Aufgaben:Exercise 2.1: Two-Dimensional Impulse Response: Difference between revisions
No edit summary |
Join split $$ formula lines for correct rendering |
||
| (26 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
{{quiz-Header|Buchseite= | {{quiz-Header|Buchseite=Mobile_Communications/General_Description_of_Time_Variant_Systems}} | ||
[[File:P_ID2144__Mob_A_2_1.png|right|frame|Two-dimensional impulse response]] | [[File:P_ID2144__Mob_A_2_1.png|right|frame|Two-dimensional impulse response]] | ||
The two-dimensional impulse response | |||
$$h(\tau,\hspace{0.05cm}t) = \sum_{m = 1}^{M} z_m(t) \cdot {\rm \delta} (\tau - \tau_m)$$ | :$$h(\tau,\hspace{0.05cm}t) = \sum_{m = 1}^{M} z_m(t) \cdot {\rm \delta} (\tau - \tau_m)$$ | ||
is to be analyzed according to the adjoining diagram. The two axes are discrete-time: | |||
* $\tau$ | * $\tau$ is the <i>delay</i> and can take values between $0$ and $6 \ {\rm µ s}$ in the example. | ||
* The | * The (absolute) time $t$ is related to the frequency of snapshots and characterizes the variation of the channel over time. We have $t = n \cdot T$, where $T \gg \tau_{\rm max}$ . | ||
The arrows in the graphic mark different Dirac functions with | The arrows in the graphic mark different Dirac functions with weights $1$ (red), $1/2$ (blue) and $1/4$ (green). This means that the delay $\tau$ is also discrete here. | ||
When measuring the impulse responses at different times $t$ at second | When measuring the impulse responses at different times $t$ at intervals of one second, the resolution of the $\tau$–axis was two microseconds $(\delta \tau = 2 \ \rm µ s)$. The echoes were not localized more precisely. | ||
In this task the following quantities are also referred to: | In this task the following quantities are also referred to: | ||
* the | * the "time-variant transfer function" according to the definition | ||
:$$H(f,\hspace{0.05cm} t) | :$$H(f,\hspace{0.05cm} t)\hspace{0.2cm} \stackrel {f,\hspace{0.05cm}\tau}{\bullet\!\!-\!\!\!-\!\!\!-\!\!\circ} \hspace{0.2cm} h(\tau,\hspace{0.05cm}t)\hspace{0.05cm},$$ | ||
* the approximation of the | * the approximation of the "coherence bandwidth" as the reciprocal of the maximal duration of the delay profile $h(\tau, t)$: | ||
:$$B_{\rm K} \hspace{0.01cm}' = \frac{1}{\ | :$$B_{\rm K} \hspace{0.01cm}' = \frac{1}{\tau_{\rm max} - \tau_{\rm min}}\hspace{0.05cm}.$$ | ||
| Line 31: | Line 28: | ||
''Notes:'' | ''Notes:'' | ||
* | * This task belongs to the chapter [[Mobile_Communications/General_Description_of_Time_Variant_Systems|General description of time–variant systems]]. | ||
* More detailed information on various definitions for the coherence bandwidth can be found in chapter [[Mobile_Communications/ | * More detailed information on various definitions for the coherence bandwidth can be found in chapter [[Mobile_Communications/The_GWSSUS_Channel_Model|The GWSSUS channel model]], especially in the sample solution for the [[Aufgaben:Exercise_2.7Z:_Coherence_Bandwidth_of_the_LTI_Two-Path_Channel|Exercise 2.7Z]]. | ||
* It should be noted that this is a constructed task. According to the above | * It should be noted that this is a constructed task. According to the above graph, the 2D impulse response changes significantly during the time span $T$. Therefore $T$ is to be interpreted here as very large, for example one hour. | ||
*In mobile radio, $h(\tau, t)$ changes in the millisecond range taking into account the Doppler effect, but the changes during this time are rather moderate. | *In mobile radio, $h(\tau, t)$ changes in the millisecond range taking into account the Doppler effect, but the changes during this time are rather moderate. | ||
| Line 39: | Line 36: | ||
===Questionnaire== | ===Questionnaire=== | ||
<quiz display=simple> | <quiz display=simple> | ||
{What restriction does the specification $\Delta \tau = 2 \rm µ s$ | {What restriction does the specification $\Delta \tau = 2 \rm µ s$ impose on the maximum bandwidth $B_{\rm max}$ of the signal to be examined? | ||
|type="{}"} | |type="{}"} | ||
$B_{\rm max} \ = \ ${ 500 3% } $\ \ \rm kHz$ | $B_{\rm max} \ = \ ${ 500 3% } $\ \ \rm kHz$ | ||
{At what time $t_2$ | {At what time $t_2$ the channel is ideal, characterized by $H(f, t_{\rm 2}) = 1$? | ||
|type="{}"} | |type="{}"} | ||
$t_{\rm 2} \ = \ ${ 0. } $\ \cdot T$ | $t_{\rm 2} \ = \ ${ 0. } $\ \cdot T$ | ||
{From what time $t_{\rm 3}$ | {From what time $t_{\rm 3}$ this channel does cause distortion? | ||
|type="{}"} | |type="{}"} | ||
$t_{\rm 3} \ = \ ${ 3 3% } $\ \cdot T$ | $t_{\rm 3} \ = \ ${ 3 3% } $\ \cdot T$ | ||
| Line 59: | Line 56: | ||
$t = 5T \text{:} \hspace{0.4cm} B_{\rm K} \hspace{0.01cm}' \ = \ ${ 166.7 3% } $\ \ \rm kHz$ | $t = 5T \text{:} \hspace{0.4cm} B_{\rm K} \hspace{0.01cm}' \ = \ ${ 166.7 3% } $\ \ \rm kHz$ | ||
{From what time $t_{\rm 5}$ | {From what time $t_{\rm 5}$ this channel could be considered as time–invariant? | ||
|type="{}"} | |type="{}"} | ||
$t_{\rm 5} \ = \ ${ 5 3% } $\ \cdot T$ | $t_{\rm 5} \ = \ ${ 5 3% } $\ \cdot T$ | ||
{For which of the mentioned $T$& | {For which of the mentioned values of $T$ does it make sense to work with the $\rm 2D$–impulse response? | ||
|type="[]"} | |type="[]"} | ||
- A (slow) channel change occurs approximately after $T = 1 \ \rm µ s$. | - A (slow) channel change occurs approximately after $T = 1 \ \rm µ s$. | ||
| Line 69: | Line 66: | ||
</quiz> | </quiz> | ||
=== | ===Solution=== | ||
{{ML-Kopf}} | |||
'''(1)''' The | '''(1)''' The signal described in the equivalent low-pass range should not have a bandwidth greater than $B_{\rm max} = 1/\Delta \tau \ \underline {= 500 \ \rm kHz}$. | ||
*This mathematical (two-sided) bandwidth of the low pass | *This mathematical (two-sided) bandwidth of the low-pass signal is also the maximum physical (one-sided) bandwidth of the corresponding band-pass signal. | ||
'''(2)''' $H(f, t_{\rm 2}) = 1$ means in the time domain $h(\tau, t_{\rm 2}) = \delta(\tau)$. | |||
'''(2)''' $H(f, t_{\rm 2}) = 1$ means in the time domain $h(\tau, t_{\rm 2}) = \delta(\tau)$. | |||
*Only then the channel is ideal. | *Only then the channel is ideal. | ||
*You can see from the | *You can see from the graph that this only applies to the time $t_{\rm 2} \ \underline {= 0}$. | ||
'''(3)''' Distortions occur if at time $t$ the impulse response is composed of two or more Dirac functions ⇒ $t ≥ t_{\rm 3} \ \underline {= 3T}$. | |||
*At time $t = T$ the signal $s(t)$ is delayed only by $2 \ \rm µ s$. | |||
*At $t = 2T$ the amplitude is additionally reduced by $50 \%$ $(6 \ \ \rm dB$ loss$)$. | |||
* | '''(4)''' At time $t = 3T$ the two Dirac functions occur at $\tau_{\rm min} = 0$ and $\tau_{\rm max} = 4 \ \rm µ s$. | ||
*At $t = 5T$ the impulse response has | *The (simple approximation for the) coherence bandwidth is the reciprocal of the delay span of these Dirac functions: | ||
:$$B_{\rm K}\hspace{0.01cm}' = \frac{1}{4\,\,{\rm µ s} } \hspace{0.25cm} \underline{ = 250\,\,{\rm kHz}}\hspace{0.05cm}.$$ | |||
*The same as at $t = 4T$ the time between the Dirac functions is $4 \ \rm µ s$: $B_{\rm K} \hspace{0.01cm}' = \underline {250 \ \rm kHz}$. | |||
*At $t = 5T$ the impulse response has a duration of $6 \ \ \rm µ s \ \ \Rightarrow \ {\it B}_{\rm K} \hspace{0.01cm}' \ \underline {\approx 166.7 \ \rm kHz}$. | |||
'''(5)''' The impulse responses are identical at the times $5T$, $6T$ and $7T$ | '''(5)''' The impulse responses are identical at the times $5T$, $6T$ and $7T$ each consists of three Diracs. | ||
* Assuming that nothing changes in this respect for $t ≥ 8T$ | * Assuming that nothing changes in this respect for $t ≥ 8T$: $t_{\rm 5} \ \ \underline {= 5T}$. | ||
'''(6)''' | '''(6)''' <u>Solution 2</u> is correct: | ||
*The temporal change of the impulse response, whose dynamics is expressed by the parameter $T$, must be slow in comparison to the maximum | *The temporal change of the impulse response, whose dynamics is expressed by the parameter $T$, must be slow in comparison to the maximum delay span of $h(\tau, t)$, which is in this task equals $\tau_{\rm max} = 6 \ \rm µ s$ ⇒ $T \gg \tau_{\rm max}.$ | ||
{{ML-Fuß}} | {{ML-Fuß}} | ||
[[Category: | [[Category:Mobile Communications: Exercises|^2.1 Description of Time-Variant Systems^]] | ||
[[de:Exercises:Exercise_2.1:_Two-Dimensional_Impulse_Response]] | |||
Latest revision as of 15:30, 16 March 2026

The two-dimensional impulse response
- $$h(\tau,\hspace{0.05cm}t) = \sum_{m = 1}^{M} z_m(t) \cdot {\rm \delta} (\tau - \tau_m)$$
is to be analyzed according to the adjoining diagram. The two axes are discrete-time:
- $\tau$ is the delay and can take values between $0$ and $6 \ {\rm µ s}$ in the example.
- The (absolute) time $t$ is related to the frequency of snapshots and characterizes the variation of the channel over time. We have $t = n \cdot T$, where $T \gg \tau_{\rm max}$ .
The arrows in the graphic mark different Dirac functions with weights $1$ (red), $1/2$ (blue) and $1/4$ (green). This means that the delay $\tau$ is also discrete here.
When measuring the impulse responses at different times $t$ at intervals of one second, the resolution of the $\tau$–axis was two microseconds $(\delta \tau = 2 \ \rm µ s)$. The echoes were not localized more precisely.
In this task the following quantities are also referred to:
- the "time-variant transfer function" according to the definition
- $$H(f,\hspace{0.05cm} t)\hspace{0.2cm} \stackrel {f,\hspace{0.05cm}\tau}{\bullet\!\!-\!\!\!-\!\!\!-\!\!\circ} \hspace{0.2cm} h(\tau,\hspace{0.05cm}t)\hspace{0.05cm},$$
- the approximation of the "coherence bandwidth" as the reciprocal of the maximal duration of the delay profile $h(\tau, t)$:
- $$B_{\rm K} \hspace{0.01cm}' = \frac{1}{\tau_{\rm max} - \tau_{\rm min}}\hspace{0.05cm}.$$
Notes:
- This task belongs to the chapter General description of time–variant systems.
- More detailed information on various definitions for the coherence bandwidth can be found in chapter The GWSSUS channel model, especially in the sample solution for the Exercise 2.7Z.
- It should be noted that this is a constructed task. According to the above graph, the 2D impulse response changes significantly during the time span $T$. Therefore $T$ is to be interpreted here as very large, for example one hour.
- In mobile radio, $h(\tau, t)$ changes in the millisecond range taking into account the Doppler effect, but the changes during this time are rather moderate.
Questionnaire
Solution
- This mathematical (two-sided) bandwidth of the low-pass signal is also the maximum physical (one-sided) bandwidth of the corresponding band-pass signal.
(2) $H(f, t_{\rm 2}) = 1$ means in the time domain $h(\tau, t_{\rm 2}) = \delta(\tau)$.
- Only then the channel is ideal.
- You can see from the graph that this only applies to the time $t_{\rm 2} \ \underline {= 0}$.
(3) Distortions occur if at time $t$ the impulse response is composed of two or more Dirac functions ⇒ $t ≥ t_{\rm 3} \ \underline {= 3T}$.
- At time $t = T$ the signal $s(t)$ is delayed only by $2 \ \rm µ s$.
- At $t = 2T$ the amplitude is additionally reduced by $50 \%$ $(6 \ \ \rm dB$ loss$)$.
(4) At time $t = 3T$ the two Dirac functions occur at $\tau_{\rm min} = 0$ and $\tau_{\rm max} = 4 \ \rm µ s$.
- The (simple approximation for the) coherence bandwidth is the reciprocal of the delay span of these Dirac functions:
- $$B_{\rm K}\hspace{0.01cm}' = \frac{1}{4\,\,{\rm µ s} } \hspace{0.25cm} \underline{ = 250\,\,{\rm kHz}}\hspace{0.05cm}.$$
- The same as at $t = 4T$ the time between the Dirac functions is $4 \ \rm µ s$: $B_{\rm K} \hspace{0.01cm}' = \underline {250 \ \rm kHz}$.
- At $t = 5T$ the impulse response has a duration of $6 \ \ \rm µ s \ \ \Rightarrow \ {\it B}_{\rm K} \hspace{0.01cm}' \ \underline {\approx 166.7 \ \rm kHz}$.
(5) The impulse responses are identical at the times $5T$, $6T$ and $7T$ each consists of three Diracs.
- Assuming that nothing changes in this respect for $t ≥ 8T$: $t_{\rm 5} \ \ \underline {= 5T}$.
(6) Solution 2 is correct:
- The temporal change of the impulse response, whose dynamics is expressed by the parameter $T$, must be slow in comparison to the maximum delay span of $h(\tau, t)$, which is in this task equals $\tau_{\rm max} = 6 \ \rm µ s$ ⇒ $T \gg \tau_{\rm max}.$