Difference between revisions of "Aufgaben:Exercise 5.2Z: DFT of a Triangular Pulse"
Line 14: | Line 14: | ||
The signal parameters have the following values: | The signal parameters have the following values: | ||
− | * | + | * amplitude $A = 4 \ \text{V}$, |
* equivalent pulse duration $\Delta t = T = 1 \, \text{ms}$. | * equivalent pulse duration $\Delta t = T = 1 \, \text{ms}$. | ||
Line 51: | Line 51: | ||
<quiz display=simple> | <quiz display=simple> | ||
− | { | + | {Give the time coefficients. What are the values of $d(0)$, $d(3)$ and $d(6)$? |
|type="{}"} | |type="{}"} | ||
$d(0)\ = \ $ { 4 3% } $\text{V}$ | $d(0)\ = \ $ { 4 3% } $\text{V}$ | ||
Line 58: | Line 58: | ||
− | { | + | {What is the distance $T_{\rm A}$ between two time samples? |
|type="{}"} | |type="{}"} | ||
$T_{\rm A}\ = \ ${ 0.25 3% } $\text{ms}$ | $T_{\rm A}\ = \ ${ 0.25 3% } $\text{ms}$ | ||
− | { | + | {What is the distance $f_{\rm A}$ between two DFT frequency samples? |
|type="{}"} | |type="{}"} | ||
$f_{\rm A}\ = \ ${ 0.5 3% } $\text{kHz}$ | $f_{\rm A}\ = \ ${ 0.5 3% } $\text{kHz}$ | ||
− | { | + | {Calculate the coefficient $D(0)$ and interpret the result. |
|type="{}"} | |type="{}"} | ||
$D(0)\ = \ $ { 2 3% } $\text{V}$ | $D(0)\ = \ $ { 2 3% } $\text{V}$ | ||
− | { | + | {Calculate the coefficient $D(2)$ and interpret the result, also in terms of the coefficients $D(4)$ and $D(6)$. |
|type="{}"} | |type="{}"} | ||
$D(2)\ = \ ${ 0. } $\text{V}$ | $D(2)\ = \ ${ 0. } $\text{V}$ | ||
− | { | + | {Calculate and interpret the DFT coefficient $D(7)$. |
|type="{}"} | |type="{}"} | ||
$D(7)\ = \ $ { 0.854 3% } $\text{V}$ | $D(7)\ = \ $ { 0.854 3% } $\text{V}$ | ||
Line 88: | Line 88: | ||
===Solution=== | ===Solution=== | ||
{{ML-Kopf}} | {{ML-Kopf}} | ||
− | '''(1)''' | + | '''(1)''' From the graph the following values result with $A = 4 \ {\rm V}$ : |
:$${d(0) = 4\,{\rm V}, \hspace{0.1cm}d(1) = d(7) = 3\,{\rm V}, \hspace{0.1cm} | :$${d(0) = 4\,{\rm V}, \hspace{0.1cm}d(1) = d(7) = 3\,{\rm V}, \hspace{0.1cm} | ||
\hspace{0.1cm}d(2) = d(6) = 2\,{\rm V}, \hspace{0.1cm} | \hspace{0.1cm}d(2) = d(6) = 2\,{\rm V}, \hspace{0.1cm} | ||
Line 98: | Line 98: | ||
− | '''(2)''' | + | '''(2)''' According to the diagram $T_{\rm A} = T/4$. |
− | * | + | *With $T = 1 \ \text{ms}$ one thus obtains $\underline{T_{\rm A} = 0.25 \ \text{ms}}$. |
− | '''(3)''' | + | '''(3)''' For the distances of the samples in the time and frequency domain applies: |
:$$N \cdot f_{\rm A} \cdot T_{\rm A} = 1 \hspace{0.3cm}\Rightarrow \hspace{0.3cm}f_{\rm | :$$N \cdot f_{\rm A} \cdot T_{\rm A} = 1 \hspace{0.3cm}\Rightarrow \hspace{0.3cm}f_{\rm | ||
A}= \frac{1}{ 8 \cdot 0.25\, {\rm ms}}\hspace{0.15 cm}\underline{= 0.5\, {\rm kHz}}\hspace{0.05cm}.$$ | A}= \frac{1}{ 8 \cdot 0.25\, {\rm ms}}\hspace{0.15 cm}\underline{= 0.5\, {\rm kHz}}\hspace{0.05cm}.$$ | ||
− | '''(4)''' | + | '''(4)''' With $N = 8$ and $\mu = 0$ , it follows from the DFT equation: |
:$$D(0) = \frac{1}{8}\cdot \sum_{\nu = 0 }^{7} | :$$D(0) = \frac{1}{8}\cdot \sum_{\nu = 0 }^{7} | ||
d(\nu) = \frac{1\,{\rm V}}{8}\cdot (4+3+2+1+0+1+2+3)\hspace{0.15 cm}\underline{= 2 \,{\rm V}}\hspace{0.05cm}.$$ | d(\nu) = \frac{1\,{\rm V}}{8}\cdot (4+3+2+1+0+1+2+3)\hspace{0.15 cm}\underline{= 2 \,{\rm V}}\hspace{0.05cm}.$$ | ||
− | * | + | *The DFT value $D(0)$ describes the spectral value at $f = 0$, where the following relation holds: |
:$$X(f=0) = \frac{D(0)}{f_{\rm A}}= \frac{ 2\,{\rm V}}{0.5\,{\rm kHz}}= 4 \cdot 10^{-3}\,{\rm V/Hz}\hspace{0.05cm}.$$ | :$$X(f=0) = \frac{D(0)}{f_{\rm A}}= \frac{ 2\,{\rm V}}{0.5\,{\rm kHz}}= 4 \cdot 10^{-3}\,{\rm V/Hz}\hspace{0.05cm}.$$ | ||
− | * | + | *This value agrees with the theoretical value $(A \cdot T)$ . |
− | '''(5)''' | + | '''(5)''' With $N = 8$ and $\mu = 2$ we obtain: |
:$$D(2) = \frac{1}{8}\cdot \sum_{\nu = 0 }^{7} | :$$D(2) = \frac{1}{8}\cdot \sum_{\nu = 0 }^{7} | ||
d(\nu)\cdot {\rm e}^{-{\rm j} \hspace{0.05cm}\cdot \hspace{0.05cm} (\pi /2) \hspace{0.05cm}\cdot \hspace{0.05cm} \nu} = | d(\nu)\cdot {\rm e}^{-{\rm j} \hspace{0.05cm}\cdot \hspace{0.05cm} (\pi /2) \hspace{0.05cm}\cdot \hspace{0.05cm} \nu} = | ||
Line 123: | Line 123: | ||
d(\nu)\cdot (-{\rm j})^{\nu} \hspace{0.3cm} | d(\nu)\cdot (-{\rm j})^{\nu} \hspace{0.3cm} | ||
\Rightarrow \hspace{0.3cm} = \frac{1\,{\rm V}}{8}\cdot (4-3\cdot{\rm j}-2+{\rm j}-{\rm j}-2+3\cdot{\rm j})\hspace{0.15 cm}\underline{= 0}\hspace{0.05cm}.$$ | \Rightarrow \hspace{0.3cm} = \frac{1\,{\rm V}}{8}\cdot (4-3\cdot{\rm j}-2+{\rm j}-{\rm j}-2+3\cdot{\rm j})\hspace{0.15 cm}\underline{= 0}\hspace{0.05cm}.$$ | ||
− | + | This result could have been predicted without calculation: | |
− | * | + | *The DFT coefficients $D(\mu)$ are at the same time the Fourier coefficients of the function $T_{\rm P} = 2T$ periodised at the distance $x_{\rm Per}(t)$. This is shown as a dashed line in the graph on the information page. |
− | * | + | *Due to symmetry properties, however, all even Fourier coefficients of the function $x_{\rm Per}(t)$ are equal to zero: ⇒ $D(4)\hspace{0.15cm}\underline{=0},$ $D(6)\hspace{0.15cm}\underline{=0}$. |
− | '''(6)''' | + | '''(6)''' The coefficient $D(7)$ describes the periodised spectral function at the frequency $f = 7 \cdot f_{\rm A}$. Due to periodicity and symmetry property holds: |
:$$D(7) = D(-1) = D^{\star}(1) \hspace{0.05cm}.$$ | :$$D(7) = D(-1) = D^{\star}(1) \hspace{0.05cm}.$$ | ||
− | + | Preferably, we calculate this DFT coefficient: | |
:$$D(1) = \frac{1}{8}\cdot \sum_{\nu = 0 }^{7} | :$$D(1) = \frac{1}{8}\cdot \sum_{\nu = 0 }^{7} | ||
d(\nu)\cdot {\rm e}^{-{\rm j} \hspace{0.05cm}\cdot \hspace{0.05cm} (\pi /4) \hspace{0.05cm}\cdot \hspace{0.05cm} \nu} = | d(\nu)\cdot {\rm e}^{-{\rm j} \hspace{0.05cm}\cdot \hspace{0.05cm} (\pi /4) \hspace{0.05cm}\cdot \hspace{0.05cm} \nu} = | ||
Line 137: | Line 137: | ||
\frac{-1 + {\rm j}}{\sqrt{2}}-{\rm j}+ 2\cdot {\rm j}+3\cdot \frac{1 - {\rm j}}{\sqrt{2}}\right)$$ | \frac{-1 + {\rm j}}{\sqrt{2}}-{\rm j}+ 2\cdot {\rm j}+3\cdot \frac{1 - {\rm j}}{\sqrt{2}}\right)$$ | ||
:$$\Rightarrow \; \; D(1) = \frac{2 + \sqrt{2}}{4} \approx 0.854{\rm V}\hspace{0.05cm}.$$ | :$$\Rightarrow \; \; D(1) = \frac{2 + \sqrt{2}}{4} \approx 0.854{\rm V}\hspace{0.05cm}.$$ | ||
− | + | Since $D(1)$ is purely real, $D(7) = D(1) \; \underline{= 0.854 \ {\rm V}}$. | |
− | + | This gives for the corresponding values of the continuous spectral function: | |
:$$X(f=-f_{\rm A}) = X(f=+f_{\rm A}) =\frac{D(1)}{f_{\rm A}}= 1.708 \cdot 10^{-3}\,{\rm V/Hz}\hspace{0.05cm}.$$ | :$$X(f=-f_{\rm A}) = X(f=+f_{\rm A}) =\frac{D(1)}{f_{\rm A}}= 1.708 \cdot 10^{-3}\,{\rm V/Hz}\hspace{0.05cm}.$$ | ||
− | * | + | *Because of the implicit periodic continuation by the DFT, the value calculated in this way does not exactly match the actual value $(4 \cdot A \cdot T/\pi^2 = 1.621 · 10^{-3}\text{ V/Hz})$ nicht exakt überein. |
− | * | + | *The relative error is approx. $5.3\%$. |
{{ML-Fuß}} | {{ML-Fuß}} | ||
Revision as of 11:12, 21 March 2021
Consider the sketched triangular momentum
- $$x(t) = \left\{ \begin{array}{l} A \cdot \left( 1 - {|t|}/{T} \right ) \\ \hspace{0.25cm} 0 \\ \end{array} \right.\quad \begin{array}{*{10}c} {\rm{f\ddot{u}r}} \\ {\rm{f\ddot{u}r}} \\ \end{array}\begin{array}{*{10}c} {\left| \hspace{0.005cm} t\hspace{0.05cm} \right| \le T,} \\ {\left|\hspace{0.005cm} t \hspace{0.05cm} \right| > T.} \\ \end{array}$$
The signal parameters have the following values:
- amplitude $A = 4 \ \text{V}$,
- equivalent pulse duration $\Delta t = T = 1 \, \text{ms}$.
The spectrum $X(f)$ is obtained by applying the first Fourier Integral:
- $$X(f) = A \cdot T \cdot {\rm si}^2(\pi f T)\hspace{0.05cm}.$$
The spectral function is now to be approximated by a Discrete Fourier Transform (DFT) with $N = 8$ , where the $N$ coefficients for the time domain ⇒ $d(0)$, ... , $d(7)$ can be taken from the graph.
The corresponding spectral coefficients $D(0)$, ... , $D(7)$ are to be determined, whereby for the indices $\mu = 0$, ... , $N–1$ applies:
- $$D(\mu) = \frac{1}{N} \cdot \sum_{\nu = 0 }^{N-1} d(\nu)\cdot {w}^{\hspace{0.05cm}\nu \hspace{0.05cm} \cdot \hspace{0.05cm}\mu} \hspace{0.05cm}.$$
If we denote the distance between two samples in the time domain by $T_{\rm A}$ and the corresponding frequency distance between two lines by $f_{\rm A}$, the following relationship applies:
- $$N \cdot f_{\rm A} \cdot T_{\rm A} = 1 \hspace{0.05cm}.$$
Hints:
- This task belongs to the chapter Discrete Fourier Transformation (DFT).
- You can check your solutions with the interactive applet Discrete Fourier Transform and Inverse .
Question
Solution
- $${d(0) = 4\,{\rm V}, \hspace{0.1cm}d(1) = d(7) = 3\,{\rm V}, \hspace{0.1cm} \hspace{0.1cm}d(2) = d(6) = 2\,{\rm V}, \hspace{0.1cm} \hspace{0.1cm}d(3) = d(5) = 1\,{\rm V}, \hspace{0.1cm} \hspace{0.1cm}d(4) = 0}\hspace{0.05cm}. $$
- $$\Rightarrow \hspace{0.15 cm}\underline{d(0) = 4\,{\rm V}, \hspace{0.1cm}d(3) = 1\,{\rm V}, \hspace{0.1cm}d(6) = 2\,{\rm V}. \hspace{0.1cm}} \hspace{0.05cm} $$
(2) According to the diagram $T_{\rm A} = T/4$.
- With $T = 1 \ \text{ms}$ one thus obtains $\underline{T_{\rm A} = 0.25 \ \text{ms}}$.
(3) For the distances of the samples in the time and frequency domain applies:
- $$N \cdot f_{\rm A} \cdot T_{\rm A} = 1 \hspace{0.3cm}\Rightarrow \hspace{0.3cm}f_{\rm A}= \frac{1}{ 8 \cdot 0.25\, {\rm ms}}\hspace{0.15 cm}\underline{= 0.5\, {\rm kHz}}\hspace{0.05cm}.$$
(4) With $N = 8$ and $\mu = 0$ , it follows from the DFT equation:
- $$D(0) = \frac{1}{8}\cdot \sum_{\nu = 0 }^{7} d(\nu) = \frac{1\,{\rm V}}{8}\cdot (4+3+2+1+0+1+2+3)\hspace{0.15 cm}\underline{= 2 \,{\rm V}}\hspace{0.05cm}.$$
- The DFT value $D(0)$ describes the spectral value at $f = 0$, where the following relation holds:
- $$X(f=0) = \frac{D(0)}{f_{\rm A}}= \frac{ 2\,{\rm V}}{0.5\,{\rm kHz}}= 4 \cdot 10^{-3}\,{\rm V/Hz}\hspace{0.05cm}.$$
- This value agrees with the theoretical value $(A \cdot T)$ .
(5) With $N = 8$ and $\mu = 2$ we obtain:
- $$D(2) = \frac{1}{8}\cdot \sum_{\nu = 0 }^{7} d(\nu)\cdot {\rm e}^{-{\rm j} \hspace{0.05cm}\cdot \hspace{0.05cm} (\pi /2) \hspace{0.05cm}\cdot \hspace{0.05cm} \nu} = \frac{1}{8}\cdot \sum_{\nu = 0 }^{7} d(\nu)\cdot (-{\rm j})^{\nu} \hspace{0.3cm} \Rightarrow \hspace{0.3cm} = \frac{1\,{\rm V}}{8}\cdot (4-3\cdot{\rm j}-2+{\rm j}-{\rm j}-2+3\cdot{\rm j})\hspace{0.15 cm}\underline{= 0}\hspace{0.05cm}.$$
This result could have been predicted without calculation:
- The DFT coefficients $D(\mu)$ are at the same time the Fourier coefficients of the function $T_{\rm P} = 2T$ periodised at the distance $x_{\rm Per}(t)$. This is shown as a dashed line in the graph on the information page.
- Due to symmetry properties, however, all even Fourier coefficients of the function $x_{\rm Per}(t)$ are equal to zero: ⇒ $D(4)\hspace{0.15cm}\underline{=0},$ $D(6)\hspace{0.15cm}\underline{=0}$.
(6) The coefficient $D(7)$ describes the periodised spectral function at the frequency $f = 7 \cdot f_{\rm A}$. Due to periodicity and symmetry property holds:
- $$D(7) = D(-1) = D^{\star}(1) \hspace{0.05cm}.$$
Preferably, we calculate this DFT coefficient:
- $$D(1) = \frac{1}{8}\cdot \sum_{\nu = 0 }^{7} d(\nu)\cdot {\rm e}^{-{\rm j} \hspace{0.05cm}\cdot \hspace{0.05cm} (\pi /4) \hspace{0.05cm}\cdot \hspace{0.05cm} \nu} = \frac{1\,{\rm V}}{8}\cdot \left(4 +3\cdot \frac{1 - {\rm j}}{\sqrt{2}}-2\cdot {\rm j}+ \frac{-1 - {\rm j}}{\sqrt{2}}-{\rm j}+ \frac{-1 + {\rm j}}{\sqrt{2}}-{\rm j}+ 2\cdot {\rm j}+3\cdot \frac{1 - {\rm j}}{\sqrt{2}}\right)$$
- $$\Rightarrow \; \; D(1) = \frac{2 + \sqrt{2}}{4} \approx 0.854{\rm V}\hspace{0.05cm}.$$
Since $D(1)$ is purely real, $D(7) = D(1) \; \underline{= 0.854 \ {\rm V}}$.
This gives for the corresponding values of the continuous spectral function:
- $$X(f=-f_{\rm A}) = X(f=+f_{\rm A}) =\frac{D(1)}{f_{\rm A}}= 1.708 \cdot 10^{-3}\,{\rm V/Hz}\hspace{0.05cm}.$$
- Because of the implicit periodic continuation by the DFT, the value calculated in this way does not exactly match the actual value $(4 \cdot A \cdot T/\pi^2 = 1.621 · 10^{-3}\text{ V/Hz})$ nicht exakt überein.
- The relative error is approx. $5.3\%$.