Loading [MathJax]/jax/output/HTML-CSS/fonts/TeX/fontdata.js

Difference between revisions of "Aufgaben:Exercise 3.7Z: Rectangular Signal with Echo"

From LNTwww
m (Text replacement - "Category:Exercises for Signal Representation" to "Category:Signal Representation: Exercises")
Line 96: Line 96:
  
 
__NOEDITSECTION__
 
__NOEDITSECTION__
[[Category:Exercises for Signal Representation|^3.4 The Convolution Theorem^]]
+
[[Category:Signal Representation: Exercises|^3.4 The Convolution Theorem^]]

Revision as of 14:39, 23 March 2021

Transmit signal s(t) & signal r(t) with echo

We consider a periodic square wave signal  s(t)  with the possible amplitude values  0 V  and  2 V  and the period duration  T0=T=1 ms. At the jump points, for example at  t=T/4, the signal value is  1 V. The DC component (also i.e. the Fourier coefficient  A0)  of the signal is also  1 V.

Further applies:

  • Due to symmetry (even function), all sine coefficients  Bn=0.
  • The coefficients  An  with even  n  are also zero.
  • For odd values of  n  on the other hand, the following applies:
An=(1)(n1)/24Vnπ.

The signal  s(t)  reaches the receiver via two paths (see sketch below):

  • Once on the direct path and secondly via a secondary path.
  • The latter is characterised by the attenuation factor  α  and the transit time  τ .
  • Therefore, the following applies to the received signal:

r(t)=s(t)+αs(tτ). The frequency response of the channel is  H(f)=R(f)/S(f), the impulse response is denoted by  h(t) .





Hints:


Questions

1

Which statements are true regarding the impulse response  h(t) ?

For  0t<τ   h(t)=1 is true, for  t>τ    h(t)=1+α.
It holds that  h(t)=δ(t)+αδ(tτ).
h(t)  has a gaussian shape.

2

Calculate the signal  r(t)  for the channel parameters  α=0.5  and  τ=T/4.
What values result at the given times?

r(t=0.2T) = 

 V
r(t=0.3T) = 

 V

3

Calculate the signal  r(t)  with  α=1  and  τ=T/2. Interpret the result in the frequency domain.
What value results for  t=T/2?

r(t=T/2) = 

 V


Solution

(1)  The second suggested solution is correct:

  • The impulse response is equal to the received signal  r(t), if a single Dirac impulse is present at the input at time  t=0 :
h(t)=δ(t)+αδ(tτ).


Convolution of square wave signal  s(t)  and impulse response  h(t)

(2)  It holds that  r(t)=s(t)h(t). This convolution operation is most easily performed graphically:

The values of the received signal are generally:

  • 0.00<t/T<0.25:r(t)=+1 V,
  • 0.25<t/T<0.50:r(t)=1 V,
  • 0.50<t/T<0.75:r(t)=0 V,
  • 0.75<t/T<1.00:r(t)=+2 V.


The values we are looking for are thus

r(t=0.2T)=+1 V_,
r(t=0.3·T)=1 V_.


(3)  Using a similar procedure as in (2) , a DC signal of 2 V is obtained for r(t) :

  • The gaps in the signal s(t) are completely filled by the echo s(tT/2).
  • This result can also be derived in the frequency domain.
  • The channel frequency response is with α=1 and τ=T/2:
H(f)=1+1ejπfT=1+cos(πfT)jsin(πfT).
  • Apart from the DC component, the input signal s(t) only has components at f=f0=1/T, f=3f0, f=5f0 etc..
  • At these frequencies, however, both the real– and the imaginary part of H(f) are equal to zero.
  • Thus, for the output spectrum with A0=1 V and H(f=0)=2 we obtain:
R(f)=A0H(f=0)δ(f)=2Vδ(f).

The inverse Fourier transformation thus also yields r(t)=2 V= const_.