Aufgaben:Exercise 2.2Z: Real Two-Path Channel: Difference between revisions

From LNTwww
Die Seite wurde neu angelegt: „ {{quiz-Header|Buchseite=Mobile Kommunikation/Mehrwegeempfang beim Mobilfunk}} right|frame|Zweiwege–Szenario Betrachtet wi…“
 
Fix interlanguage link: resolve redirect chain
 
(20 intermediate revisions by 3 users not shown)
Line 1: Line 1:


{{quiz-Header|Buchseite=Mobile Kommunikation/Mehrwegeempfang beim Mobilfunk}}
{{quiz-Header|Buchseite=Mobile_Communications/Multipath_Reception_in_Mobile_Communications}}


[[File:P_ID2159__Mob_Z_2_2.png|right|frame|Zweiwege–Szenario]]
[[File:EN_Mob_A_2_2Z.png|right|frame|Two-path scenario]]
Betrachtet wird das skizzierte Szenario, bei dem das Sendesignal  $s(t)$  die Antenne des Empfängers über zwei Wege erreicht:
The sketched scenario is considered in which the transmitted signal  $s(t)$  reaches the antenna of the receiver via two paths:
:$$r(t) \hspace{-0.15cm} \ = \ \hspace{-0.15cm} r_1(t) + r_2(t) =k_1 \cdot s( t - \tau_1) + k_2 \cdot s( t - \tau_2)
:$$r(t) \hspace{-0.15cm} \ = \ \hspace{-0.15cm} r_1(t) + r_2(t) =k_1 \cdot s( t - \tau_1) + k_2 \cdot s( t - \tau_2)\hspace{0.05cm}.$$
  \hspace{0.05cm}.$$


Dabei ist zu beachten:
Note the following:
* Die Laufzeiten  $\tau_1$  und  $\tau_2$  auf Haupt– und Nebenpfad können aus den Pfadlängen  $d_1$  und  $d_2$  unter Verwendung der Lichtgeschwindigkeit  $c = 3 \cdot 10^8 \ \rm m/s$  berechnet werden.
* The delays  $\tau_1$  and  $\tau_2$  of the main and the secondary paths can be calculated from the path lengths  $d_1$  and  $d_2$  using the speed of light  $c = 3 \cdot 10^8 \ \rm m/s$ .
* Die Amplitudenfaktoren  $k_1$  und  $k_2$  sollen vereinfachend gemäß dem Pfadverlustmodell mit dem Pfadverlustexponenten  $\gamma = 2$  angenommen werden (Freiraumdämpfung).
* The amplitude factors  $k_1$  and  $k_2$  are obtained according to the path loss model with path loss exponent  $\gamma = 2$  (free–space attenuation).
* Die Höhe der Sendeantenne ist  $h_{\rm S} = 500 \ \rm m$, die der Empfangsantenne  $h_{\rm E} = 30 \ \rm m$. Die Antennen stehen im Abstand von  $d = 10 \ \rm km$.  
* The height of the transmit antenna is  $h_{\rm S} = 500 \ \rm m$.  The height of the receiving antenna is  $h_{\rm E} = 30 \ \rm m$.  The antennas are separated by a distance of  $d = 10 \ \ \rm km$.  
* Die Reflektion auf dem Nebenpfad führt zu einer Phasenänderung um  $\pi$, so dass man die Teilsignale subtrahieren muss. Dies wird durch einen negativen  $k_2$–Wert berücksichtigt.
* The reflection on the secondary path causes a phase change of  $\pi$, so that the partial signals must be subtracted.  This is taken into account by a negative  $k_2$ value.




Line 17: Line 16:




''Hinweis:''  
''Note:''  
* Die Aufgabe gehört zum Kapitel  [[Mobile_Kommunikation/Mehrwegeempfang_beim_Mobilfunk| Mehrwegeempfang beim Mobilfunk]].
* This task belongs to the chapter   [[Mobile_Communications/Multi-Path_Reception_in_Mobile_Communications| Multi–Path Reception in Mobile Communications]].
   
   






===Fragebogen===
===Questionnaire===
<quiz display=simple>
<quiz display=simple>
{Berechnen Sie die Länge&nbsp; $d_1$&nbsp; des direkten Pfades.
{Calculate the length&nbsp; $d_1$&nbsp; of the direct path.
|type="{}"}
|type="{}"}
$d_1 \ = \ ${ 10011 1% } $\ \rm m$
$d_1 \ = \ ${ 10011 1% } $\ \ \rm m$


{Berechnen Sie die Länge&nbsp; $d_2$&nbsp; des Umwegpfades.
{Calculate the length&nbsp; $d_2$&nbsp; of the reflected path.
|type="{}"}
|type="{}"}
$d_2 \ = \ ${ 10014 1% } $\ \rm m$
$d_2 \ = \ ${ 10014 1% } $\ \ \rm m$


{Welche Differenzen&nbsp; $\Delta d = d_2 \ - d_1$&nbsp; und&nbsp; $\Delta \tau = \tau_2 -\tau_1$&nbsp; (Laufzeit) ergeben sich nach exakter Rechnung?
{Which differences&nbsp; $\Delta d = d_2 \ - d_1$&nbsp; and&nbsp; $\Delta \tau = \tau_2 -\tau_1$&nbsp; (term) result from exact calculation?
|type="{}"}
|type="{}"}
$\Delta d \ = \ ${ 2.996 3% } $\ \rm m$
$\Delta d \ = \ ${ 2,996 3% } $\ \ \rm m$
$\Delta \tau \ = \ ${ 9.987 3% } $\ \rm ns$
$\Delta \tau \ = \ ${ 9,987 3% } $\ \ \rm ns$


{Welche Gleichung ergibt sich für die Laufzeitdifferenz&nbsp; $\Delta \tau$&nbsp; mit der für kleine&nbsp; $\varepsilon$&nbsp; gültigen Näherung $\sqrt{(1 + \varepsilon)} \approx 1 + \varepsilon/2$?
{What equation results for the path delay difference&nbsp; $\Delta \tau$&nbsp; with the approximation $\sqrt{(1 + \varepsilon)} \approx 1 + \varepsilon/2$&nbsp; valid for small&nbsp; $\varepsilon$&nbsp;?
|type="[]"}
|type="[]"}
- $\Delta \tau = (h_{\rm S} \ - h_{\rm E})/d$,
- $\Delta \tau = (h_{\rm S} \ - h_{\rm E})/d$,
Line 44: Line 43:
+ $\Delta \tau = 2 \cdot h_{\rm S} \cdot h_{\rm E}/(c \cdot d)$.
+ $\Delta \tau = 2 \cdot h_{\rm S} \cdot h_{\rm E}/(c \cdot d)$.


{Welche Aussagen treffen für die Amplitudenkoeffizienten&nbsp; $k_1$&nbsp; und&nbsp; $k_2$&nbsp; zu?
{Which statements apply for the amplitude coefficients&nbsp; $k_1$&nbsp; and&nbsp; $k_2$&nbsp;?
|type="[]"}
|type="[]"}
+ Die Koeffizienten&nbsp; $k_1$&nbsp; und&nbsp; $k_2$&nbsp; sind betragsmäßig nahezu gleich.
+ The coefficients&nbsp; $k_1$&nbsp; and&nbsp; $k_2$&nbsp; are almost equal in magnitude.
- Die Beträge&nbsp; $|k_1|$&nbsp; und&nbsp; $|k_2|$&nbsp; unterscheiden sich deutlich.
- The magnitudes&nbsp; $|k_1|$&nbsp; and&nbsp; $|k_2|$&nbsp; differ significantly.
+ Die Koeffizienten&nbsp; $|k_1|$&nbsp; und&nbsp; $|k_2|$&nbsp; unterscheiden sich im Vorzeichen.
+ The coefficients&nbsp; $|k_1|$&nbsp; and&nbsp; $|k_2|$&nbsp; differ in sign.
</quiz>
</quiz>


===Musterlösung===
===Solution===
{{ML-Kopf}}
{{ML-Kopf}}
'''(1)'''&nbsp; Mit den Bezeichnungen in der Veranschaulichungsskizze ergibt sich nach &bdquo;Pythagoras&rdquo;:
'''(1)'''&nbsp; According to Pythagoras:
:$$d_1 = \sqrt{d^2 + (h_{\rm S}- h_{\rm E})^2} = \sqrt{10^2 + (0.5- 0.03)^2} \,\,{\rm km} \hspace{0.1cm} \underline {=10011.039\,{\rm m}}
:$$d_1 = \sqrt{d^2 + (h_{\rm S}- h_{\rm E})^2} = \sqrt{10^2 + (0.5- 0.03)^2} \,\,{\rm km} \hspace{0.1cm} \underline {=10011.039\,{\rm m}}\hspace{0.05cm}.$$
  \hspace{0.05cm}.$$


*Eigentlich ist die Angabe einer solchen Länge mit der Genauigkeit eines Millimeters nicht sehr sinnvoll und widerspricht der Mentalität eines Ingenieurs.  
*Actually, specifying such a length with an accuracy of one millimeter is not very useful and contradicts the mentality of an engineer.  
*Wir haben das hier trotzdem gemacht, um die Genauigkeit der in der Teilaufgabe (4) gesuchten Näherung überprüfen zu können.
*We have done this anyway to be able to check the accuracy of the approximation in subtask&nbsp; '''(4)'''.






'''(2)'''&nbsp; Klappt man den reflektierten Strahl rechts vpn $x_{\rm R}$ nach unten (Spiegelung am Erdboden), so erhält man wiederum ein rechtwinkliges Dreieck. Daraus folgt:
'''(2)'''&nbsp; If you fold the reflected beam on the right side of&nbsp; $x_{\rm R}$&nbsp; downwards&nbsp; (reflection on the ground), you get again a right triangle.&nbsp; From this follows:
:$$d_2 = \sqrt{d^2 + (h_{\rm S}+ h_{\rm E})^2} = \sqrt{10^2 + (0.5+ 0.03)^2} \,\,{\rm km} \hspace{0.1cm} \underline {=10014.035\,{\rm m}}
:$$d_2 = \sqrt{d^2 + (h_{\rm S}+ h_{\rm E})^2} = \sqrt{10^2 + (0.5+ 0.03)^2} \,\,{\rm km} \hspace{0.1cm} \underline {=10014.035\,{\rm m}}\hspace{0.05cm}.$$
  \hspace{0.05cm}.$$




'''(3)'''&nbsp; Mit den Ergebnissen aus '''(1)''' und '''(2)''' erhält man für die Längen&ndash; und die Laufzeitdifferenz:
'''(3)'''&nbsp; Using the results from&nbsp; '''(1)'''&nbsp; and&nbsp; '''(2)''', the length and delay differences are:
:$$\Delta d = d_2 - d_1 = \hspace{0.1cm} \underline {=2.996\,{\rm m}}
:$$\Delta d = d_2 - d_1 = \hspace{0.1cm} \underline {=2.996\,{\rm m}}\hspace{0.05cm},\hspace{1cm}\Delta \tau = \frac{\Delta d}{c} =  \frac{2.996\,{\rm m}}{3 \cdot 10^8 \,{\rm m/s}}  \hspace{0.1cm} \underline {=9.987\,{\rm ns}}\hspace{0.05cm}.$$
  \hspace{0.05cm},\hspace{1cm}
\Delta \tau = \frac{\Delta d}{c} =  \frac{2.996\,{\rm m}}{3 \cdot 10^8 \,{\rm m/s}}  \hspace{0.1cm} \underline {=9.987\,{\rm ns}}
  \hspace{0.05cm}.$$




'''(4)'''&nbsp; Mit $h_{\rm S} + h_{\rm E} \ll d$ lassen sich die obigen Gleichung wie folgt ausdrücken:
'''(4)'''&nbsp; With&nbsp; $h_{\rm S} + h_{\rm E} \ll d$&nbsp; the above equation can be expressed as follows:
:$$d_1 \hspace{-0.1cm} \ = \ \hspace{-0.1cm} d \cdot \sqrt{1 + \frac{(h_{\rm S}- h_{\rm E})^2}{d^2}} \approx  d \cdot \left [ 1 + \frac{(h_{\rm S}- h_{\rm E})^2}{2d^2} \right ] \hspace{0.05cm},\hspace{1cm}
:$$d_1 \hspace{-0.1cm} \ = \ \hspace{-0.1cm} d \cdot \sqrt{1 + \frac{(h_{\rm S}- h_{\rm E})^2}{d^2}} \approx  d \cdot \left [ 1 + \frac{(h_{\rm S}- h_{\rm E})^2}{2d^2} \right ] \hspace{0.05cm},\hspace{1cm}d_2 \hspace{-0.1cm} \ = \ \hspace{-0.1cm} d \cdot \sqrt{1 + \frac{(h_{\rm S}+ h_{\rm E})^2}{d^2}} \approx  d \cdot \left [ 1 + \frac{(h_{\rm S}+ h_{\rm E})^2}{2d^2} \right ] $$
d_2 \hspace{-0.1cm} \ = \ \hspace{-0.1cm} d \cdot \sqrt{1 + \frac{(h_{\rm S}+ h_{\rm E})^2}{d^2}} \approx  d \cdot \left [ 1 + \frac{(h_{\rm S}+ h_{\rm E})^2}{2d^2} \right ] $$
:$$\Rightarrow \hspace{0.3cm} \Delta d = d_2 - d_1 \approx \frac {1}{2d} \cdot \left [ (h_{\rm S}+ h_{\rm E})^2 - (h_{\rm S}- h_{\rm E})^2 \right ]=  \frac {2 \cdot h_{\rm S}\cdot h_{\rm E}}{d}\hspace{0.3cm}\Rightarrow \hspace{0.3cm} \Delta \tau = \frac{\Delta d}{c} \approx  \frac {2 \cdot h_{\rm S}\cdot h_{\rm E}}{c \cdot d}\hspace{0.05cm}.$$
:$$\Rightarrow \hspace{0.3cm} \Delta d = d_2 - d_1 \approx \frac {1}{2d} \cdot \left [ (h_{\rm S}+ h_{\rm E})^2 - (h_{\rm S}- h_{\rm E})^2 \right ]
=  \frac {2 \cdot h_{\rm S}\cdot h_{\rm E}}{d}\hspace{0.3cm}
\Rightarrow \hspace{0.3cm} \Delta \tau = \frac{\Delta d}{c} \approx  \frac {2 \cdot h_{\rm S}\cdot h_{\rm E}}{c \cdot d}
  \hspace{0.05cm}.$$


*Richtig ist also der <u>Lösungsvorschlag 3</u>. Mit den vorgegebenen Zahlenwerten erhält man hierfür:
*So the correct solution is the <u>solution 3</u>.&nbsp; With the given numerical values, we have
:$$\Delta \tau  \approx  \frac {2 \cdot 500\,{\rm m}\cdot 30\,{\rm m}}{3 \cdot 10^8 \,{\rm m/s} \cdot 10000\,{\rm m}} = 10^{-8}\,{\rm s} = 10\,{\rm ns}
:$$\Delta \tau  \approx  \frac {2 \cdot 500\,{\rm m}\cdot 30\,{\rm m}}{3 \cdot 10^8 \,{\rm m/s} \cdot 10000\,{\rm m}} = 10^{-8}\,{\rm s} = 10\,{\rm ns}\hspace{0.05cm}.$$
  \hspace{0.05cm}.$$


*Die relative Verfälschung gegenüber dem tatsächlichen Wert entsprechend Teilaufgabe '''(3)''' beträgt nur $0.13\%$.  
*The relative error with respect to the actual value according to the subtask&nbsp; '''(3)'''&nbsp; is only&nbsp; $0.13\%$.  
*Beim Lösungsvorschlag 1 stimmt schon die Einheit nicht.  
*In solutions 1 and 2, the dimensions are wrong.  
*Bei Lösungsvorschlag 2 käme es zu keiner Laufzeitverschiebung, wenn beide Antennen die gleiche Höhe hätten. Dies trifft sicher nicht zu.
*In solution 2, there would be no propagation delay if both antennas were the same height.&nbsp; This is clearly not true.






'''(5)'''&nbsp; Der Pfadverlustexponent $\gamma = 2$ sagt aus, dass die Empfangsleistung $P_{\rm E}$ quadratisch mit der Distanz abnimmt.  
'''(5)'''&nbsp; The path loss exponent&nbsp; $\gamma = 2$&nbsp; implies that the reception power&nbsp; $P_{\rm E}$&nbsp; decreases quadratically with distance.  
*Die Signalamplitude nimmt also mit $1/d$ ab, und mit einer Konstanten $K$ gilt:
*The signal amplitude thus decreases with&nbsp; $1/d$, so for some constant&nbsp; $K$&nbsp; we have
:$$k_1 = \frac {K}{d_1} \hspace{0.05cm},\hspace{0.2cm}|k_2| = \frac {K}{d_2} \hspace{0.3cm} \Rightarrow \hspace{0.3cm}
:$$k_1 = \frac {K}{d_1} \hspace{0.05cm},\hspace{0.2cm}|k_2| = \frac {K}{d_2} \hspace{0.3cm} \Rightarrow \hspace{0.3cm}\frac {|k_2|}{k_1} = \frac {d_1}{d_2}= \frac {10011,039\,{\rm m}}{10014,035\,{\rm m}} \approx 0.99 \hspace{0.05cm}.$$
  \frac {|k_2|}{k_1} = \frac {d_1}{d_2}= \frac {10011.039\,{\rm m}}{10014.035\,{\rm m}} \approx 0.99 \hspace{0.05cm}.$$


*Die beiden Pfadgewichte unterscheiden sich somit im Betrag nur um etwa $1\%$.  
*The two path weights thus only differ in magnitude by about&nbsp; $1\%$.  
*Allerdings haben die Koeffizienten $k_1$ und $k_2$ verschiedene Vorzeichen &nbsp; &#8658; &nbsp; Richtig sind die <u>Antworten 1 und 3</u>.
*In addition, the coefficients&nbsp; $k_1$&nbsp; and&nbsp; $k_2$&nbsp; have different signs &nbsp; &#8658; &nbsp; <u>Answers 1 and 3</u>&nbsp; are correct.
{{ML-Fuß}}
{{ML-Fuß}}






 
[[Category:Mobile Communications: Exercises|^2.2 Multi-Path Reception in Wireless Systems^]]
 
[[de:Aufgaben:Exercise 2.2Z: Real Two-Path Channel]]
[[Category:Exercises for Mobile Communications|^2.2 Multi-Path Reception in Wireless Systems^]]

Latest revision as of 17:55, 16 March 2026

Two-path scenario

The sketched scenario is considered in which the transmitted signal  $s(t)$  reaches the antenna of the receiver via two paths:

$$r(t) \hspace{-0.15cm} \ = \ \hspace{-0.15cm} r_1(t) + r_2(t) =k_1 \cdot s( t - \tau_1) + k_2 \cdot s( t - \tau_2)\hspace{0.05cm}.$$

Note the following:

  • The delays  $\tau_1$  and  $\tau_2$  of the main and the secondary paths can be calculated from the path lengths  $d_1$  and  $d_2$  using the speed of light  $c = 3 \cdot 10^8 \ \rm m/s$ .
  • The amplitude factors  $k_1$  and  $k_2$  are obtained according to the path loss model with path loss exponent  $\gamma = 2$  (free–space attenuation).
  • The height of the transmit antenna is  $h_{\rm S} = 500 \ \rm m$.  The height of the receiving antenna is  $h_{\rm E} = 30 \ \rm m$.  The antennas are separated by a distance of  $d = 10 \ \ \rm km$.
  • The reflection on the secondary path causes a phase change of  $\pi$, so that the partial signals must be subtracted.  This is taken into account by a negative  $k_2$ value.



Note:



Questionnaire

1 Calculate the length  $d_1$  of the direct path.

$d_1 \ = \ $ $\ \ \rm m$

2 Calculate the length  $d_2$  of the reflected path.

$d_2 \ = \ $ $\ \ \rm m$

3 Which differences  $\Delta d = d_2 \ - d_1$  and  $\Delta \tau = \tau_2 -\tau_1$  (term) result from exact calculation?

$\Delta d \ = \ $ $\ \ \rm m$
$\Delta \tau \ = \ $ $\ \ \rm ns$

4 What equation results for the path delay difference  $\Delta \tau$  with the approximation $\sqrt{(1 + \varepsilon)} \approx 1 + \varepsilon/2$  valid for small  $\varepsilon$ ?

$\Delta \tau = (h_{\rm S} \ - h_{\rm E})/d$,
$\Delta \tau = (h_{\rm S} \ - h_{\rm E})/(c \cdot d)$,
$\Delta \tau = 2 \cdot h_{\rm S} \cdot h_{\rm E}/(c \cdot d)$.

5 Which statements apply for the amplitude coefficients  $k_1$  and  $k_2$ ?

The coefficients  $k_1$  and  $k_2$  are almost equal in magnitude.
The magnitudes  $|k_1|$  and  $|k_2|$  differ significantly.
The coefficients  $|k_1|$  and  $|k_2|$  differ in sign.


Solution

(1)  According to Pythagoras:

$$d_1 = \sqrt{d^2 + (h_{\rm S}- h_{\rm E})^2} = \sqrt{10^2 + (0.5- 0.03)^2} \,\,{\rm km} \hspace{0.1cm} \underline {=10011.039\,{\rm m}}\hspace{0.05cm}.$$
  • Actually, specifying such a length with an accuracy of one millimeter is not very useful and contradicts the mentality of an engineer.
  • We have done this anyway to be able to check the accuracy of the approximation in subtask  (4).


(2)  If you fold the reflected beam on the right side of  $x_{\rm R}$  downwards  (reflection on the ground), you get again a right triangle.  From this follows:

$$d_2 = \sqrt{d^2 + (h_{\rm S}+ h_{\rm E})^2} = \sqrt{10^2 + (0.5+ 0.03)^2} \,\,{\rm km} \hspace{0.1cm} \underline {=10014.035\,{\rm m}}\hspace{0.05cm}.$$


(3)  Using the results from  (1)  and  (2), the length and delay differences are:

$$\Delta d = d_2 - d_1 = \hspace{0.1cm} \underline {=2.996\,{\rm m}}\hspace{0.05cm},\hspace{1cm}\Delta \tau = \frac{\Delta d}{c} = \frac{2.996\,{\rm m}}{3 \cdot 10^8 \,{\rm m/s}} \hspace{0.1cm} \underline {=9.987\,{\rm ns}}\hspace{0.05cm}.$$


(4)  With  $h_{\rm S} + h_{\rm E} \ll d$  the above equation can be expressed as follows:

$$d_1 \hspace{-0.1cm} \ = \ \hspace{-0.1cm} d \cdot \sqrt{1 + \frac{(h_{\rm S}- h_{\rm E})^2}{d^2}} \approx d \cdot \left [ 1 + \frac{(h_{\rm S}- h_{\rm E})^2}{2d^2} \right ] \hspace{0.05cm},\hspace{1cm}d_2 \hspace{-0.1cm} \ = \ \hspace{-0.1cm} d \cdot \sqrt{1 + \frac{(h_{\rm S}+ h_{\rm E})^2}{d^2}} \approx d \cdot \left [ 1 + \frac{(h_{\rm S}+ h_{\rm E})^2}{2d^2} \right ] $$
$$\Rightarrow \hspace{0.3cm} \Delta d = d_2 - d_1 \approx \frac {1}{2d} \cdot \left [ (h_{\rm S}+ h_{\rm E})^2 - (h_{\rm S}- h_{\rm E})^2 \right ]= \frac {2 \cdot h_{\rm S}\cdot h_{\rm E}}{d}\hspace{0.3cm}\Rightarrow \hspace{0.3cm} \Delta \tau = \frac{\Delta d}{c} \approx \frac {2 \cdot h_{\rm S}\cdot h_{\rm E}}{c \cdot d}\hspace{0.05cm}.$$
  • So the correct solution is the solution 3.  With the given numerical values, we have
$$\Delta \tau \approx \frac {2 \cdot 500\,{\rm m}\cdot 30\,{\rm m}}{3 \cdot 10^8 \,{\rm m/s} \cdot 10000\,{\rm m}} = 10^{-8}\,{\rm s} = 10\,{\rm ns}\hspace{0.05cm}.$$
  • The relative error with respect to the actual value according to the subtask  (3)  is only  $0.13\%$.
  • In solutions 1 and 2, the dimensions are wrong.
  • In solution 2, there would be no propagation delay if both antennas were the same height.  This is clearly not true.


(5)  The path loss exponent  $\gamma = 2$  implies that the reception power  $P_{\rm E}$  decreases quadratically with distance.

  • The signal amplitude thus decreases with  $1/d$, so for some constant  $K$  we have
$$k_1 = \frac {K}{d_1} \hspace{0.05cm},\hspace{0.2cm}|k_2| = \frac {K}{d_2} \hspace{0.3cm} \Rightarrow \hspace{0.3cm}\frac {|k_2|}{k_1} = \frac {d_1}{d_2}= \frac {10011,039\,{\rm m}}{10014,035\,{\rm m}} \approx 0.99 \hspace{0.05cm}.$$
  • The two path weights thus only differ in magnitude by about  $1\%$.
  • In addition, the coefficients  $k_1$  and  $k_2$  have different signs   ⇒   Answers 1 and 3  are correct.