Aufgaben:Exercise 2.2Z: Non-Linearities: Difference between revisions
From LNTwww
m Guenter moved page Aufgaben:Exercise 2.2Z: Nonlinearities to Aufgaben:Exercise 2.2Z: Non-Linearities |
Fix interlanguage link: resolve redirect chain |
||
| (5 intermediate revisions by 2 users not shown) | |||
| Line 6: | Line 6: | ||
We start from the triangular signal ${x(t)}$ according to the figure above. | We start from the triangular signal ${x(t)}$ according to the figure above. | ||
If we apply this signal to an amplitude limiter, we get the signal | *If we apply this signal to an amplitude limiter, we get the signal | ||
:$$y(t)=\left\{ {x(t)\atop \rm 1V}{\hspace{0.5cm} {\rm for}\quad x(t)\le \rm 1V \atop {\rm else}}\right..$$ | :$$y(t)=\left\{ {x(t)\atop \rm 1V}{\hspace{0.5cm} {\rm for}\quad x(t)\le \rm 1V \atop {\rm else}}\right..$$ | ||
*Another non-linearity provides the signal | |||
:$$z(t)=x^2(t).$$ | :$$z(t)=x^2(t).$$ | ||
The DC signal components are designated $x_0$, $y_0$ and $z_0$ in the following. | The DC signal components are designated $x_0$, $y_0$ and $z_0$ in the following. | ||
| Line 20: | Line 18: | ||
''Hint:'' | ''Hint:'' | ||
*This | *This task belongs to chapter [[Signal_Representation/Direct_Current_Signal_-_Limit_Case_of_a_Periodic_Signal|Direct Current Signal - Limit Case of a Periodic Signal]]. | ||
| Line 50: | Line 45: | ||
===Solution=== | ===Solution=== | ||
{{ML-Kopf}} | {{ML-Kopf}} | ||
'''(1)''' The DC signal $x_0$ is the mean | '''(1)''' The DC signal $x_0$ is the mean of signal ${x(t)}$. Averaging over a period duration $T_0 = 1 \, \text{ms}$ is sufficient. One obtains: | ||
:$$x_0=\frac{1}{T_0}\int^{T_0}_0 x(t)\,{\rm d} t \hspace{0.15cm}\underline{=1\,\rm V}.$$ | :$$x_0=\frac{1}{T_0}\int^{T_0}_0 x(t)\,{\rm d} t \hspace{0.15cm}\underline{=1\,\rm V}.$$ | ||
'''(2)''' In half the time ${y(t)} = 1\, \text{V}$, in the other half is is between $0$ and $1\, \text{V}$ with the mean | '''(2)''' In half the time ${y(t)} = 1\, \text{V}$, in the other half is is between $0$ and $1\, \text{V}$ with the mean at $0.5 \,\text{V}$ ⇒ $y_0 \hspace{0.15cm}\underline{= 0.75 \,\text{V}}$. | ||
'''(3)''' Due to the periodicity and symmetry, averaging in the range from $0$ bis $T_0/2$ is sufficient. | '''(3)''' Due to the periodicity and symmetry, averaging in the range from $0$ bis $T_0/2$ is sufficient. | ||
* With the corresponding characteristic curve, the following then applies | * With the corresponding characteristic curve, the following then applies: | ||
:$$z_0=\frac{1}{T_0/2}\int^{T_0/2}_0 x^2(t)\,{\rm d}t=\frac{4\rm V^2}{T_0/2}\int^{T_0/2}_0 ({2t}/{T_0})^2\, {\rm d}t={4}/{3}\rm \;V^2 | :$$z_0=\frac{1}{T_0/2}\int^{T_0/2}_0 x^2(t)\,{\rm d}t=\frac{4\rm V^2}{T_0/2}\int^{T_0/2}_0 ({2t}/{T_0})^2\, {\rm d}t={4}/{3}\rm \;V^2\hspace{0.15cm}\underline{\approx1.333\rm \;V^2}.$$ | ||
\hspace{0.15cm}\underline{\approx1.333\rm \;V^2}.$$ | |||
{{ML-Fuß}} | {{ML-Fuß}} | ||
| Line 68: | Line 62: | ||
[[Category:Signal Representation: Exercises|^2.2 Direct Current Signal^]] | [[Category:Signal Representation: Exercises|^2.2 Direct Current Signal^]] | ||
[[de:Aufgaben:Aufgabe 2.2Z: Nichtlinearitäten]] | |||
Latest revision as of 17:53, 16 March 2026
We start from the triangular signal ${x(t)}$ according to the figure above.
- If we apply this signal to an amplitude limiter, we get the signal
- $$y(t)=\left\{ {x(t)\atop \rm 1V}{\hspace{0.5cm} {\rm for}\quad x(t)\le \rm 1V \atop {\rm else}}\right..$$
- Another non-linearity provides the signal
- $$z(t)=x^2(t).$$
The DC signal components are designated $x_0$, $y_0$ and $z_0$ in the following.
Hint:
- This task belongs to chapter Direct Current Signal - Limit Case of a Periodic Signal.
Questions
Solution
(1) The DC signal $x_0$ is the mean of signal ${x(t)}$. Averaging over a period duration $T_0 = 1 \, \text{ms}$ is sufficient. One obtains:
- $$x_0=\frac{1}{T_0}\int^{T_0}_0 x(t)\,{\rm d} t \hspace{0.15cm}\underline{=1\,\rm V}.$$
(2) In half the time ${y(t)} = 1\, \text{V}$, in the other half is is between $0$ and $1\, \text{V}$ with the mean at $0.5 \,\text{V}$ ⇒ $y_0 \hspace{0.15cm}\underline{= 0.75 \,\text{V}}$.
(3) Due to the periodicity and symmetry, averaging in the range from $0$ bis $T_0/2$ is sufficient.
- With the corresponding characteristic curve, the following then applies:
- $$z_0=\frac{1}{T_0/2}\int^{T_0/2}_0 x^2(t)\,{\rm d}t=\frac{4\rm V^2}{T_0/2}\int^{T_0/2}_0 ({2t}/{T_0})^2\, {\rm d}t={4}/{3}\rm \;V^2\hspace{0.15cm}\underline{\approx1.333\rm \;V^2}.$$
