Difference between revisions of "Aufgaben:Exercise 1.3Z: Exponentially Decreasing Impulse Response"

From LNTwww
 
(7 intermediate revisions by 2 users not shown)
Line 2: Line 2:
 
{{quiz-Header|Buchseite=Linear_and_Time_Invariant_Systems/System_Description_in_Time_Domain}}
 
{{quiz-Header|Buchseite=Linear_and_Time_Invariant_Systems/System_Description_in_Time_Domain}}
  
[[File:P_ID819__LZI_Z_1_3.png |right|frame|Dropping impulse response]]
+
[[File:P_ID819__LZI_Z_1_3.png |right|frame|Decreasing impulse response]]
Gemessen wurde die Impulsantwort  $h(t)$  eines LZI–Systems,  
+
The impulse response  $h(t)$  of an LTI system, which
*die für alle Zeiten&nbsp; $t < 0$&nbsp; identisch Null ist,
+
*is identically zero for all times&nbsp; $t < 0$,
*sich zur Zeit&nbsp; $t > 0$&nbsp; sprungartig verändert, und
+
*changes abruptly at time&nbsp; $t > 0$,&nbsp; and
*für&nbsp; $t > 0$&nbsp; entsprechend einer Exponentialfunktion abfällt:
+
*decreases for&nbsp; $t > 0$&nbsp; according to an exponential function:
:$$h(t) = {1}/{T} \cdot {\rm e}^{-t/T}.$$
+
:$$h(t) = {1}/{T} \cdot {\rm e}^{-t/T},$$ was measured.
Der Parameter sei&nbsp; $T = 1 \hspace{0.05cm} \rm ms$. In der Teilaufgabe&nbsp; '''(3)''' ist nach der&nbsp; 3dB–Grenzfrequenz&nbsp; $f_{\rm G}$&nbsp; gefragt, die wie folgt (implizit) definiert ist:  
+
Let the parameter be&nbsp; $T = 1 \hspace{0.15cm} \rm ms$.&nbsp; In the subtask&nbsp; '''(3)''' &nbsp; the 3dB cut-off frequency&nbsp; $f_{\rm G}$&nbsp; is to be determined, which is (implicitly) defined as follows:  
 
:$$|H(f = f_{\rm G})| = {1}/{\sqrt{2}} \cdot|H(f = 0)| .$$
 
:$$|H(f = f_{\rm G})| = {1}/{\sqrt{2}} \cdot|H(f = 0)| .$$
  
Line 20: Line 20:
  
 
''Please note:''  
 
''Please note:''  
*The task belongs to the chapter&nbsp; [[Linear_and_Time_Invariant_Systems/System_Description_in_Time_Domain|System Description in Time Domain]].  
+
*The exercise belongs to the chapter&nbsp; [[Linear_and_Time_Invariant_Systems/System_Description_in_Time_Domain|System Description in Time Domain]].  
 
*The following definite integral is given:  
 
*The following definite integral is given:  
 
:$$\int_{ 0 }^{ \infty } \frac{1}{1+x^2}  \hspace{0.1cm}{\rm d}x = {\pi}/{2} .$$
 
:$$\int_{ 0 }^{ \infty } \frac{1}{1+x^2}  \hspace{0.1cm}{\rm d}x = {\pi}/{2} .$$
Line 32: Line 32:
  
 
<quiz display=simple>
 
<quiz display=simple>
{Compute the frequency response&nbsp; $H(f)$. What value is obtained for&nbsp; $f = 0$?
+
{Compute the frequency response&nbsp; $H(f)$.&nbsp; What value is obtained for&nbsp; $f = 0$?
 
|type="{}"}
 
|type="{}"}
 
$H(f = 0) \ = \ $ { 1 3% }
 
$H(f = 0) \ = \ $ { 1 3% }
Line 42: Line 42:
  
  
{Compute the 3dB–cutoff frequency&nbsp; $f_{\rm G}$.
+
{Compute the 3dB cut-off frequency&nbsp; $f_{\rm G}$.
 
|type="{}"}
 
|type="{}"}
 
$f_{\rm G}  \ =\ $ { 159 3% } &nbsp;$\rm Hz$
 
$f_{\rm G}  \ =\ $ { 159 3% } &nbsp;$\rm Hz$
Line 57: Line 57:
 
</quiz>
 
</quiz>
  
===Sample solution===
+
===Solution===
 
{{ML-Kopf}}
 
{{ML-Kopf}}
 
'''(1)'''&nbsp; The frequency response&nbsp; $H(f)$&nbsp; is the Fourier transform of&nbsp; $h(t)$:
 
'''(1)'''&nbsp; The frequency response&nbsp; $H(f)$&nbsp; is the Fourier transform of&nbsp; $h(t)$:
Line 78: Line 78:
 
*Using the given definite integral with the result&nbsp; $π/2$&nbsp; the following is obtained:  
 
*Using the given definite integral with the result&nbsp; $π/2$&nbsp; the following is obtained:  
 
:$$h(t=0)= \frac{1}{2 T} \hspace{0.15cm}\underline{= {\rm 500\cdot 1/s}}.$$
 
:$$h(t=0)= \frac{1}{2 T} \hspace{0.15cm}\underline{= {\rm 500\cdot 1/s}}.$$
*The result shows that the impulse response at&nbsp; $t = 0$&nbsp; is equal to the mean value of the left-hand&ndash; and right-hand limits.  
+
*The result shows that the impulse response at&nbsp; $t = 0$&nbsp; is equal to the mean value of the left-hand and right-hand limits.  
  
  
  
'''(3)'''&nbsp; The amplitude response in this task or in general with the 3dB-cutoff frequency&nbsp; $f_{\rm G}$ is:  
+
'''(3)'''&nbsp; The amplitude response in this task or in general with the 3dB cut-off frequency&nbsp; $f_{\rm G}$ is:  
 
:$$|H(f)|  =  \frac{1}{\sqrt{1+(2\pi fT)^2}} = \frac{1}{\sqrt{1+(f/f_{\rm G})^2}}.$$
 
:$$|H(f)|  =  \frac{1}{\sqrt{1+(2\pi fT)^2}} = \frac{1}{\sqrt{1+(f/f_{\rm G})^2}}.$$
*By comparing coefficients one obtains:  
+
*By comparing the coefficients one obtains:  
 
:$$f_{\rm G} = \frac{1}{2\pi T} \hspace{0.15cm}\underline{= {\rm 159 \hspace{0.1cm} Hz}}.$$
 
:$$f_{\rm G} = \frac{1}{2\pi T} \hspace{0.15cm}\underline{= {\rm 159 \hspace{0.1cm} Hz}}.$$
  
  
  
'''(4)'''&nbsp; <u>The first approach</u> is correct:
+
'''(4)'''&nbsp; <u>The first statement</u> is correct:
*Due to&nbsp; $h(t) = 0$&nbsp; &nbsp;for&nbsp; $t < 0$&nbsp; the system is indeed causal. It is a <u>low-pass filter of first order</u>.  
+
*Due to&nbsp; $h(t) = 0$&nbsp; &nbsp;for&nbsp; $t < 0$:&nbsp; The system is indeed causal.&nbsp; It is a <u>low-pass filter of first order</u>.  
 
*In contrast, a high-pass filter would have to satisfy the following condition:  
 
*In contrast, a high-pass filter would have to satisfy the following condition:  
 
:$$H(f = 0) = \int_{-\infty}^{+\infty}h(t) \hspace{0.15cm}{\rm d}t = 0.$$
 
:$$H(f = 0) = \int_{-\infty}^{+\infty}h(t) \hspace{0.15cm}{\rm d}t = 0.$$
*$H(f)$&nbsp; is a complex function. The phase response is&nbsp; (see&nbsp; [[Aufgaben:Exercise_1.1Z:_Low-Pass_1st_and_2nd_Order|exercise 1.1Z]]):  
+
*$H(f)$&nbsp; is a complex function. The phase response is&nbsp; (see&nbsp; [[Aufgaben:Exercise_1.1Z:_Low-Pass_Filter_of_1st_and_2nd_Order|Exercise 1.1Z]]):  
 
:$$b(f) = \arctan {f}/{f_{\rm G}}.$$
 
:$$b(f) = \arctan {f}/{f_{\rm G}}.$$
 
*For the frequency&nbsp; $f = f_{\rm G}$&nbsp; one obtains&nbsp; $b(f = f_{\rm G}) = π/4 = 45^\circ$.  
 
*For the frequency&nbsp; $f = f_{\rm G}$&nbsp; one obtains&nbsp; $b(f = f_{\rm G}) = π/4 = 45^\circ$.  

Latest revision as of 18:17, 18 July 2021

Decreasing impulse response

The impulse response  $h(t)$  of an LTI system, which

  • is identically zero for all times  $t < 0$,
  • changes abruptly at time  $t > 0$,  and
  • decreases for  $t > 0$  according to an exponential function:
$$h(t) = {1}/{T} \cdot {\rm e}^{-t/T},$$ was measured.

Let the parameter be  $T = 1 \hspace{0.15cm} \rm ms$.  In the subtask  (3)   the 3dB cut-off frequency  $f_{\rm G}$  is to be determined, which is (implicitly) defined as follows:

$$|H(f = f_{\rm G})| = {1}/{\sqrt{2}} \cdot|H(f = 0)| .$$





Please note:

$$\int_{ 0 }^{ \infty } \frac{1}{1+x^2} \hspace{0.1cm}{\rm d}x = {\pi}/{2} .$$



Questions

1

Compute the frequency response  $H(f)$.  What value is obtained for  $f = 0$?

$H(f = 0) \ = \ $

2

What is the value of the impulse response at time  $t = 0$?

$h(t = 0) \ = \ $

 $\rm 1/s$

3

Compute the 3dB cut-off frequency  $f_{\rm G}$.

$f_{\rm G} \ =\ $

 $\rm Hz$

4

Which of the following statements are true?

The considered system is causal.
The considered system has high-pass filter characteristics.
If a cosine signal of frequency  $f_{\rm G}$  is applied to the system input, the output signal is also cosine-shaped.


Solution

(1)  The frequency response  $H(f)$  is the Fourier transform of  $h(t)$:

$$H(f) = \int_{-\infty}^{+\infty}h(t) \cdot {\rm e}^{\hspace{0.05cm}{-\rm j}2\pi ft}\hspace{0.15cm} {\rm d}t = \frac{1}{T} \cdot \int_{0}^{+\infty} {\rm e}^{\hspace{0.05cm}{-(\rm j}2\pi f+ {1}/{T}) t}\hspace{0.15cm} {\rm d}t.$$
  • Integration leads to the result:
$$H(f) = \left[ \frac{-1/T}{{\rm j}2\pi f+{1}/{T}} \cdot {\rm e}^{\hspace{0.05cm}{-(\rm j}2\pi f+ {1}/{T}) t}\right]_{0}^{\infty}= \frac{1}{1+{\rm j} \cdot 2\pi fT}.$$
  • At frequency  $f = 0$  the frequency response has the value  $H(f = 0) \; \underline{= 1}$.


(2)  This frequency response can also be written with real and imaginary parts as follows:

$$H(f) = \frac{1}{1+(2\pi fT)^2} -{\rm j} \cdot \frac{2\pi fT}{1+(2\pi fT)^2}.$$
  • The impulse response at time  $t = 0$  is equal to the integral over  $H(f)$.
  • Since the imaginary part is odd only the real part has to be integrated over.
  • Using the symmetry property one obtains:
$$h(t=0)=2 \cdot \int_{ 0 }^{ \infty } \frac{1}{1+(2\pi fT)^2} \hspace{0.1cm}{\rm d}f = \frac{1}{\pi T} \cdot \int_{ 0 }^{ \infty } \frac{1}{1+x^2} \hspace{0.1cm}{\rm d}x .$$
  • Using the given definite integral with the result  $π/2$  the following is obtained:
$$h(t=0)= \frac{1}{2 T} \hspace{0.15cm}\underline{= {\rm 500\cdot 1/s}}.$$
  • The result shows that the impulse response at  $t = 0$  is equal to the mean value of the left-hand and right-hand limits.


(3)  The amplitude response in this task or in general with the 3dB cut-off frequency  $f_{\rm G}$ is:

$$|H(f)| = \frac{1}{\sqrt{1+(2\pi fT)^2}} = \frac{1}{\sqrt{1+(f/f_{\rm G})^2}}.$$
  • By comparing the coefficients one obtains:
$$f_{\rm G} = \frac{1}{2\pi T} \hspace{0.15cm}\underline{= {\rm 159 \hspace{0.1cm} Hz}}.$$


(4)  The first statement is correct:

  • Due to  $h(t) = 0$   for  $t < 0$:  The system is indeed causal.  It is a low-pass filter of first order.
  • In contrast, a high-pass filter would have to satisfy the following condition:
$$H(f = 0) = \int_{-\infty}^{+\infty}h(t) \hspace{0.15cm}{\rm d}t = 0.$$
  • $H(f)$  is a complex function. The phase response is  (see  Exercise 1.1Z):
$$b(f) = \arctan {f}/{f_{\rm G}}.$$
  • For the frequency  $f = f_{\rm G}$  one obtains  $b(f = f_{\rm G}) = π/4 = 45^\circ$.
  • If a cosine signal of frequency  $f = f_{\rm G}$  is applied ot the input, the output signal is given by:
$$y(t) = K \cdot \cos( 2 \pi f_{\rm G} t - 45^{\circ}).$$
  • This signal is a harmonic oscillation but not a cosine signal.