Aufgaben:Exercise 2.3: Cosine and Sine Components: Difference between revisions

From LNTwww
Mwiki-lnt (talk | contribs)
m Textersetzung - „*Sollte die Eingabe des Zahlenwertes „0” erforderlich sein, so geben Sie bitte „0.” ein.“ durch „ “
Fix interlanguage link: resolve redirect chain
 
(19 intermediate revisions by 5 users not shown)
Line 3: Line 3:
}}
}}


[[File: P_ID278_Sig_A_2_3neu.png|right|frame|Spektrum von Cosinus- und Sinusanteilen]]
[[File: P_ID278_Sig_A_2_3neu.png|right|frame|Spectra of DC, cosine and sine components]]


Gegeben ist das Amplitudenspektrum $X(f)$ eines Signals $x(t)$ entsprechend der Grafik.
Given is the amplitude spectrum  $X(f)$  of a signal  $x(t)$  according to the graph.
Die Normierungsfrequenz sei $f_1 = 4\,\text{kHz}$ . Damit liegen die tatsächlichen Frequenzen der Signalanteile bei $0\,\text{kHz}$, $4\,\text{kHz}$ und $10\,\text{kHz}$ .
*Let  $f_1 = 4\,\text{kHz}$ be the normalisation frequency.  
*Thus the frequencies of the signal components are  $0\,\text{kHz}$,  $4\,\text{kHz}$  and  $10\,\text{kHz}$.


Dieses Signal $x(t)$ liegt am Eingang eines linearen Differenzierers, dessen Ausgang mit $\omega_1 = 2\pi f_1$ wie folgt dargestellt werden kann:


:$$y(t)=\frac{1}{\omega_1}\cdot\frac{\rm d \it x(t)}{\rm d \it t}.$$
This signal  $x(t)$   is at the input of a linear differentiator whose output can be represented with  $\omega_1 = 2\pi f_1$  as follows:


:$$y(t)=\frac{1}{\omega_1}\cdot\frac{ {\rm d}  x(t)}{{\rm d}  t}.$$






''Hinweise:''  
 
*Die Aufgabe gehört zum Kapitel [[Signaldarstellung/Harmonische_Schwingung|Harmonische Schwingung]].
 
 
 
''Hint:''  
*This exercise belongs to the chapter  [[ Signal_Representation/Harmonic_Oscillation|Harmonic Oscillation]].
   
   


   
   


===Fragebogen===
===Questions===


<quiz display=simple>
<quiz display=simple>


{Geben Sie $x(t)$ analytisch an. Wie groß ist der Signalwert bei $t = 0$?
{Give&nbsp; $x(t)$&nbsp; analytically.&nbsp; What is the signal value at&nbsp; $t = 0$?
|type="{}"}
|type="{}"}
$x(t=0)\ = \ $ { 1 3% } &nbsp; ${\rm V}$
$x(t=0)\ = \ $ { 1 3% } &nbsp; ${\rm V}$


{Wie groß ist die Periodendauer des Signals $x(t)$?
{What is the period duration of the signal&nbsp; $x(t)$?
|type="{}"}
|type="{}"}
$T_0\ = \ $ { 0.5 3% } &nbsp; ${\rm ms}$
$T_0\ = \ $ { 0.5 3% } &nbsp; ${\rm ms}$


{Berechnen Sie das Ausgangssignal $y(t)$ des Differenzierers. Wie groß ist der Signalwert zum Zeitpunkt $t = 0$?
{Calculate the output signal&nbsp; $y(t)$&nbsp; of the differentiator.&nbsp; What is the signal value at time&nbsp; $t = 0$?
|type="{}"}
|type="{}"}
$y(t=0)\ = \ $ { 10 3% } &nbsp; ${\rm V}$
$y(t=0)\ = \ $ { 10 3% } &nbsp; ${\rm V}$


{Welche der folgenden Aussagen sind bezüglich des Signals $y(t)$ bzw. seines Spektrums $Y(f)$ zutreffend?
{Which of the following statements are true regarding the signal&nbsp; $y(t)$&nbsp; or its spectrum&nbsp; $Y(f)$&nbsp;?
|type="[]"}
|type="[]"}
+ $y(t)$ hat die gleiche Periodendauer wie das Signal $x(t)$.
+ $y(t)$&nbsp; has the same period duration as the signal&nbsp; $x(t)$.
- $Y(f)$ beinhaltet eine Diracfunktion bei der Frequenz $f = 0$.
- $Y(f)$&nbsp; contains a Dirac function at the frequency&nbsp; $f = 0$.
- $Y(f)$ beinhaltet eine Diracfunktion bei $f_1$ mit Gewicht $\rm{j} · 1\,{\rm V}$.
- $Y(f)$&nbsp; contains a Dirac function at&nbsp; $+f_1$&nbsp; with weight&nbsp; $\rm{j} · 1\,{\rm V}$.
+ $Y(f)$ beinhaltet eine Diracfunktion bei $–\hspace{-0.1cm}2.5 \cdot f_1$ mit Gewicht $5\,{\rm V}$.
+ $Y(f)$&nbsp; contains a Dirac function at&nbsp; $–\hspace{-0.1cm}2.5 \cdot f_1$&nbsp; with weight&nbsp; $5\,{\rm V}$.




</quiz>
</quiz>


===Musterlösung===
===Solution===
{{ML-Kopf}}
{{ML-Kopf}}
'''(1)'''&nbsp; Das Zeitsignal hat die folgende Form:
'''(1)'''&nbsp; The time signal has the following form:
   
   
:$$x(t)={\rm 3V}-{\rm 2V}\cdot \cos(\omega_{\rm 1} \cdot t)+{\rm 4V} \cdot \sin(2.5 \cdot \omega_{\rm 1} \cdot t).$$
:$$x(t)={\rm 3V}-{\rm 2V}\cdot \cos(\omega_{\rm 1} \cdot t)+{\rm 4V} \cdot \sin(2.5 \cdot \omega_{\rm 1} \cdot t).$$


Hierbei bezeichnet $\omega_1 = 2\pi f_1$ die Kreisfrequenz des Cosinusanteils. Zum Zeitpunkt $t = 0$ hat das Signal den Wert $\underline{1\,\rm V}$.
[[File:P_ID293__Sig_A_2_3_a.png|right|frame|Sum signal of DC, cosine and sine components]]


[[File:P_ID293__Sig_A_2_3_a.png|frame|Summensignal aus Cosinus- und Sinusanteilen]]
*Here&nbsp; $\omega_1 = 2\pi f_1$&nbsp; denotes the circular frequency of the cosine component.
*At time&nbsp; $t = 0$&nbsp; the signal has the value&nbsp; $x(t=0)\hspace{0.15 cm}\underline{=1\,\rm V}$.




'''(2)'''&nbsp; Die Grundfrequenz $f_0$ ist der kleinste gemeinsame Teiler
'''(2)'''&nbsp; The basic frequency&nbsp; $f_0$&nbsp; is the greatest common divisor
*von $f_1 = 4{\,\rm kHz}$   
*of $f_1 = 4{\,\rm kHz}$   
*und $2.5 · f_1 = 10{\,\rm kHz}$ $2.5 · f_1$.  
*and $2.5 · f_1 = 10{\,\rm kHz}$.  




Daraus folgt $f_1 = 4{\,\rm kHz}$ &nbsp;&rArr;&nbsp;  Periodendauer $T_0 = 1/f_0 \hspace{0.1cm}\underline{= 0.5 {\,\rm ms}}$.
From this follows&nbsp; $f_0 = 2{\,\rm kHz}$ &nbsp; &rArr; &nbsp;  period duration $T_0 = 1/f_0 \hspace{0.1cm}\underline{= 0.5 {\,\rm ms}}$.
<br clear=all>
<br clear=all>
[[File:P_ID294__Sig_A_2_3_d_neu.png|right|300px|frame|Spektrum mit diskreten Anteilen]]
'''(3)'''&nbsp; The following applies to the output signal $y(t)$ of the differentiatior:
'''(3)'''&nbsp; Für das Ausgangssignal $y(t)$ des Differenzierers gilt:


:$$y(t)=\frac{1}{\omega_1}\cdot\frac{ {\rm d}x(t)}{{\rm d}t}=\frac{ {\rm -2V}}{\omega_1}\cdot\omega_1 \cdot (-\sin(\omega_1 t))+\frac{\rm 4V}{\omega_1}\cdot 2.5\omega_1\cdot {\rm cos}(2.5\omega_1t).$$
:$$y(t)=\frac{1}{\omega_1}\cdot\frac{ {\rm d}x(t)}{{\rm d}t}=\frac{ {\rm -2V}}{\omega_1}\cdot\omega_1 \cdot (-\sin(\omega_1 t))+\frac{\rm 4V}{\omega_1}\cdot 2.5\omega_1\cdot {\rm cos}(2.5\omega_1t).$$
[[File:P_ID294__Sig_A_2_3_d_neu.png|right|300px|frame|Spectrum with discrete components]]
   
   
Dies führt zum Ergebnis:
*This leads to the solution:


:$$y(t)={\rm 2V}\cdot\sin(\omega_1 t)+{\rm 10V}\cdot\cos(2.5\omega_1 t).$$
:$$y(t)={\rm 2V}\cdot\sin(\omega_1 t)+{\rm 10V}\cdot\cos(2.5\omega_1 t).$$
   
   
Für $t = 0$ ergibt sich der Wert $y(t=0)\hspace{0.15cm}\underline{=10\,\rm V}$.  
*For&nbsp; $t = 0$&nbsp; the value&nbsp; $y(t=0)\hspace{0.15cm}\underline{=10\,\rm V}$ follows.  
Rechts ist das Spektrum $Y(f)$ dargestellt.  
*The spectrum&nbsp; $Y(f)$&nbsp; is shown on the right.  
 




'''(4)'''&nbsp; Richtig sind die <u>Lösungsvorschläge 1 und 4</u>:
'''(4)'''&nbsp; The <u>solutions 1 and 4</u> are correct:
*Die Periodendauer $T_0$ wird durch die Amplitude und die Phase der beiden Anteile nicht verändert. Das bedeutet, dass weiterhin $T_0 = 0.5 {\,\rm ms}$  gilt.  
*The period duration $T_0$ is not changed by the amplitude and phase of the two components.  
*Der Gleichanteil verschwindet aufgrund der Differentiation.  
*This means, that&nbsp; $T_0 = 0.5 {\,\rm ms}$&nbsp; still applies.  
*Der Anteil bei $f_1$ ist sinusförmig. Somit hat $X(f)$ einen (imaginären) Dirac bei $f = f_1$, jedoch mit negativem Vorzeichen.  
*The DC component disappears due to the differentiation.  
*Der Cosinusanteil mit der Amplitude ${10\,\rm V}$ hat die beiden Diracfunktionen bei $\pm 2.5 \cdot f_1$ zur Folge, jeweils mit dem Gewicht ${5\,\rm V}$ .  
*The component&nbsp; $f_1$&nbsp; is sinusoidal. Thus&nbsp; $X(f)$&nbsp; has an (imaginary) Dirac at&nbsp; $f = f_1$, but with a negative sign.  
*The cosine component with amplitude&nbsp; ${10\,\rm V}$&nbsp; results in the two Dirac functions at&nbsp; $\pm 2.5 \cdot f_1$&nbsp;, each with weight&nbsp; ${5\,\rm V}$ .  
{{ML-Fuß}}
{{ML-Fuß}}


__NOEDITSECTION__
__NOEDITSECTION__
[[Category:Aufgaben zu Signaldarstellung|^2. Periodische Signale^]]
[[Category:Signal Representation: Exercises|^2.3 Harmonic Oscillation^]]
[[de:Aufgaben:Aufgabe 2.3: cos- und sin-Anteil]]

Latest revision as of 17:53, 16 March 2026

Spectra of DC, cosine and sine components

Given is the amplitude spectrum  $X(f)$  of a signal  $x(t)$  according to the graph.

  • Let  $f_1 = 4\,\text{kHz}$ be the normalisation frequency.
  • Thus the frequencies of the signal components are  $0\,\text{kHz}$,  $4\,\text{kHz}$  and  $10\,\text{kHz}$.


This signal  $x(t)$  is at the input of a linear differentiator whose output can be represented with  $\omega_1 = 2\pi f_1$  as follows:

$$y(t)=\frac{1}{\omega_1}\cdot\frac{ {\rm d} x(t)}{{\rm d} t}.$$




Hint:




Questions

1 Give  $x(t)$  analytically.  What is the signal value at  $t = 0$?

$x(t=0)\ = \ $   ${\rm V}$

2 What is the period duration of the signal  $x(t)$?

$T_0\ = \ $   ${\rm ms}$

3 Calculate the output signal  $y(t)$  of the differentiator.  What is the signal value at time  $t = 0$?

$y(t=0)\ = \ $   ${\rm V}$

4 Which of the following statements are true regarding the signal  $y(t)$  or its spectrum  $Y(f)$ ?

$y(t)$  has the same period duration as the signal  $x(t)$.
$Y(f)$  contains a Dirac function at the frequency  $f = 0$.
$Y(f)$  contains a Dirac function at  $+f_1$  with weight  $\rm{j} · 1\,{\rm V}$.
$Y(f)$  contains a Dirac function at  $–\hspace{-0.1cm}2.5 \cdot f_1$  with weight  $5\,{\rm V}$.


Solution

(1)  The time signal has the following form:

$$x(t)={\rm 3V}-{\rm 2V}\cdot \cos(\omega_{\rm 1} \cdot t)+{\rm 4V} \cdot \sin(2.5 \cdot \omega_{\rm 1} \cdot t).$$
Sum signal of DC, cosine and sine components
  • Here  $\omega_1 = 2\pi f_1$  denotes the circular frequency of the cosine component.
  • At time  $t = 0$  the signal has the value  $x(t=0)\hspace{0.15 cm}\underline{=1\,\rm V}$.


(2)  The basic frequency  $f_0$  is the greatest common divisor

  • of $f_1 = 4{\,\rm kHz}$
  • and $2.5 · f_1 = 10{\,\rm kHz}$.


From this follows  $f_0 = 2{\,\rm kHz}$   ⇒   period duration $T_0 = 1/f_0 \hspace{0.1cm}\underline{= 0.5 {\,\rm ms}}$.
(3)  The following applies to the output signal $y(t)$ of the differentiatior:

$$y(t)=\frac{1}{\omega_1}\cdot\frac{ {\rm d}x(t)}{{\rm d}t}=\frac{ {\rm -2V}}{\omega_1}\cdot\omega_1 \cdot (-\sin(\omega_1 t))+\frac{\rm 4V}{\omega_1}\cdot 2.5\omega_1\cdot {\rm cos}(2.5\omega_1t).$$
Spectrum with discrete components
  • This leads to the solution:
$$y(t)={\rm 2V}\cdot\sin(\omega_1 t)+{\rm 10V}\cdot\cos(2.5\omega_1 t).$$
  • For  $t = 0$  the value  $y(t=0)\hspace{0.15cm}\underline{=10\,\rm V}$ follows.
  • The spectrum  $Y(f)$  is shown on the right.


(4)  The solutions 1 and 4 are correct:

  • The period duration $T_0$ is not changed by the amplitude and phase of the two components.
  • This means, that  $T_0 = 0.5 {\,\rm ms}$  still applies.
  • The DC component disappears due to the differentiation.
  • The component  $f_1$  is sinusoidal. Thus  $X(f)$  has an (imaginary) Dirac at  $f = f_1$, but with a negative sign.
  • The cosine component with amplitude  ${10\,\rm V}$  results in the two Dirac functions at  $\pm 2.5 \cdot f_1$ , each with weight  ${5\,\rm V}$ .