duration of the delay profile h(τ,t): | |
− | * the approximation of the | ||
:$$B_{\rm K} \hspace{0.01cm}' = \frac{1}{\tau_{\rm max} - \tau_{\rm min}} | :$$B_{\rm K} \hspace{0.01cm}' = \frac{1}{\tau_{\rm max} - \tau_{\rm min}} | ||
\hspace{0.05cm}.$$ | \hspace{0.05cm}.$$ | ||
Line 32: | Line 31: | ||
''Notes:'' | ''Notes:'' | ||
− | * | + | * This task belongs to the chapter [[Mobile_Communications/General_Description_of_Time_Variant_Systems|General description of time–variant systems]]. |
− | * More detailed information on various definitions for the coherence bandwidth can be found in chapter [[Mobile_Communications/ | + | * More detailed information on various definitions for the coherence bandwidth can be found in chapter [[Mobile_Communications/The_GWSSUS_Channel_Model|The GWSSUS channel model]], especially in the sample solution for the [[Aufgaben:Exercise_2.7Z:_Coherence_Bandwidth_of_the_LTI_Two-Path_Channel|Exercise 2.7Z]]. |
− | * It should be noted that this is a constructed task. According to the above | + | * It should be noted that this is a constructed task. According to the above graph, the 2D impulse response changes significantly during the time span T. Therefore T is to be interpreted here as very large, for example one hour. |
*In mobile radio, h(τ,t) changes in the millisecond range taking into account the Doppler effect, but the changes during this time are rather moderate. | *In mobile radio, h(τ,t) changes in the millisecond range taking into account the Doppler effect, but the changes during this time are rather moderate. | ||
Line 40: | Line 39: | ||
− | ===Questionnaire== | + | ===Questionnaire=== |
<quiz display=simple> | <quiz display=simple> | ||
− | {What restriction does the specification \Delta \tau = 2 \rm µ s | + | {What restriction does the specification \Delta \tau = 2 \rm µ s impose on the maximum bandwidth Bmax of the signal to be examined? |
|type="{}"} | |type="{}"} | ||
Bmax = { 500 3% } kHz | Bmax = { 500 3% } kHz | ||
− | {At what time t2 | + | {At what time t2 the channel is ideal, characterized by H(f,t2)=1? |
|type="{}"} | |type="{}"} | ||
t2 = { 0. } ⋅T | t2 = { 0. } ⋅T | ||
− | {From what time t3 | + | {From what time t3 this channel does cause distortion? |
|type="{}"} | |type="{}"} | ||
t3 = { 3 3% } ⋅T | t3 = { 3 3% } ⋅T | ||
Line 60: | Line 59: | ||
t=5T:BK′ = { 166.7 3% } kHz | t=5T:BK′ = { 166.7 3% } kHz | ||
− | {From what time t5 | + | {From what time t5 this channel could be considered as time–invariant? |
|type="{}"} | |type="{}"} | ||
t5 = { 5 3% } ⋅T | t5 = { 5 3% } ⋅T | ||
− | {For which of the mentioned T& | + | {For which of the mentioned values of T does it make sense to work with the 2D–impulse response? |
|type="[]"} | |type="[]"} | ||
- A (slow) channel change occurs approximately after T = 1 \ \rm µ s. | - A (slow) channel change occurs approximately after T = 1 \ \rm µ s. | ||
Line 70: | Line 69: | ||
</quiz> | </quiz> | ||
− | === | + | ===Solution=== |
− | + | {{ML-Kopf}} | |
− | '''(1)''' The | + | '''(1)''' The signal described in the equivalent low-pass range should not have a bandwidth greater than $B_{\rm max} = 1/\Delta \tau \ \underline {= 500 \ \rm kHz}$. |
− | *This mathematical (two-sided) bandwidth of the low pass | + | *This mathematical (two-sided) bandwidth of the low-pass signal is also the maximum physical (one-sided) bandwidth of the corresponding band-pass signal. |
− | + | '''(2)''' H(f,t2)=1 means in the time domain h(τ,t2)=δ(τ). | |
− | '''(2)''' H(f,t2)=1 means in the time domain h(τ,t2)=δ(τ). | ||
*Only then the channel is ideal. | *Only then the channel is ideal. | ||
− | *You can see from the | + | *You can see from the graph that this only applies to the time t2 =0_. |
− | |||
− | |||
− | |||
+ | '''(3)''' Distortions occur if at time t the impulse response is composed of two or more Dirac functions ⇒ t ≥ t_{\rm 3} \ \underline {= 3T}. | ||
+ | *At time t=T the signal s(t) is delayed only by 2 \ \rm µ s. | ||
+ | *At t=2T the amplitude is additionally reduced by 50% (6 dB loss). | ||
− | '''(4)''' At time t=3T the two Dirac functions occur at τmin=0 and \tau_{\rm max} = 4 \ \rm µ s. | + | '''(4)''' At time t=3T the two Dirac functions occur at τmin=0 and \tau_{\rm max} = 4 \ \rm µ s. |
− | *The (simple approximation for the) coherence bandwidth is the reciprocal of | + | *The (simple approximation for the) coherence bandwidth is the reciprocal of the delay span of these Dirac functions: |
− | $$B_{\rm K}\hspace{0.01cm}' = \frac{1}{4\,\, | + | :$$B_{\rm K}\hspace{0.01cm}' = \frac{1}{4\,\,{\rm µ s} } \hspace{0.25cm} \underline{ = 250\,\,{\rm kHz}} |
\hspace{0.05cm}.$$ | \hspace{0.05cm}.$$ | ||
− | + | *The same as at t=4T the time between the Dirac functions is 4 \ \rm µ s: BK′=250 kHz_. | |
− | * | + | *At t=5T the impulse response has a duration of 6 \ \ \rm µ s \ \ \Rightarrow \ {\it B}_{\rm K} \hspace{0.01cm}' \ \underline {\approx 166.7 \ \rm kHz}. |
− | *At t=5T the impulse response has | ||
− | '''(5)''' The impulse responses are identical at the times 5T, 6T and 7T | + | '''(5)''' The impulse responses are identical at the times 5T, 6T and 7T each consists of three Diracs. |
− | * Assuming that nothing changes in this respect for t ≥ 8T | + | * Assuming that nothing changes in this respect for t ≥ 8T: t5 =5T_. |
− | '''(6)''' | + | '''(6)''' <u>Solution 2</u> is correct: |
− | *The temporal change of the impulse response, whose dynamics is expressed by the parameter T, must be slow in comparison to the maximum | + | *The temporal change of the impulse response, whose dynamics is expressed by the parameter T, must be slow in comparison to the maximum delay span of h(τ,t), which is in this task equals \tau_{\rm max} = 6 \ \rm µ s ⇒ $T \gg \tau_{\rm max}.$ |
− | |||
{{ML-Fuß}} | {{ML-Fuß}} | ||
− | [[Category: | + | [[Category:Mobile Communications: Exercises|^2.1 Description of Time-Variant Systems^]] |
Latest revision as of 11:01, 11 October 2021
The two-dimensional impulse response
- h(τ,t)=M∑m=1zm(t)⋅δ(τ−τm)
is to be analyzed according to the adjoining diagram. The two axes are discrete-time:
- τ is the delay and can take values between 0 and 6 \ {\rm µ s} in the example.
- The (absolute) time t is related to the frequency of snapshots and characterizes the variation of the channel over time. We have t = n \cdot T, where T \gg \tau_{\rm max} .
The arrows in the graphic mark different Dirac functions with weights 1 (red), 1/2 (blue) and 1/4 (green). This means that the delay \tau is also discrete here.
When measuring the impulse responses at different times t at intervals of one second, the resolution of the \tau–axis was two microseconds (\delta \tau = 2 \ \rm µ s). The echoes were not localized more precisely.
In this task the following quantities are also referred to:
- the "time-variant transfer function" according to the definition
- H(f,\hspace{0.05cm} t) \hspace{0.2cm} \stackrel {f,\hspace{0.05cm}\tau}{\bullet\!\!-\!\!\!-\!\!\!-\!\!\circ} \hspace{0.2cm} h(\tau,\hspace{0.05cm}t) \hspace{0.05cm},
- the approximation of the "coherence bandwidth" as the reciprocal of the maximal duration of the delay profile h(\tau, t):
- B_{\rm K} \hspace{0.01cm}' = \frac{1}{\tau_{\rm max} - \tau_{\rm min}} \hspace{0.05cm}.
Notes:
- This task belongs to the chapter General description of time–variant systems.
- More detailed information on various definitions for the coherence bandwidth can be found in chapter The GWSSUS channel model, especially in the sample solution for the Exercise 2.7Z.
- It should be noted that this is a constructed task. According to the above graph, the 2D impulse response changes significantly during the time span T. Therefore T is to be interpreted here as very large, for example one hour.
- In mobile radio, h(\tau, t) changes in the millisecond range taking into account the Doppler effect, but the changes during this time are rather moderate.
Questionnaire
Solution
- This mathematical (two-sided) bandwidth of the low-pass signal is also the maximum physical (one-sided) bandwidth of the corresponding band-pass signal.
(2) H(f, t_{\rm 2}) = 1 means in the time domain h(\tau, t_{\rm 2}) = \delta(\tau).
- Only then the channel is ideal.
- You can see from the graph that this only applies to the time t_{\rm 2} \ \underline {= 0}.
(3) Distortions occur if at time t the impulse response is composed of two or more Dirac functions ⇒ t ≥ t_{\rm 3} \ \underline {= 3T}.
- At time t = T the signal s(t) is delayed only by 2 \ \rm µ s.
- At t = 2T the amplitude is additionally reduced by 50 \% (6 \ \ \rm dB loss).
(4) At time t = 3T the two Dirac functions occur at \tau_{\rm min} = 0 and \tau_{\rm max} = 4 \ \rm µ s.
- The (simple approximation for the) coherence bandwidth is the reciprocal of the delay span of these Dirac functions:
- B_{\rm K}\hspace{0.01cm}' = \frac{1}{4\,\,{\rm µ s} } \hspace{0.25cm} \underline{ = 250\,\,{\rm kHz}} \hspace{0.05cm}.
- The same as at t = 4T the time between the Dirac functions is 4 \ \rm µ s: B_{\rm K} \hspace{0.01cm}' = \underline {250 \ \rm kHz}.
- At t = 5T the impulse response has a duration of 6 \ \ \rm µ s \ \ \Rightarrow \ {\it B}_{\rm K} \hspace{0.01cm}' \ \underline {\approx 166.7 \ \rm kHz}.
(5) The impulse responses are identical at the times 5T, 6T and 7T each consists of three Diracs.
- Assuming that nothing changes in this respect for t ≥ 8T: t_{\rm 5} \ \ \underline {= 5T}.
(6) Solution 2 is correct:
- The temporal change of the impulse response, whose dynamics is expressed by the parameter T, must be slow in comparison to the maximum delay span of h(\tau, t), which is in this task equals \tau_{\rm max} = 6 \ \rm µ s ⇒ T \gg \tau_{\rm max}.