Difference between revisions of "Aufgaben:Exercise 1.6Z: Comparison of Rayleigh and Rice"

From LNTwww
Line 78: Line 78:
  
 
===Sample solution===
 
===Sample solution===
{{{ML-Kopf}}
+
{{ML-Kopf}}
'''(1)'''&nbsp; Correct is the <u>solution 2</u>:  
+
'''(1)'''&nbsp; <u>Solution 2</u> is correct:  
*The first suggestion returns a <i>Rayleigh&ndash;fading</i>&ndash;model. With the last setting the result would be
+
*The first suggestion corresponds to a <i>Rayleigh fading</i> model. With the last setting, we would have
 
:$$|z(t)| = {\rm j}  \hspace{0.3cm}\Rightarrow \hspace{0.3cm} r(t) = s(t) \cdot z(t) = {\rm j} \cdot s(t)  
 
:$$|z(t)| = {\rm j}  \hspace{0.3cm}\Rightarrow \hspace{0.3cm} r(t) = s(t) \cdot z(t) = {\rm j} \cdot s(t)  
 
   \hspace{0.05cm}.$$
 
   \hspace{0.05cm}.$$
  
*If we take into account that we are in the equivalent low-pass range, then a cosine input would produce a minus&ndash;sinusoidal output signal $r_{\rm BP}(t)$.  
+
*If we take into account that we are in the equivalent low-pass range, then a cosine input would produce a negative sinusoidal output signal $r_{\rm BP}(t)$.  
 
*On the other hand, solution 2 applies to all possible signals:
 
*On the other hand, solution 2 applies to all possible signals:
$$|z(t)| = x_0 = 1 \hspace{0.3cm}\Rightarrow \hspace{0.3cm} r(t) = s(t)   
+
:$$|z(t)| = x_0 = 1 \hspace{0.3cm}\Rightarrow \hspace{0.3cm} r(t) = s(t)   
 
   \hspace{0.05cm}.$$
 
   \hspace{0.05cm}.$$
  
  
'''(2)'''&nbsp; For the given <i>Rayleigh&ndash;Fading</i> the parameter $\sigma^2 = 0.5$. This results in $z(t)$ for the quadratic mean of the multiplicative factor:
+
'''(2)'''&nbsp; For the given <i>Rayleigh fading</i>, we have $\sigma^2 = 0.5$. For the quadratic mean of the multiplicative factor $z(t)$, this results in:
$${\rm E}\left [ |z(t)|^2 \right ] = 2 \sigma^2 = 1  
+
:$${\rm E}\left [ |z(t)|^2 \right ] = 2 \sigma^2 = 1  
 
   \hspace{0.05cm}.$$
 
   \hspace{0.05cm}.$$
  
The <i>Rice&ndash;Fading</i> should have exactly the same performance. That is, it should apply:
+
The <i>Rice fading</i> should have exactly the same performance. That is, it should apply:
 
$$|z_0|^2 + 2 \sigma^2 = 1  
 
$$|z_0|^2 + 2 \sigma^2 = 1  
 
   \hspace{0.05cm}.$$
 
   \hspace{0.05cm}.$$
Line 103: Line 103:
 
:$$|z_0|^2 \hspace{-0.1cm} \ = \ \hspace{-0.1cm} 0.8 \hspace{0.3cm}\Rightarrow \hspace{0.3cm} |z_0| = 0.894
 
:$$|z_0|^2 \hspace{-0.1cm} \ = \ \hspace{-0.1cm} 0.8 \hspace{0.3cm}\Rightarrow \hspace{0.3cm} |z_0| = 0.894
 
   \hspace{0.05cm}.$$
 
   \hspace{0.05cm}.$$
* The division of $z_0 = x_0 + {\rm j} \cdot y_0$ results from the graph. You can see that $y_0 = x_0$ (center of the cloud in the first quadrant below $45^\circ$):
+
* The phase of $z_0 = x_0 + {\rm j} \cdot y_0$ results from the graph. You can see that $y_0 = x_0$ (center of the cloud in the first quadrant below $45^\circ$):
 
:$$x_0 = y_0 = \frac{|z_0|}{\sqrt{2}}} = \frac{0.894}{\sqrt{2}} \hspace{0.25cm} \underline{ \approx 0.632} \hspace{0.05cm}.$$
 
:$$x_0 = y_0 = \frac{|z_0|}{\sqrt{2}}} = \frac{0.894}{\sqrt{2}} \hspace{0.25cm} \underline{ \approx 0.632} \hspace{0.05cm}.$$
  
Line 109: Line 109:
 
'''(3)'''&nbsp; The range &bdquo;$20 \cdot {\rm lg} \, |z(t)| &#8804; \, &ndash;6 \ \ \rm dB$&rdquo; is equal to &bdquo;$|z(t)|&#8804;0.5$&rdquo;.  
 
'''(3)'''&nbsp; The range &bdquo;$20 \cdot {\rm lg} \, |z(t)| &#8804; \, &ndash;6 \ \ \rm dB$&rdquo; is equal to &bdquo;$|z(t)|&#8804;0.5$&rdquo;.  
 
*This area is marked by the purple circle in the graph on the specifications page.  
 
*This area is marked by the purple circle in the graph on the specifications page.  
*You can see from this that the <u>statement 1 is correct</u>, because with Rayleigh there are more points within the violet circle.
+
*You can see from this that <u>statement 1 is correct</u>, because with Rayleigh there are more points within the violet circle.
  
  
 
[[File:P_ID2136__Mob_Z_1_6c.png|right|frame|Signal Section and WDF $f_a(a)$ for Rayleigh and Rice]]
 
[[File:P_ID2136__Mob_Z_1_6c.png|right|frame|Signal Section and WDF $f_a(a)$ for Rayleigh and Rice]]
  
This graphic shows the result of a system simulation with the program &bdquo;Mobile radio channel&rdquo; from the (former) practical course &bdquo;Simulation of digital transmission systems&rdquo;.  
+
This graph shows the result of a system simulation with the program &bdquo;Mobile radio channel&rdquo; from the (former) practical course &bdquo;Simulation of digital transmission systems&rdquo;.  
*Both from the signal section as well as from the WDF one can see that the blue curve (Rayleigh) has more parts under the violet curve than the red curve (Rice).
+
*Both from the signal section as well as from the PDF one can see that the blue curve (Rayleigh) has more parts under the violet curve than the red curve (Rice).
 
<br clear=all>
 
<br clear=all>
 
'''(4)'''&nbsp; Correct is <u>solution 3</u>:  
 
'''(4)'''&nbsp; Correct is <u>solution 3</u>:  
*For the Rayleigh distribution the probability
+
*For the Rayleigh distribution, the requested probability is
$$${\rm Pr}(20 \cdot {\rm lg}\hspace{0.15cm} a(t) \le 0\,\,{\rm dB}) = {\rm Pr}(a(t) \le 1) = 1 - {\rm e}^{-1} \approx 63\,\,\
+
$${\rm Pr}(20 \cdot {\rm lg}\hspace{0.15cm} a(t) \le 0\,\,{\rm dB}) = {\rm Pr}(a(t) \le 1) = 1 - {\rm e}^{-1} \approx 63\,\,\
 
   \hspace{0.05cm}.$$
 
   \hspace{0.05cm}.$$
  
*From the graph you can see that the probability for the riceversion (with the selected parameters) is about the same as the probability of falling below.  
+
*From the graph you can see that the probability for the Rice version (with the selected parameters) is about the same as the probability of falling below.  
 
*This result can also be guessed from the complex representation of $z(t)$ on the data page (easier if you already know the result).
 
*This result can also be guessed from the complex representation of $z(t)$ on the data page (easier if you already know the result).
 
* Among other things, because the tip of the Gaussian cloud is still within the green circle.
 
* Among other things, because the tip of the Gaussian cloud is still within the green circle.
Line 128: Line 128:
  
 
[[File:P_ID2137__Mob_Z_1_6e.png|right|frame|Complex receive signal $r(t)$ for Rayleigh and Rice]]
 
[[File:P_ID2137__Mob_Z_1_6e.png|right|frame|Complex receive signal $r(t)$ for Rayleigh and Rice]]
'''(5)''''&nbsp; Correct are the <u>solution proposals 2 and 3</u>:
+
'''(5)''' <u>Solutions 2 and 3</u> are correct:
* At <i>Rice&ndash;Fading</i> the point cloud of $z(t)$ is in the first quadrant. If you multiply $z(t)$ by $s(t) = &plusmn;1$, you get two point clouds in the first and third quadrant. This does not change the WDF $f_a(a)$ of the amount.
+
* With <i>Rice fading</i>, the point cloud of $z(t)$ is in the first quadrant. If you multiply $z(t)$ by $s(t) = &plusmn;1$, you get two point clouds in the first and third quadrant. This does not change the PDF $f_a(a)$ of the magnitude.
* Even with <i>Rayleigh&ndash;Fading</i> the density functions $f_a(a)$ of the amount for $|z(t)|$ and $|r(t)|$ do not show any differences. Since the phase $\phi$ is equally distributed, the final result also has the same point clouds.
+
* Also with <i>Rayleigh fading</i>, the density functions $f_a(a)$ of the magnitudes of $|z(t)|$ and $|r(t)|$ do not show any differences. Since the phase $\phi$ is equally distributed, the final result also has the same point clouds.
 
*However, if you look at the development of the complex representation of $z(t)$ and $r(t)$ dynamically, there are indeed differences.  
 
*However, if you look at the development of the complex representation of $z(t)$ and $r(t)$ dynamically, there are indeed differences.  
 
*Larger jumps occur in the complex representation of $r(t)$, whenever there are phase jumps by $&plusmn;180^\circ$ in the transmitted signal $s(t)$, i.e. when changing symbols.  
 
*Larger jumps occur in the complex representation of $r(t)$, whenever there are phase jumps by $&plusmn;180^\circ$ in the transmitted signal $s(t)$, i.e. when changing symbols.  
*Thus, ${\it \Phi}_z(f_{\rm D})$ and ${\it \Phi}_r(f_{\rm D})$ &ndash are different for Rice&ndash;Fading; the latter is wider &ndash; and accordingly the corresponding autocorrelation function.
+
*Thus, ${\it \Phi}_z(f_{\rm D})$ and ${\it \Phi}_r(f_{\rm D})$ are different for Rice fading (the latter is wider) and accordingly the corresponding autocorrelation function.
  
 
{{ML-Fuß}}
 
{{ML-Fuß}}
 
Translated with www.DeepL.com/Translator (free version)
 
  
  
 
[[Category:Exercises for Mobile Communications|^1.4 Fading with Direct Path Component^]]
 
[[Category:Exercises for Mobile Communications|^1.4 Fading with Direct Path Component^]]

Revision as of 11:23, 15 April 2020

Phasendiagramm des Faktors  $z(t) = x(t) + {\rm j} \cdot y(t)$ 
bei Rayleigh und Rice

In this task Rayleigh fading and Rice fading are to be compared with each other.

The graph shows the complex factor  $z(t) = x(t) + {\rm j} \cdot y(t)$  in the complex plane For the low-pass transmit signal  $s(t) = 1$ (which with respect to a bandpass–system corresponds to a cosine oscillation with amplitude  $1$ ), the low-pass receive signal  $r(t)$  is $z(t)$.

  • The upper diagram describes  Rayleigh fading, where the component signals  $x(t)$  and  $y(t)$  are each Gaussian distributed with variance  $\sigma^2$. For  $a ≥ 0$, the probability density function of the magnitude  $a(t) = |z(t)|$  is:
$$f_a(a) = \frac{a}{\sigma^2} \cdot {\rm exp} [ -\frac{a^2 }{2\sigma^2}] \hspace{0.05cm}.$$
The noncentral second moment of  $z(t)$  is  $1$:
$${\rm E}\left [ |z(t)|^2 \right ] = 2 \sigma^2 = 1 \hspace{0.3cm} \Rightarrow \hspace{0.3cm} \sigma = {1}/{\sqrt{2}} \approx 0.707 \hspace{0.05cm}.$$
  • The lower phase diagram is the result of  Rice fading. Here, too,   $x(t)$  and  $y(t)$  are Gaussian distributed with variance  $\sigma^2$, but now with mean value  $x_0$  and  $y_0$. The PDF for  $a ≥ 0$   is
$$f_a(a) = \frac{a}{\sigma^2} \cdot {\rm exp} \left[ -\frac{a^2 + |z_0|^2}{2\sigma^2}\right] \cdot {\rm I}_0 \left [ \frac{a \cdot |z_0|}{\sigma^2} \right ]\hspace{0.05cm}$$

where ${\rm I}_0$ is the modified Bessel function of the first kind.

The root mean square now includes the direct component  $z_0 = x_0 + {\rm j} \cdot y_0$

$${\rm E}\left [ |z(t)|^2 \right ] = 2 \cdot \sigma^2 + |z_0|^2 \hspace{0.05cm}.$$

For the system comparison

  • the second moment is assumed to be constant: ${\rm E}\big[|z(t)|^2\big] = 1$,
  • the Rice fading is based on the direction shown in the graph,
  • let the power be split between the direct path  $(|z_0|^2)$  and the scattering paths  $(2\sigma^2)$  in the ratio  $4:1$ .


For the subtasks (1) to (4), let $s(t) = 1$. For the subtasks (5) and (6), a BPSK signal is assumed . The low-pass signal  $s(t)$  thus has a rectangular shape with the possible values  $±1$. The duration of each rectangular pulse is  $T = 10 \ \rm ms$.




Notes:



Questionnaire

1

When does the Rice model result in an ideal channel   ⇒   $H(f) = 1$?

With  $x_0 = y_0 = 0, \ \ \sigma^2 = 1$.
With  $x_0 = 1, \ \ y_0 = 0, \ \ \ \sigma^2 = 0$.
With  $x_0 = 0, \ \ \ y_0 = 1, \ \ \ \sigma^2 = 0$.

2

Determine the Rice parameters using the given assumptions and the graph.

$\sigma \ = \ $

$x_0 \ = \ $

$y_0 \ = \ $

3

For which channel is  ${\rm Pr}(20 \cdot {\rm lg} \, |z(t)| ≤ -6 \ \ \rm dB)$  larger?

The Rayleigh channel
The Rice channel.
The probabilities are approximately equal.

4

For which channel is ${\rm Pr}(20 \cdot {\rm lg} \, |z(t)| ≤ 0 \ \ \rm dB)$  larger?

The Rayleigh channel
The Rice channel.
The probabilities are approximately equal.

5

Which statements apply to a BPSK transmit signal  $s(t)$  when considering the complex representation of the receive signal  $r(t)$ ?

Rayleigh fading causes point clouds in quadrants  $1$  and  $3$.
Rice fading causes point clouds in quadrants  $1$  and  $3$.
For Rayleigh, the PDF of  $|r(t)|$  is equal to the PDF of  $|z(t)|$.
For Rice, the PDF of  $|r(t)|$  is equal to the PDF of  $|z(t)|$.


Sample solution

(1)  Solution 2 is correct:

  • The first suggestion corresponds to a Rayleigh fading model. With the last setting, we would have
$$|z(t)| = {\rm j} \hspace{0.3cm}\Rightarrow \hspace{0.3cm} r(t) = s(t) \cdot z(t) = {\rm j} \cdot s(t) \hspace{0.05cm}.$$
  • If we take into account that we are in the equivalent low-pass range, then a cosine input would produce a negative sinusoidal output signal $r_{\rm BP}(t)$.
  • On the other hand, solution 2 applies to all possible signals:
$$|z(t)| = x_0 = 1 \hspace{0.3cm}\Rightarrow \hspace{0.3cm} r(t) = s(t) \hspace{0.05cm}.$$


(2)  For the given Rayleigh fading, we have $\sigma^2 = 0.5$. For the quadratic mean of the multiplicative factor $z(t)$, this results in:

$${\rm E}\left [ |z(t)|^2 \right ] = 2 \sigma^2 = 1 \hspace{0.05cm}.$$

The Rice fading should have exactly the same performance. That is, it should apply: $$|z_0|^2 + 2 \sigma^2 = 1 \hspace{0.05cm}.$$

Furthermore, it was requested:

  • The ratio of the power of the deterministic part ($|z_0|^2$) and the stochastic part ($2\sigma^2$) is $4$. It follows from this:
$$2 \sigma^2 \hspace{-0.1cm} \ = \ \hspace{-0.1cm} 0.2 \hspace{0.3cm}\Rightarrow \hspace{0.3cm} \sigma^2 = 0.1 \hspace{0.3cm}\Rightarrow \hspace{0.3cm} \sigma = \frac{1}{\sqrt{10}} \hspace{0.25cm} \underline{ \approx 0.316} \hspace{0.05cm},$$
$$|z_0|^2 \hspace{-0.1cm} \ = \ \hspace{-0.1cm} 0.8 \hspace{0.3cm}\Rightarrow \hspace{0.3cm} |z_0| = 0.894 \hspace{0.05cm}.$$
  • The phase of $z_0 = x_0 + {\rm j} \cdot y_0$ results from the graph. You can see that $y_0 = x_0$ (center of the cloud in the first quadrant below $45^\circ$):
$$x_0 = y_0 = \frac{|z_0|}{\sqrt{2}}} = \frac{0.894}{\sqrt{2}} \hspace{0.25cm} \underline{ \approx 0.632} \hspace{0.05cm}.$$


(3)  The range „$20 \cdot {\rm lg} \, |z(t)| ≤ \, –6 \ \ \rm dB$” is equal to „$|z(t)|≤0.5$”.

  • This area is marked by the purple circle in the graph on the specifications page.
  • You can see from this that statement 1 is correct, because with Rayleigh there are more points within the violet circle.


Signal Section and WDF $f_a(a)$ for Rayleigh and Rice

This graph shows the result of a system simulation with the program „Mobile radio channel” from the (former) practical course „Simulation of digital transmission systems”.

  • Both from the signal section as well as from the PDF one can see that the blue curve (Rayleigh) has more parts under the violet curve than the red curve (Rice).


(4)  Correct is solution 3:

  • For the Rayleigh distribution, the requested probability is

$${\rm Pr}(20 \cdot {\rm lg}\hspace{0.15cm} a(t) \le 0\,\,{\rm dB}) = {\rm Pr}(a(t) \le 1) = 1 - {\rm e}^{-1} \approx 63\,\,\ \hspace{0.05cm}.$$

  • From the graph you can see that the probability for the Rice version (with the selected parameters) is about the same as the probability of falling below.
  • This result can also be guessed from the complex representation of $z(t)$ on the data page (easier if you already know the result).
  • Among other things, because the tip of the Gaussian cloud is still within the green circle.


Complex receive signal $r(t)$ for Rayleigh and Rice

(5) Solutions 2 and 3 are correct:

  • With Rice fading, the point cloud of $z(t)$ is in the first quadrant. If you multiply $z(t)$ by $s(t) = ±1$, you get two point clouds in the first and third quadrant. This does not change the PDF $f_a(a)$ of the magnitude.
  • Also with Rayleigh fading, the density functions $f_a(a)$ of the magnitudes of $|z(t)|$ and $|r(t)|$ do not show any differences. Since the phase $\phi$ is equally distributed, the final result also has the same point clouds.
  • However, if you look at the development of the complex representation of $z(t)$ and $r(t)$ dynamically, there are indeed differences.
  • Larger jumps occur in the complex representation of $r(t)$, whenever there are phase jumps by $±180^\circ$ in the transmitted signal $s(t)$, i.e. when changing symbols.
  • Thus, ${\it \Phi}_z(f_{\rm D})$ and ${\it \Phi}_r(f_{\rm D})$ are different for Rice fading (the latter is wider) and accordingly the corresponding autocorrelation function.