Aufgaben:Exercise 1.7: System Efficiencies: Difference between revisions

From LNTwww
No edit summary
Fix interlanguage link: resolve redirect chain
 
(14 intermediate revisions by 4 users not shown)
Line 1: Line 1:


{{quiz-Header|Buchseite=Digitalsignalübertragung/Optimierung der Basisbandübertragungssysteme
{{quiz-Header|Buchseite=Digital_Signal_Transmission/Optimization_of_Baseband_Transmission_Systems
}}
}}




[[File:P_ID1294__Dig_A_1_7.png|right|frame|Sendegrundimpuls „Trapez” ]]
[[File:P_ID1294__Dig_A_1_7.png|right|frame|Transmission pulse  "Trapezoid" ]]
Der Empfänger eines binären Nachrichtenübertragungssystems mit Symboldauer  $T$  besteht aus einem Integrator, der durch die Impulsantwort
The receiver of a binary transmission system with symbol duration  $T$  consists of an integrator,  which is represented by the impulse response
:$$h_{\rm E}(t)  =  \left\{ \begin{array}{c} 1/T  \\
:$$h_{\rm E}(t)  =  \left\{ \begin{array}{c} 1/T  \\0 \\  \end{array} \right.\quad\begin{array}{*{1}c} {\rm{for}}\\  {\rm{for}} \\ \end{array}\begin{array}{*{20}c}\hspace{0.05cm}|t| < T/2 \hspace{0.05cm}, \\|t| > T/2\hspace{0.05cm}. \\\end{array}$$
0 \\  \end{array} \right.\quad
This is followed by a threshold decision with optimal parameters.
\begin{array}{*{1}c} {\rm{f\ddot{u}r}}
\\  {\rm{f\ddot{u}r}} \\ \end{array}\begin{array}{*{20}c}
\hspace{0.05cm}|t| < T/2 \hspace{0.05cm}, \\
|t| > T/2 \\
\end{array}$$
beschreibbar ist. Danach folgt ein Schwellenwertentscheider mit optimalen Parametern.


Der Sendegrundimpuls &nbsp;$g_{s}(t)$&nbsp; gemäß der Grafik ist im Allgemeinen trapezförmig und wird durch die Zeit &nbsp;$T_{1}$&nbsp; parametrisiert:
The basic transmission pulse &nbsp;$g_{s}(t)$&nbsp; according to the diagram is generally trapezoidal and is parameterized by the time &nbsp;$T_{1}$:&nbsp;  
*Für &nbsp;$T_{1} = 0$&nbsp; ergibt sich ein Dreieckimpuls, für &nbsp;$T_{1} = T$&nbsp; das NRZ–Rechteck.  
*For &nbsp;$T_{1} = 0$&nbsp; the result is a triangular pulse,&nbsp; for &nbsp;$T_{1} = T$&nbsp; the NRZ rectangle.
*Die absolute Impulsdauer &nbsp;$T_{\rm S}$&nbsp; ist stets gleich der Symboldauer &nbsp;$T$, also dem Abstand zweier Sendeimpulse.
*The absolute pulse duration &nbsp;$T_{\rm S}$&nbsp; is always equal to the symbol duration &nbsp;$T$,&nbsp; i.e. the spacing between two transmission pulses.




Das Signal–zu–Rausch–Leistungsverhältnis (SNR) vor dem Schwellenwertentscheider kann unter der Voraussetzung, dass keine Impulsinterferenzen auftreten, wie folgt berechnet werden:
The signal-to-noise power ratio&nbsp; $\rm (SNR)$&nbsp; before the threshold decision can be calculated as follows,&nbsp; assuming no intersymbol interfering:
:$$\rho_d = {g_0^2}/{\sigma_d^2}\hspace{0.05cm}.$$
:$$\rho_d = {g_0^2}/{\sigma_d^2}\hspace{0.05cm}.$$
Hierbei ist &nbsp;$g_{0} = g_{d}(t = 0)$&nbsp; der Maximalwert des Detektionsgrundimpulses und
Here, &nbsp;$g_{0} = g_{d}(t = 0)$&nbsp; is the maximum value of the basic transmission pulse,&nbsp; and
:$$\sigma_d^2 = {N_0}/{2} \cdot \int_{-\infty}^{+\infty}|h_{\rm E}(t)|^2 \,{\rm d} t = \frac{N_0}{2 \cdot T}$$
:$$\sigma_d^2 = {N_0}/{2} \cdot \int_{-\infty}^{+\infty}|h_{\rm E}(t)|^2 \,{\rm d} t = \frac{N_0}{2 \cdot T}$$
die Rauschleistung nach dem Empfangsfilter bei AWGN–Rauschen an seinem Eingang.
the noise power after the receiver filter in the presence of AWGN noise at its input.


Im Laufe dieser Aufgabe werden folgende Größen verwendet:
In the course of this exercise,&nbsp; the following quantities will be used:
*$\rho_{d,\rm\hspace{0.05cm} max | L}$&nbsp; ist das maximale SNR unter der Nebenbedingung der Leistungsbegrenzung.
*$\rho_{d,\rm\hspace{0.08cm} max \hspace{0.03cm}|\hspace{0.03cm} L}$&nbsp; is the maximum SNR under the constraint  of&nbsp; "power limitation".
*$\rho_{d,\rm\hspace{0.05cm} max | A}$&nbsp; ist das maximale SNR bei Spitzenwertbegrenzung (Amplitudenbegrenzung).
*$\rho_{d,\rm\hspace{0.08cm} max \hspace{0.03cm}|\hspace{0.03cm} A}$&nbsp; is the maximum SNR under the constraint of&nbsp; "peak limitation"&nbsp; (or&nbsp; "amplitude limitation").




Mit diesen Definitionen lassen sich die Systemwirkungsgrade angeben:
These definitions can be used to specify the system efficiencies:
:$$\eta_{\rm L}  = \ \frac{\rho_d}{\rho_{d, \hspace{0.05cm}{\rm max \hspace{0.05cm}|\hspace{0.05cm}
:$$\eta_{\rm L}  = \ \frac{\rho_d}{\rho_{d, \hspace{0.08cm}{\rm max \hspace{0.05cm}|\hspace{0.05cm}L}}}\hspace{0.05cm},$$
L}}}\hspace{0.05cm},$$
:$$\eta_{\rm A} = \ \frac{\rho_d}{\rho_{d, \hspace{0.08cm}{\rm max\hspace{0.05cm} |\hspace{0.05cm} A}}} = {1}/{C_{\rm S}^2}\cdot \eta_{\rm L} \hspace{0.05cm}.$$
:$$\eta_{\rm A} = \ \frac{\rho_d}{\rho_{d, \hspace{0.05cm}{\rm max\hspace{0.05cm} |
\hspace{0.05cm} A}}} = {1}/{C_{\rm S}^2}\cdot \eta_{\rm L} \hspace{0.05cm}.$$


Hierbei bezeichnet der ''Crestfaktor'' &nbsp;$C_{\rm S}$&nbsp; das Verhältnis zwischen dem Maximalwert und dem Effektivwert (Wurzel aus der Leistung) des Sendesignals &nbsp;$s(t)$.
Here,&nbsp; the&nbsp; "crest factor" &nbsp; $C_{\rm S}$&nbsp; denotes the ratio between the maximum value and the rms value&nbsp; (root of power)&nbsp; of the transmitted signal &nbsp;$s(t)$.




Line 43: Line 35:




 
Notes:  
''Hinweise:''
*The exercise belongs to the chapter&nbsp;  [[Digital_Signal_Transmission/Optimization_of_Baseband_Transmission_Systems|"Optimization of Baseband Transmission Systems"]].
*Die Aufgabe gehört zum  Kapitel&nbsp;  [[Digitalsignalübertragung/Optimierung_der_Basisbandübertragungssysteme|Optimierung der Basisbandübertragungssysteme]].
   
   
*Verwenden Sie zur Lösung der Aufgabe folgende Zahlenwerte:
*Use the following numerical values to solve the exercise:
:$$s_0^2 = 10\,{\rm mW},\hspace{0.2cm}T = 3\,{\rm{ &micro; s}}, \hspace{0.2cm}N_0 = 3 \cdot 10^{-10}\,{\rm W/Hz}\hspace{0.05cm}.$$
:$$s_0^2 = 10\,{\rm mW},\hspace{0.2cm}T = 3\,{\rm{ &micro; s}}, \hspace{0.2cm}N_0 = 3 \cdot 10^{-10}\,{\rm W/Hz}\hspace{0.05cm}.$$






===Fragebogen===
===Questions===


<quiz display=simple>
<quiz display=simple>


{Berechnen Sie die Impulsenergie &nbsp;$E_{\rm B}$&nbsp; in Abhängigkeit von &nbsp;$T_{1}$. Welche Werte ergeben sich für &nbsp;$T_{1} = 0$ , &nbsp;$T_{1} = T/2$&nbsp; und &nbsp;$T_{1} = T$?
{Calculate the pulse energy &nbsp;$E_{\rm B}$&nbsp; as a function of &nbsp;$T_{1}$.&nbsp; What are the values for &nbsp;$T_{1} = 0$,&nbsp; &nbsp;$T_{1} = T/2$&nbsp; and &nbsp;$T_{1} = T$?
|type="{}"}
|type="{}"}
$T_{1} = 0\text{:} \hspace{0.75cm}  E_{\rm B} \ = \ $ { 1 3% } $\ \cdot 10^{-8} \, \rm Ws$
$T_{1} = 0\text{:} \hspace{0.75cm}  E_{\rm B} \ = \ $ { 1 3% } $\ \cdot 10^{-8} \, \rm Ws$
Line 62: Line 53:
$T_{1} = T\text{:}\hspace{0.65cm} E_{\rm B} \ = \ $ { 3 3% } $\ \cdot 10^{-8} \, \rm Ws$
$T_{1} = T\text{:}\hspace{0.65cm} E_{\rm B} \ = \ $ { 3 3% } $\ \cdot 10^{-8} \, \rm Ws$


{Welcher Wert &nbsp;$T_{1}$&nbsp; führt bei Leistungsbegrenzung zum maximal möglichen SNR?
{What value &nbsp;$T_{1}$&nbsp; leads to the maximum possible SNR when the power is limited?
|type="{}"}
|type="{}"}
$T_{1}/T \ = \ $ { 1 3% }
$T_{1}/T \ = \ $ { 1 3% }


{Wie groß ist somit das maximale SNR bei Leistungsbegrenzung?
{Therefore,&nbsp; what is the maximum SNR with power limitation?
|type="{}"}
|type="{}"}
$\rho_{d,\hspace{0.05cm}\rm max \hspace{0.05cm}|\hspace{0.05cm} L} \ = \ $ { 200 3% }  
$\rho_{d,\hspace{0.08cm}\rm max \hspace{0.05cm}|\hspace{0.05cm} L} \ = \ $ { 200 3% }  


{Wie groß ist der Detektionsgrundimpuls &nbsp;$g_{d}(t)$&nbsp; in Impulsmitte für &nbsp;$T_{1} = T/2$?
{How large is the basic transmitter pulse &nbsp;$g_{d}(t)$&nbsp; in pulse center for &nbsp;$T_{1} = T/2$?
|type="{}"}
|type="{}"}
$g_{0} \ = \ $ { 0.075 3% } $\ \rm \sqrt{W}$
$g_{0} \ = \ $ { 0.075 3% } $\ \rm \sqrt{W}$


{Berechnen Sie den Systemwirkungsgrad &nbsp;$\eta_{\rm L}$&nbsp; bei Leistungsbegrenzung &nbsp;$(T_{1} = T/2)$.
{Calculate the system efficiency &nbsp;$\eta_{\rm L}$&nbsp; when the power is limited &nbsp;$(T_{1} = T/2)$.
|type="{}"}
|type="{}"}
$\eta_{\rm L} \ = \ $ { 0.5625 3% }  
$\eta_{\rm L} \ = \ $ { 0.5625 3% }  


{Berechnen Sie den Crestfaktor &nbsp;$(T_{1} = T/2)$.
{Calculate the crest factor &nbsp;$(T_{1} = T/2)$.
|type="{}"}
|type="{}"}
$C_{\rm S} \ = \ $ { 1.225 3% }
$C_{\rm S} \ = \ $ { 1.225 3% }


{Berechnen Sie den Systemwirkungsgrad bei Spitzenwertbegrenzung &nbsp;$(T_{1} = T/2)$.
{Calculate the system efficiency at peak limitation &nbsp;$(T_{1} = T/2)$.
|type="{}"}
|type="{}"}
$\eta_{\rm A} \ = \ $ { 0.375 3% }  
$\eta_{\rm A} \ = \ $ { 0.375 3% }  
Line 91: Line 82:
</quiz>
</quiz>


===Musterlösung===
===Solution===
{{ML-Kopf}}
{{ML-Kopf}}
'''(1)'''&nbsp; Zur Vereinfachung der Berechnungen setzen wir $T_1' = T_1/2$ und $T_2' = (T T_1)/2$.  
'''(1)'''&nbsp; To simplify the calculations,&nbsp; we set&nbsp; $T_1' = T_1/2$&nbsp; and&nbsp; $T_2' = (T - T_1)/2$.  
*Damit ergibt sich für die Sendeimpulsenergie:
*This gives for the transmitted pulse energy:
:$$E_{\rm B} =
:$$E_{\rm B} =\int_{-\infty}^{+\infty}g_s^2(t) \,{\rm d} t  =2 \cdot \int_{0}^{T_1\hspace{0.0cm}'}g_s^2(t) \,{\rm d}t\hspace{0.2cm}+ \hspace{0.2cm}2 \cdot \int_{T_1\hspace{0.0cm}'}^{T/2}g_s^2(t) \,{\rm d} t\hspace{0.05cm}.$$
\int_{-\infty}^{+\infty}g_s^2(t) \,{\rm d} t  =
*According to this division,&nbsp; it can also be written:
2 \cdot \int_{0}^{T_1\hspace{0.0cm}'}g_s^2(t) \,{\rm d}
:$${E_{\rm B}}/{2} = s_0^2 \cdot T_1\hspace{0.0cm}' + E_2\hspace{0.05cm},\hspace{0.3cm}{\rm with}\hspace{0.3cm}E_{\rm 2}  = \\int_{T_1\hspace{0.0cm}'}^{T/2}g_s^2(t) \,{\rm d} t= s_0^2 \cdot \int_{0}^{T_2\hspace{0.0cm}'}\left ( 1 - \frac {t}{T_2\hspace{0.0cm}'}\right )^2 \,{\rm d}t $$
t\hspace{0.2cm}+ \hspace{0.2cm}2 \cdot \int_{T_1\hspace{0.0cm}'}^{T/2}g_s^2(t) \,{\rm d} t
:$$\Rightarrow \hspace{0.3cm}E_{\rm 2}  = \ s_0^2 \cdot \left [ \int_{0}^{T_2\hspace{0.0cm}'}\,\,{\rm d} t- \frac {2}{T_2\hspace{0.0cm}'} \cdot\int_{0}^{T_2\hspace{0.0cm}'}t \,\,{\rm d} t + \frac {1}{(T_2\hspace{0.0cm}'\hspace{0.02cm})^2} \cdot\int_{0}^{T_2\hspace{0.0cm}'}t^2 \,\,{\rm d} t\right ] = \ s_0^2 \cdot \left [ {T_2\hspace{0.0cm}'} - \frac {2}{T_2\hspace{0.0cm}'} \cdot\frac {(T_2\hspace{0.0cm}'\hspace{0.02cm})^2}{2} + \frac {1}{(T_2\hspace{0.0cm}'\hspace{0.02cm})^2} \cdot\frac {(T_2\hspace{0.0cm}'\hspace{0.02cm})^3}{3}\right ] = s_0^2\cdot\frac {T_2\hspace{0.0cm}'\hspace{0.02cm}}{3}\hspace{0.05cm}.$$
\hspace{0.05cm}.$$
*Substituted into the above equation one obtains:
*Entsprechend dieser Aufteilung kann auch geschrieben werden:
:$${E_{\rm B}}/{2}  = s_0^2  \cdot \frac {T_1}{2}+ s_0^2  \cdot \frac {T-T_1}{2 \cdot3}= s_0^2  \cdot \left [\frac{T}{6} + \frac{T_1}{3}\right ]\hspace{0.3cm}\hspace{0.3cm}\Rightarrow E_{\rm B}  = {s_0^2}/{3}\cdot  \left (T + 2 \cdot T_1 \right )\hspace{0.05cm}.$$
:$${E_{\rm B}}/{2} = s_0^2 \cdot T_1\hspace{0.0cm}' + E_2
*With the given values&nbsp; ${s_{0}}^{2} = 10 \ \rm mW$&nbsp; and&nbsp; $T = 3\ \rm &micro; s$&nbsp; we obtain:
\hspace{0.05cm},\hspace{0.3cm}{\rm mit}\hspace{0.3cm}
:$$T_1 = 0\text{:} \hspace{0.75cm} {E_{\rm B}}  = \ 1/3 \cdot{s_0^2 \cdot T}= 1/3 \cdot {10^{-2}\,{\rm W} \cdot 3 \cdot 10^{-6}\,{\rm s}} \hspace{0.1cm}\underline {=  1 \cdot 10^{-8}\,{\rm Ws}}\hspace{0.05cm},$$
E_{\rm 2}  = \
:$$T_1 = T/2\text{:} \hspace{0.2cm} {E_{\rm B}} = \ 2/3 \cdot{ s_0^2 \cdot T}= \hspace{2.6cm}\text{...} \hspace{1.4cm}\hspace{0.1cm}\underline {=  2 \cdot 10^{-8}\,{\rm Ws}} \hspace{0.05cm},$$
  \int_{T_1\hspace{0.0cm}'}^{T/2}g_s^2(t) \,{\rm d} t
:$$T_1 = T\text{:} \hspace{0.65cm} {E_{\rm B}} = \ { s_0^2 \cdot T}= \hspace{3.65cm}\text{...} \hspace{1.4cm}\hspace{0.1cm}\underline {=  3 \cdot 10^{-8}\,{\rm Ws}} \hspace{0.05cm}.$$
= s_0^2 \cdot \int_{0}^{T_2\hspace{0.0cm}'}\left ( 1 - \frac {t}{T_2\hspace{0.0cm}'}\right )^2 \,{\rm d}
t $$  
:$$\Rightarrow \hspace{0.3cm}E_{\rm 2}  = \ s_0^2 \cdot \left [ \int_{0}^{T_2\hspace{0.0cm}'}\,\,{\rm d} t- \frac {2}{T_2\hspace{0.0cm}'} \cdot
\int_{0}^{T_2\hspace{0.0cm}'}t \,\,{\rm d} t + \frac {1}{(T_2\hspace{0.0cm}'\hspace{0.02cm})^2} \cdot
\int_{0}^{T_2\hspace{0.0cm}'}t^2 \,\,{\rm d} t\right ] = \ s_0^2 \cdot \left [ {T_2\hspace{0.0cm}'} - \frac {2}{T_2\hspace{0.0cm}'} \cdot
\frac {(T_2\hspace{0.0cm}'\hspace{0.02cm})^2}{2} + \frac {1}{(T_2\hspace{0.0cm}'\hspace{0.02cm})^2} \cdot
\frac {(T_2\hspace{0.0cm}'\hspace{0.02cm})^3}{3}\right ] = s_0^2
\cdot\frac {T_2\hspace{0.0cm}'\hspace{0.02cm}}{3}
\hspace{0.05cm}.$$
*Eingesetzt in obige Gleichung erhält man:
:$${E_{\rm B}}/{2}  = s_0^2  \cdot \frac {T_1}{2}+ s_0^2  \cdot \frac {T-T_1}{2 \cdot
3}= s_0^2  \cdot \left [\frac{T}{6} + \frac{T_1}{3}\right ]\hspace{0.3cm}
\hspace{0.3cm}\Rightarrow E_{\rm B}  = {s_0^2}/{3}\cdot  \left (T + 2 \cdot T_1 \right )\hspace{0.05cm}.$$
*Mit den angegebenen Werten ${s_{0}}^{2} = 10 \ \rm mW$ und $T = 3\ \rm &micro; s$ erhält man:
:$$T_1 = 0\text{:} \hspace{0.75cm} {E_{\rm B}}  = \ 1/3 \cdot{s_0^2 \cdot T}= 1/3 \cdot {10^{-2}\,{\rm W} \cdot 3 \cdot 10^{-6}\,{\rm s}} \hspace{0.1cm}\underline {=  1 \cdot 10^{-8}\,{\rm
Ws}}\hspace{0.05cm},$$
:$$T_1 = T/2\text{:} \hspace{0.2cm} {E_{\rm B}} = \ 2/3 \cdot{ s_0^2 \cdot T}= \hspace{2.6cm}\text{...} \hspace{1.4cm}\hspace{0.1cm}\underline {=  2 \cdot 10^{-8}\,{\rm
Ws}} \hspace{0.05cm},$$
:$$T_1 = T\text{:} \hspace{0.65cm} {E_{\rm B}} = \ { s_0^2 \cdot T}= \hspace{3.65cm}\text{...} \hspace{1.4cm}\hspace{0.1cm}\underline {=  3 \cdot 10^{-8}\,{\rm
Ws}} \hspace{0.05cm}.$$




'''(2)'''&nbsp; Der Systemwirkungsgrad bei Leistungsbegrenzung ist maximal $(\eta_{\rm L} = 1)$, wenn der Sendegrundimpuls $g_{s}(t)$ formgleich mit der Impulsantwort $h_{\rm E}(t)$ ist. Dies trifft hier für den NRZ–Sendeimpuls zu: &nbsp;  $T_1/T \ \underline{= 1}$.
'''(2)'''&nbsp; The system efficiency under power limitation is maximum&nbsp; $(\eta_{\rm L} = 1)$,&nbsp; when the basic transmission pulse&nbsp; $g_{s}(t)$&nbsp; has the same shape as the impulse response $h_{\rm E}(t)$.&nbsp;
*This is true here for the NRZ transmitted pulse: &nbsp;  $T_1/T \ \underline{= 1}$.




'''(3)'''&nbsp; Unter der in Teilaufgabe '''(2)''' genannten Bedingung erhält man das maximale SNR:
:$$\rho_{d, \hspace{0.05cm}{\rm max  \hspace{0.05cm}|  \hspace{0.05cm}
L}}= \frac{2 \cdot E_{\rm B}}{N_0} = \frac{2 \cdot 3 \cdot 10^{-8}\,{\rm Ws}}{3 \cdot 10^{-10}\,{\rm
W/Hz}}\hspace{0.1cm}\underline {= 200} \hspace{0.05cm}.$$


'''(3)'''&nbsp; Under the condition given in question&nbsp; '''(2)''',&nbsp; the maximum SNR is obtained:
:$$\rho_{d, \hspace{0.05cm}{\rm max  \hspace{0.05cm}|  \hspace{0.05cm}L}}= \frac{2 \cdot E_{\rm B}}{N_0} = \frac{2 \cdot 3 \cdot 10^{-8}\,{\rm Ws}}{3 \cdot 10^{-10}\,{\rm W/Hz}}\hspace{0.1cm}\underline {= 200} \hspace{0.05cm}.$$


'''(4)'''&nbsp; Allgemein gilt $g_{d}(t) = g_{s}(t) ∗ h_{\rm E}(t)$. Für $t = 0$ ergibt sich  mit $T_1 = T/2$ hierfür die Trapezfläche:
 
'''(4)'''&nbsp; In general,&nbsp; $g_{d}(t) = g_{s}(t) ∗ h_{\rm E}(t)$.&nbsp; For&nbsp; $t = 0$,&nbsp; $T_1 = T/2$&nbsp; gives the trapezoidal area for this:
:$$g_0 = g_d(t=0) = \frac{1}{T} \cdot \int_{-\infty}^{+\infty}g_s(t) \,{\rm d} t = \frac{T + T_1}{2} \cdot s_0 = 0.75 \cdot 0.1 \cdot \sqrt{\rm W} \hspace{0.1cm}\underline {= 0.075 \,\sqrt{\rm W}} \hspace{0.05cm}.$$
:$$g_0 = g_d(t=0) = \frac{1}{T} \cdot \int_{-\infty}^{+\infty}g_s(t) \,{\rm d} t = \frac{T + T_1}{2} \cdot s_0 = 0.75 \cdot 0.1 \cdot \sqrt{\rm W} \hspace{0.1cm}\underline {= 0.075 \,\sqrt{\rm W}} \hspace{0.05cm}.$$




'''(5)'''&nbsp; Mit $T_1 = T/2$ (trapezförmige Sendeimpulse) erhält man für das Signal–zu–Rausch–Verhältnis:
'''(5)'''&nbsp; With&nbsp; $T_1 = T/2$&nbsp; (trapezoidal transmitted pulses),&nbsp; we obtain for the signal-to-noise ratio:
:$$\rho_d = \frac{g_0^2}{\sigma_d^2}\hspace{0.3cm}{\rm mit}\hspace{0.3cm} g_0^2=0.075^2\, {\rm W},\hspace{0.1cm} \sigma_d^2 = \frac{N_0}{2 \cdot T} = 5 \cdot 10^{-5}\,{\rm W}\hspace{0.3cm}
:$$\rho_d = \frac{g_0^2}{\sigma_d^2}\hspace{0.3cm}{\rm with}\hspace{0.3cm} g_0^2=0.075^2\, {\rm W},\hspace{0.1cm} \sigma_d^2 = \frac{N_0}{2 \cdot T} = 5 \cdot 10^{-5}\,{\rm W}\hspace{0.3cm}\Rightarrow \hspace{0.3cm}\rho_d = \frac{0.075^2\, {\rm W}}{5 \cdot 10^{-5}\,{\rm W}} = 112.5 \hspace{0.05cm}.$$
\Rightarrow \hspace{0.3cm}\rho_d = \frac{0.075^2\, {\rm W}}{5 \cdot 10^{-5}\,{\rm W}} = 112.5 \hspace{0.05cm}.$$
*Thus,&nbsp; the system efficiency under power limitation with the result of&nbsp; '''(3)''':
*Somit ergibt sich für den Systemwirkungsgrad bei Leistungsbegrenzung mit dem Ergebnis aus '''(3)''':
:$$\eta_{\rm L} = \frac{\rho_d}{\rho_{d, \hspace{0.05cm}{\rm max \hspace{0.05cm} | \hspace{0.05cm} L}}}= \frac{112.5}{200}\hspace{0.1cm}\underline {= 0.5625 }\hspace{0.05cm}.$$
:$$\eta_{\rm L} = \frac{\rho_d}{\rho_{d, \hspace{0.05cm}{\rm max \hspace{0.05cm} | \hspace{0.05cm} L}}}= \frac{112.5}{200}\hspace{0.1cm}\underline {= 0.5625 }\hspace{0.05cm}.$$
*Aufgrund der Fehlanpassung ist $\eta_{\rm L} < 1$.
*Due to the mismatch, $\eta_{\rm L} < 1$.
 




'''(6)'''&nbsp; Mit dem Maximalwert $s_{0}$ und dem Ergebnis der Teilaufgabe '''(1)''' gilt:
'''(6)'''&nbsp; With the maximum value&nbsp; $s_{0}$&nbsp; and the result of&nbsp; '''(1)''':
:$$s_{\rm eff} = \sqrt{{ E_{\rm B}}/{T}}= \sqrt{{ 2/3 \cdot s_{0}^2}} \hspace{0.3cm} \Rightarrow \hspace{0.3cm}C_{\rm S} ={ s_{\rm 0}}/{s_{\rm eff}}= \sqrt{{ 3}/{2}}\hspace{0.1cm}\underline { \approx 1.225}\hspace{0.05cm}.$$
:$$s_{\rm eff} = \sqrt{{ E_{\rm B}}/{T}}= \sqrt{{ 2/3 \cdot s_{0}^2}} \hspace{0.3cm} \Rightarrow \hspace{0.3cm}C_{\rm S} ={ s_{\rm 0}}/{s_{\rm eff}}= \sqrt{{ 3}/{2}}\hspace{0.1cm}\underline { \approx 1.225}\hspace{0.05cm}.$$




'''(7)'''&nbsp; Der Systemwirkungsgrad bei Spitzenwertbegrenzung ist kleiner als der bei Leistungsbegrenzung, da hier neben der Fehlanpassung auch das nicht optimale Sendesignal (zu kleine Energie) eine Rolle spielt:
'''(7)'''&nbsp; The system efficiency under peak limitation is smaller than that under power limitation,&nbsp; <br>because the non-optimal transmitted signal&nbsp; (too small energy)&nbsp; plays a role here in addition to the mismatch:
:$$\eta_{\rm A} = \frac{1}{C_{\rm S}^2}\cdot \eta_{\rm L} = \frac{ 2}{3} \cdot 0.5625 =\hspace{0.1cm}\underline {  0.375} \hspace{0.05cm}.$$
:$$\eta_{\rm A} = \frac{1}{C_{\rm S}^2}\cdot \eta_{\rm L} = \frac{ 2}{3} \cdot 0.5625 =\hspace{0.1cm}\underline {  0.375} \hspace{0.05cm}.$$


Line 159: Line 130:




[[Category:Aufgaben zu Digitalsignalübertragung|^1.4 Optimierung der Basisbandsysteme^]]
[[Category:Digital Signal Transmission: Exercises|^1.4 Optimization of Baseband Systems^]]
[[de:Aufgaben:Aufgabe 1.7: Systemwirkungsgrade]]

Latest revision as of 17:58, 16 March 2026


Transmission pulse  "Trapezoid"

The receiver of a binary transmission system with symbol duration  $T$  consists of an integrator,  which is represented by the impulse response

$$h_{\rm E}(t) = \left\{ \begin{array}{c} 1/T \\0 \\ \end{array} \right.\quad\begin{array}{*{1}c} {\rm{for}}\\ {\rm{for}} \\ \end{array}\begin{array}{*{20}c}\hspace{0.05cm}|t| < T/2 \hspace{0.05cm}, \\|t| > T/2\hspace{0.05cm}. \\\end{array}$$

This is followed by a threshold decision with optimal parameters.

The basic transmission pulse  $g_{s}(t)$  according to the diagram is generally trapezoidal and is parameterized by the time  $T_{1}$: 

  • For  $T_{1} = 0$  the result is a triangular pulse,  for  $T_{1} = T$  the NRZ rectangle.
  • The absolute pulse duration  $T_{\rm S}$  is always equal to the symbol duration  $T$,  i.e. the spacing between two transmission pulses.


The signal-to-noise power ratio  $\rm (SNR)$  before the threshold decision can be calculated as follows,  assuming no intersymbol interfering:

$$\rho_d = {g_0^2}/{\sigma_d^2}\hspace{0.05cm}.$$

Here,  $g_{0} = g_{d}(t = 0)$  is the maximum value of the basic transmission pulse,  and

$$\sigma_d^2 = {N_0}/{2} \cdot \int_{-\infty}^{+\infty}|h_{\rm E}(t)|^2 \,{\rm d} t = \frac{N_0}{2 \cdot T}$$

the noise power after the receiver filter in the presence of AWGN noise at its input.

In the course of this exercise,  the following quantities will be used:

  • $\rho_{d,\rm\hspace{0.08cm} max \hspace{0.03cm}|\hspace{0.03cm} L}$  is the maximum SNR under the constraint of  "power limitation".
  • $\rho_{d,\rm\hspace{0.08cm} max \hspace{0.03cm}|\hspace{0.03cm} A}$  is the maximum SNR under the constraint of  "peak limitation"  (or  "amplitude limitation").


These definitions can be used to specify the system efficiencies:

$$\eta_{\rm L} = \ \frac{\rho_d}{\rho_{d, \hspace{0.08cm}{\rm max \hspace{0.05cm}|\hspace{0.05cm}L}}}\hspace{0.05cm},$$
$$\eta_{\rm A} = \ \frac{\rho_d}{\rho_{d, \hspace{0.08cm}{\rm max\hspace{0.05cm} |\hspace{0.05cm} A}}} = {1}/{C_{\rm S}^2}\cdot \eta_{\rm L} \hspace{0.05cm}.$$

Here,  the  "crest factor"   $C_{\rm S}$  denotes the ratio between the maximum value and the rms value  (root of power)  of the transmitted signal  $s(t)$.



Notes:

  • Use the following numerical values to solve the exercise:
$$s_0^2 = 10\,{\rm mW},\hspace{0.2cm}T = 3\,{\rm{ µ s}}, \hspace{0.2cm}N_0 = 3 \cdot 10^{-10}\,{\rm W/Hz}\hspace{0.05cm}.$$


Questions

1 Calculate the pulse energy  $E_{\rm B}$  as a function of  $T_{1}$.  What are the values for  $T_{1} = 0$,   $T_{1} = T/2$  and  $T_{1} = T$?

$T_{1} = 0\text{:} \hspace{0.75cm} E_{\rm B} \ = \ $ $\ \cdot 10^{-8} \, \rm Ws$
$T_{1} = T/2\text{:}\hspace{0.2cm} E_{\rm B} \ = \ $ $\ \cdot 10^{-8} \, \rm Ws$
$T_{1} = T\text{:}\hspace{0.65cm} E_{\rm B} \ = \ $ $\ \cdot 10^{-8} \, \rm Ws$

2 What value  $T_{1}$  leads to the maximum possible SNR when the power is limited?

$T_{1}/T \ = \ $

3 Therefore,  what is the maximum SNR with power limitation?

$\rho_{d,\hspace{0.08cm}\rm max \hspace{0.05cm}|\hspace{0.05cm} L} \ = \ $

4 How large is the basic transmitter pulse  $g_{d}(t)$  in pulse center for  $T_{1} = T/2$?

$g_{0} \ = \ $ $\ \rm \sqrt{W}$

5 Calculate the system efficiency  $\eta_{\rm L}$  when the power is limited  $(T_{1} = T/2)$.

$\eta_{\rm L} \ = \ $

6 Calculate the crest factor  $(T_{1} = T/2)$.

$C_{\rm S} \ = \ $

7 Calculate the system efficiency at peak limitation  $(T_{1} = T/2)$.

$\eta_{\rm A} \ = \ $


Solution

(1)  To simplify the calculations,  we set  $T_1' = T_1/2$  and  $T_2' = (T - T_1)/2$.

  • This gives for the transmitted pulse energy:
$$E_{\rm B} =\int_{-\infty}^{+\infty}g_s^2(t) \,{\rm d} t =2 \cdot \int_{0}^{T_1\hspace{0.0cm}'}g_s^2(t) \,{\rm d}t\hspace{0.2cm}+ \hspace{0.2cm}2 \cdot \int_{T_1\hspace{0.0cm}'}^{T/2}g_s^2(t) \,{\rm d} t\hspace{0.05cm}.$$
  • According to this division,  it can also be written:
$${E_{\rm B}}/{2} = s_0^2 \cdot T_1\hspace{0.0cm}' + E_2\hspace{0.05cm},\hspace{0.3cm}{\rm with}\hspace{0.3cm}E_{\rm 2} = \\int_{T_1\hspace{0.0cm}'}^{T/2}g_s^2(t) \,{\rm d} t= s_0^2 \cdot \int_{0}^{T_2\hspace{0.0cm}'}\left ( 1 - \frac {t}{T_2\hspace{0.0cm}'}\right )^2 \,{\rm d}t $$
$$\Rightarrow \hspace{0.3cm}E_{\rm 2} = \ s_0^2 \cdot \left [ \int_{0}^{T_2\hspace{0.0cm}'}\,\,{\rm d} t- \frac {2}{T_2\hspace{0.0cm}'} \cdot\int_{0}^{T_2\hspace{0.0cm}'}t \,\,{\rm d} t + \frac {1}{(T_2\hspace{0.0cm}'\hspace{0.02cm})^2} \cdot\int_{0}^{T_2\hspace{0.0cm}'}t^2 \,\,{\rm d} t\right ] = \ s_0^2 \cdot \left [ {T_2\hspace{0.0cm}'} - \frac {2}{T_2\hspace{0.0cm}'} \cdot\frac {(T_2\hspace{0.0cm}'\hspace{0.02cm})^2}{2} + \frac {1}{(T_2\hspace{0.0cm}'\hspace{0.02cm})^2} \cdot\frac {(T_2\hspace{0.0cm}'\hspace{0.02cm})^3}{3}\right ] = s_0^2\cdot\frac {T_2\hspace{0.0cm}'\hspace{0.02cm}}{3}\hspace{0.05cm}.$$
  • Substituted into the above equation one obtains:
$${E_{\rm B}}/{2} = s_0^2 \cdot \frac {T_1}{2}+ s_0^2 \cdot \frac {T-T_1}{2 \cdot3}= s_0^2 \cdot \left [\frac{T}{6} + \frac{T_1}{3}\right ]\hspace{0.3cm}\hspace{0.3cm}\Rightarrow E_{\rm B} = {s_0^2}/{3}\cdot \left (T + 2 \cdot T_1 \right )\hspace{0.05cm}.$$
  • With the given values  ${s_{0}}^{2} = 10 \ \rm mW$  and  $T = 3\ \rm µ s$  we obtain:
$$T_1 = 0\text{:} \hspace{0.75cm} {E_{\rm B}} = \ 1/3 \cdot{s_0^2 \cdot T}= 1/3 \cdot {10^{-2}\,{\rm W} \cdot 3 \cdot 10^{-6}\,{\rm s}} \hspace{0.1cm}\underline {= 1 \cdot 10^{-8}\,{\rm Ws}}\hspace{0.05cm},$$
$$T_1 = T/2\text{:} \hspace{0.2cm} {E_{\rm B}} = \ 2/3 \cdot{ s_0^2 \cdot T}= \hspace{2.6cm}\text{...} \hspace{1.4cm}\hspace{0.1cm}\underline {= 2 \cdot 10^{-8}\,{\rm Ws}} \hspace{0.05cm},$$
$$T_1 = T\text{:} \hspace{0.65cm} {E_{\rm B}} = \ { s_0^2 \cdot T}= \hspace{3.65cm}\text{...} \hspace{1.4cm}\hspace{0.1cm}\underline {= 3 \cdot 10^{-8}\,{\rm Ws}} \hspace{0.05cm}.$$


(2)  The system efficiency under power limitation is maximum  $(\eta_{\rm L} = 1)$,  when the basic transmission pulse  $g_{s}(t)$  has the same shape as the impulse response $h_{\rm E}(t)$. 

  • This is true here for the NRZ transmitted pulse:   $T_1/T \ \underline{= 1}$.


(3)  Under the condition given in question  (2),  the maximum SNR is obtained:

$$\rho_{d, \hspace{0.05cm}{\rm max \hspace{0.05cm}| \hspace{0.05cm}L}}= \frac{2 \cdot E_{\rm B}}{N_0} = \frac{2 \cdot 3 \cdot 10^{-8}\,{\rm Ws}}{3 \cdot 10^{-10}\,{\rm W/Hz}}\hspace{0.1cm}\underline {= 200} \hspace{0.05cm}.$$


(4)  In general,  $g_{d}(t) = g_{s}(t) ∗ h_{\rm E}(t)$.  For  $t = 0$,  $T_1 = T/2$  gives the trapezoidal area for this:

$$g_0 = g_d(t=0) = \frac{1}{T} \cdot \int_{-\infty}^{+\infty}g_s(t) \,{\rm d} t = \frac{T + T_1}{2} \cdot s_0 = 0.75 \cdot 0.1 \cdot \sqrt{\rm W} \hspace{0.1cm}\underline {= 0.075 \,\sqrt{\rm W}} \hspace{0.05cm}.$$


(5)  With  $T_1 = T/2$  (trapezoidal transmitted pulses),  we obtain for the signal-to-noise ratio:

$$\rho_d = \frac{g_0^2}{\sigma_d^2}\hspace{0.3cm}{\rm with}\hspace{0.3cm} g_0^2=0.075^2\, {\rm W},\hspace{0.1cm} \sigma_d^2 = \frac{N_0}{2 \cdot T} = 5 \cdot 10^{-5}\,{\rm W}\hspace{0.3cm}\Rightarrow \hspace{0.3cm}\rho_d = \frac{0.075^2\, {\rm W}}{5 \cdot 10^{-5}\,{\rm W}} = 112.5 \hspace{0.05cm}.$$
  • Thus,  the system efficiency under power limitation with the result of  (3):
$$\eta_{\rm L} = \frac{\rho_d}{\rho_{d, \hspace{0.05cm}{\rm max \hspace{0.05cm} | \hspace{0.05cm} L}}}= \frac{112.5}{200}\hspace{0.1cm}\underline {= 0.5625 }\hspace{0.05cm}.$$
  • Due to the mismatch, $\eta_{\rm L} < 1$.


(6)  With the maximum value  $s_{0}$  and the result of  (1):

$$s_{\rm eff} = \sqrt{{ E_{\rm B}}/{T}}= \sqrt{{ 2/3 \cdot s_{0}^2}} \hspace{0.3cm} \Rightarrow \hspace{0.3cm}C_{\rm S} ={ s_{\rm 0}}/{s_{\rm eff}}= \sqrt{{ 3}/{2}}\hspace{0.1cm}\underline { \approx 1.225}\hspace{0.05cm}.$$


(7)  The system efficiency under peak limitation is smaller than that under power limitation, 
because the non-optimal transmitted signal  (too small energy)  plays a role here in addition to the mismatch:

$$\eta_{\rm A} = \frac{1}{C_{\rm S}^2}\cdot \eta_{\rm L} = \frac{ 2}{3} \cdot 0.5625 =\hspace{0.1cm}\underline { 0.375} \hspace{0.05cm}.$$