Difference between revisions of "Aufgaben:Exercise 3.8Z: Convolution of Two Rectangles"
Line 3: | Line 3: | ||
}} | }} | ||
− | [[File:P_ID535__Sig_Z_3_8.png|right|frame| | + | [[File:P_ID535__Sig_Z_3_8.png|right|frame|For the convolution of two rectangles |
+ | ]] | ||
At the input of a causal LTI system (i.e. linear and time-invariant) with a rectangular impulse response ${h(t)}$ of duration $2 \,\text{ms}$ , a rectangular impulse ${x(t)}$ of duration $T = 3 \,\text{ms}$ and amplitude $A = 2\,\text{ V}$ is applied. The square-wave functions each start at the time $t = 0$. | At the input of a causal LTI system (i.e. linear and time-invariant) with a rectangular impulse response ${h(t)}$ of duration $2 \,\text{ms}$ , a rectangular impulse ${x(t)}$ of duration $T = 3 \,\text{ms}$ and amplitude $A = 2\,\text{ V}$ is applied. The square-wave functions each start at the time $t = 0$. | ||
Line 18: | Line 19: | ||
''Hinweise:'' | ''Hinweise:'' | ||
− | * | + | *This exercise belongs to the chapter [[Signal_Representation/The_Convolution_Theorem_and_Operation|The Convolution Theorem and Operation]]. |
− | * | + | *It mainly refers to the page [[Signal_Representation/The_Convolution_Theorem_and_Operation#Graphical_Convolution|Graphical Convolution]] |
− | * | + | *The topic of this section is also illustrated in the interactive applet [[Applets:Zur_Verdeutlichung_der_grafischen_Faltung|To illustrate the graphical convolution]] veranschaulicht. |
− | === | + | ===Questions=== |
<quiz display=simple> | <quiz display=simple> | ||
− | { | + | {Calculate the signal values at the times $t = 1 \,\text{ms}$ and $t = 2 \,\text{ms}$. |
|type="{}"} | |type="{}"} | ||
$y(t = 1 \,\text{ms})\ = \ $ { 0.6 3% } $\text{V}$ | $y(t = 1 \,\text{ms})\ = \ $ { 0.6 3% } $\text{V}$ | ||
Line 34: | Line 35: | ||
− | { | + | {Determine the signal values for the time points $t = 3 \,\text{ms}$ and $t = 4 \,\text{ms}$ by exploiting the symmetry properties. |
|type="{}"} | |type="{}"} | ||
$y(t = 3 \,\text{ms})\ = \ $ { 1.2 3% } $\text{V}$ | $y(t = 3 \,\text{ms})\ = \ $ { 1.2 3% } $\text{V}$ | ||
Line 40: | Line 41: | ||
− | { | + | {Which of the following statements are true? |
|type="[]"} | |type="[]"} | ||
− | + | + | + The output signal ${y(t)}$ has a trapezoidal shape. |
− | - | + | - The spectrum is: ${Y(f)} = Y_0 \cdot \text{si}^{2}(\pi f T)$. |
− | + | + | + With $T = 2 \,\text{ms}$ , a triangular shape would result. |
Line 50: | Line 51: | ||
</quiz> | </quiz> | ||
− | === | + | ===Solution=== |
{{ML-Kopf}} | {{ML-Kopf}} | ||
[[File:P_ID536__Sig_Z_3_8_a_neu.png|right|frame|Zur Verdeutlichung der grafischen Faltung $x(t) \star h(t)$]] | [[File:P_ID536__Sig_Z_3_8_a_neu.png|right|frame|Zur Verdeutlichung der grafischen Faltung $x(t) \star h(t)$]] | ||
− | '''(1)''' | + | '''(1)''' In general, the following applies to the convolution integral: |
:$$y(t) = \int_{ - \infty }^{ + \infty } {x( \tau ) \cdot h( {t - \tau } )}\hspace{0.1cm} {\rm d}\tau.$$ | :$$y(t) = \int_{ - \infty }^{ + \infty } {x( \tau ) \cdot h( {t - \tau } )}\hspace{0.1cm} {\rm d}\tau.$$ | ||
− | '' | + | ''Hints:'' The abscissas in the graph opposite have been renamed $\tau$ . |
− | + | The signal value at time $t = 1 \,\text{ms}$ ms can be calculated as follows: | |
− | * | + | *Reflection of the impulse response ${h(\tau)}$, |
− | * | + | *shift by $t = 1 \text{ ms}$ to the right (violet curve in the sketch), |
− | * | + | *multiplication of the two functions and integration. |
− | + | The product is also rectangular with the height $2 \text{ V} \cdot 300 \; \text{1/s}$ and width $1 \,\text{ms}$. This results in for the area: | |
:$$y( {t = 1\;{\rm{ms}}} ) \hspace{0.15 cm}\underline{= 0.6\;{\rm{V}}}{\rm{.}}$$ | :$$y( {t = 1\;{\rm{ms}}} ) \hspace{0.15 cm}\underline{= 0.6\;{\rm{V}}}{\rm{.}}$$ | ||
− | + | The green rectangle illustrates the calculation of the second signal value. Now the resulting rectangle is twice as wide after the multiplication and we get: | |
:$$y( {t = 2\;{\rm{ms}}} ) = 2\;{\rm{V}} \cdot {\rm{300}}\;{1}/{{\rm{s}}} \cdot 2\;{\rm{ms}}\hspace{0.15 cm}\underline{={\rm{1.2}}\;{\rm{V}}}{\rm{.}}$$ | :$$y( {t = 2\;{\rm{ms}}} ) = 2\;{\rm{V}} \cdot {\rm{300}}\;{1}/{{\rm{s}}} \cdot 2\;{\rm{ms}}\hspace{0.15 cm}\underline{={\rm{1.2}}\;{\rm{V}}}{\rm{.}}$$ | ||
− | '''(2)''' | + | '''(2)''' Because of the symmetry of ${y(t)}$ with respect to the time $t = 2.5\, \text {ms}$ holds: |
:$$y( {t = 3\;{\rm{ms}}} ) = y( {t = 2\;{\rm{ms}}} ) \hspace{0.15 cm}\underline{= {\rm{1}}{\rm{.2}}\;{\rm{V}}}{\rm{,}}$$ | :$$y( {t = 3\;{\rm{ms}}} ) = y( {t = 2\;{\rm{ms}}} ) \hspace{0.15 cm}\underline{= {\rm{1}}{\rm{.2}}\;{\rm{V}}}{\rm{,}}$$ | ||
:$$y( {t = 4\;{\rm{ms}}} ) = y( {t = 1\;{\rm{ms}}} )\hspace{0.15 cm}\underline{ = 0.6\;{\rm{V}}}{\rm{.}}$$ | :$$y( {t = 4\;{\rm{ms}}} ) = y( {t = 1\;{\rm{ms}}} )\hspace{0.15 cm}\underline{ = 0.6\;{\rm{V}}}{\rm{.}}$$ | ||
− | [[File:P_ID537__Sig_Z_3_8_c.png|right|frame| | + | [[File:P_ID537__Sig_Z_3_8_c.png|right|frame|Convolution result $y(t)$]] |
− | '''(3)''' In | + | '''(3)''' In subtasks '''(1)''' and '''(2)''' the signal values were calculated at discrete time points. |
− | * | + | *All points are to be connected by straight line segments, since the integration over rectangular functions of increasing width results in a linear course. |
− | * | + | *This means: The output signal ${y(t)}$ is trapezoidal. |
− | * | + | *The associated spectrum is complex and reads: |
:$$Y(f) = 6 \cdot 10^{ - 3} \;{{\rm{V}}}/{{{\rm{Hz}}}} \cdot {\mathop{\rm si}\nolimits} ( {2\;{\rm{ms}}\cdot{\rm{\pi }}f} ) \cdot {\mathop{\rm si}\nolimits} ( {3\;{\rm{ms}}\cdot{\rm{\pi }}f}) \cdot {\rm{e}}^{ - {\rm{j \hspace{0.05cm}\cdot \hspace{0.05cm} 2 \hspace{0.05cm}\cdot \hspace{0.05cm}2.5\;{\rm{ms}}\hspace{0.05cm}\cdot \hspace{0.05cm} \pi }}f} .$$ | :$$Y(f) = 6 \cdot 10^{ - 3} \;{{\rm{V}}}/{{{\rm{Hz}}}} \cdot {\mathop{\rm si}\nolimits} ( {2\;{\rm{ms}}\cdot{\rm{\pi }}f} ) \cdot {\mathop{\rm si}\nolimits} ( {3\;{\rm{ms}}\cdot{\rm{\pi }}f}) \cdot {\rm{e}}^{ - {\rm{j \hspace{0.05cm}\cdot \hspace{0.05cm} 2 \hspace{0.05cm}\cdot \hspace{0.05cm}2.5\;{\rm{ms}}\hspace{0.05cm}\cdot \hspace{0.05cm} \pi }}f} .$$ | ||
− | * | + | *If the input pulse ${x(t)}$ had the duration $T = 2\, \text {ms}$, had the duration ${y(t)}$ would show a triangular waveform between ${t = 0}$ and $t = 4 \text { ms}$ . |
− | * | + | *The maximum $1.2 \, \text {V}$ would then only result at the time $t = 2 \, \text {ms}$. |
− | + | .Proposed solutions <u>1 and 3</u> are therefore correct. | |
{{ML-Fuß}} | {{ML-Fuß}} | ||
Revision as of 21:59, 28 January 2021
At the input of a causal LTI system (i.e. linear and time-invariant) with a rectangular impulse response ${h(t)}$ of duration $2 \,\text{ms}$ , a rectangular impulse ${x(t)}$ of duration $T = 3 \,\text{ms}$ and amplitude $A = 2\,\text{ V}$ is applied. The square-wave functions each start at the time $t = 0$.
In this task you are to calculate the output signal ${y(t)}$ with the help of the graphic convolution. As you can easily check, the output signal ${y(t)}$
- differs from zero only in the range from $0$ to $5 \, \text{ms}$ and
- is symmetrical at the time $t = 2.5 \, \text{ms}$.
Hinweise:
- This exercise belongs to the chapter The Convolution Theorem and Operation.
- It mainly refers to the page Graphical Convolution
- The topic of this section is also illustrated in the interactive applet To illustrate the graphical convolution veranschaulicht.
Questions
Solution
(1) In general, the following applies to the convolution integral:
- $$y(t) = \int_{ - \infty }^{ + \infty } {x( \tau ) \cdot h( {t - \tau } )}\hspace{0.1cm} {\rm d}\tau.$$
Hints: The abscissas in the graph opposite have been renamed $\tau$ .
The signal value at time $t = 1 \,\text{ms}$ ms can be calculated as follows:
- Reflection of the impulse response ${h(\tau)}$,
- shift by $t = 1 \text{ ms}$ to the right (violet curve in the sketch),
- multiplication of the two functions and integration.
The product is also rectangular with the height $2 \text{ V} \cdot 300 \; \text{1/s}$ and width $1 \,\text{ms}$. This results in for the area:
- $$y( {t = 1\;{\rm{ms}}} ) \hspace{0.15 cm}\underline{= 0.6\;{\rm{V}}}{\rm{.}}$$
The green rectangle illustrates the calculation of the second signal value. Now the resulting rectangle is twice as wide after the multiplication and we get:
- $$y( {t = 2\;{\rm{ms}}} ) = 2\;{\rm{V}} \cdot {\rm{300}}\;{1}/{{\rm{s}}} \cdot 2\;{\rm{ms}}\hspace{0.15 cm}\underline{={\rm{1.2}}\;{\rm{V}}}{\rm{.}}$$
(2) Because of the symmetry of ${y(t)}$ with respect to the time $t = 2.5\, \text {ms}$ holds:
- $$y( {t = 3\;{\rm{ms}}} ) = y( {t = 2\;{\rm{ms}}} ) \hspace{0.15 cm}\underline{= {\rm{1}}{\rm{.2}}\;{\rm{V}}}{\rm{,}}$$
- $$y( {t = 4\;{\rm{ms}}} ) = y( {t = 1\;{\rm{ms}}} )\hspace{0.15 cm}\underline{ = 0.6\;{\rm{V}}}{\rm{.}}$$
(3) In subtasks (1) and (2) the signal values were calculated at discrete time points.
- All points are to be connected by straight line segments, since the integration over rectangular functions of increasing width results in a linear course.
- This means: The output signal ${y(t)}$ is trapezoidal.
- The associated spectrum is complex and reads:
- $$Y(f) = 6 \cdot 10^{ - 3} \;{{\rm{V}}}/{{{\rm{Hz}}}} \cdot {\mathop{\rm si}\nolimits} ( {2\;{\rm{ms}}\cdot{\rm{\pi }}f} ) \cdot {\mathop{\rm si}\nolimits} ( {3\;{\rm{ms}}\cdot{\rm{\pi }}f}) \cdot {\rm{e}}^{ - {\rm{j \hspace{0.05cm}\cdot \hspace{0.05cm} 2 \hspace{0.05cm}\cdot \hspace{0.05cm}2.5\;{\rm{ms}}\hspace{0.05cm}\cdot \hspace{0.05cm} \pi }}f} .$$
- If the input pulse ${x(t)}$ had the duration $T = 2\, \text {ms}$, had the duration ${y(t)}$ would show a triangular waveform between ${t = 0}$ and $t = 4 \text { ms}$ .
- The maximum $1.2 \, \text {V}$ would then only result at the time $t = 2 \, \text {ms}$.
.Proposed solutions 1 and 3 are therefore correct.