Difference between revisions of "Aufgaben:Exercise 1.1: ISDN Supply Lines"
From LNTwww
(Die Seite wurde neu angelegt: „ {{quiz-Header|Buchseite=Beispiele von Nachrichtensystemen/Allgemeine Beschreibung von ISDN }} [[File:|right|]] ===Fragebogen=== <quiz display=simple> {Mu…“) |
|||
| (24 intermediate revisions by 7 users not shown) | |||
| Line 1: | Line 1: | ||
| − | {{quiz-Header|Buchseite= | + | {{quiz-Header|Buchseite=Examples_of_Communication_Systems/General_Description_of_ISDN |
}} | }} | ||
| + | [[File:EN_Bei_A_1_1.png|right|frame|Main bundle, basic bundle, and star quad]] | ||
| + | In ISDN ("Integrated Services Digital Network") the final branch (near the subscriber) is connected to a "local exchange" $\rm (LE)$ by a copper twisted pair, whereby two twisted pairs are twisted into a so-called "star quad". Several such star quads are then combined to form a "basic bundle", and several basic bundles are combined to form a "main bundle" (see graphic). | ||
| − | [[ | + | In the network of "Deutsche Telekom" (formerly: "Deutsche Bundespost"), mostly copper lines with $0.4$ mm core diameter are found, for whose attenuation and phase function the following equations are given in '''[PW95]''': |
| + | :$$\frac{a_{\rm K}(f)}{\rm dB} = \left [ 5.1 + 14.3 \cdot \left (\frac{f}{\rm MHz}\right )^{0.59}\right ]\cdot\frac{l}{\rm km} | ||
| + | \hspace{0.05cm},$$ | ||
| + | :$$\frac{b_{\rm K}(f)}{\rm rad} = \left [ 32.9 \cdot \frac{f}{\rm MHz} + 2.26 \cdot \left (\frac{f}{\rm MHz}\right )^{0.5}\right ]\cdot\frac{l}{\rm km} \hspace{0.05cm}.$$ | ||
| + | Here $l$ denotes the cable length. | ||
| − | |||
| + | |||
| + | |||
| + | <u>Notes:</u> | ||
| + | *The exercise belongs to the chapter [[Examples_of_Communication_Systems/General_Description_of_ISDN|"General Description of ISDN"]]. | ||
| + | |||
| + | *In particular, reference is made to the section [[Examples_of_Communication_Systems/General_Description_of_ISDN#Network_infrastructure_for_ISDN|"Network infrastructure for ISDN"]]. | ||
| + | |||
| + | *Further information on the attenuation of copper lines can be found in the chapter "Properties of Electrical Cables" of the book [[Lineare zeitinvariante Systeme|"Linear and Time Invariant Systems"]]. | ||
| + | |||
| + | *'''[PW95]''' refers to the following (German language) publication: Pollakowski, P.; Wellhausen, H.-W.: Eigenschaften symmetrischer Ortsanschlusskabel im Frequenzbereich bis 30 MHz. Deutsche Telekom AG, Forschungs- und Technologiezentrum Darmstadt, 1995. | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | ===Questions=== | ||
<quiz display=simple> | <quiz display=simple> | ||
| − | { | + | |
| + | {How many subscribers $(N)$ can be connected to an ISDN local exchange through the main cable shown? | ||
| + | |type="{}"} | ||
| + | $N \ = \ $ { 50 3% } | ||
| + | |||
| + | {What are the consequences of two-wire transmission? | ||
|type="[]"} | |type="[]"} | ||
| − | + | + The two transmission directions interfere with each other. | |
| − | + | + | + Crosstalk noise may occur. |
| + | - Intersymbol interference occurs. | ||
| + | {A DC signal is attenuated by a factor of $4$. What is the cable length $l$ ? | ||
| + | |type="{}"} | ||
| + | $l \ = \ $ { 2.36 3% } $\ \rm km$ | ||
| − | { | + | {Which attenuation and phase value results from this for the frequency $f = 120 \ \rm kHz$ ? |
|type="{}"} | |type="{}"} | ||
| − | $\ | + | $a_{\rm K}(f = 120 \ \rm kHz) \ = \ $ { 21.7 3% } $\ \rm dB$ |
| + | $b_{\rm K}(f = 120 \ \rm kHz) \ = \ $ { 11.2 3% } $\ \rm rad$ | ||
| + | |||
| + | </quiz> | ||
| + | |||
| + | ===Solution=== | ||
| + | {{ML-Kopf}} | ||
| + | '''(1)''' Two-wire transmission is used in the connection area. The possible connections are equal to the number of pairs in the main cable: | ||
| + | :$$\underline{N = 50}.$$ | ||
| + | |||
| + | '''(2)''' <u>Solutions 1 and 2</u> are correct: | ||
| + | *Two-wire transmission requires a directional separation method, namely the so-called "fork circuit". This has the task that at receiver $\rm A$ only the transmitted signal of subscriber $\rm B$ arrives, but not the own transmitted signal. This is generally quite successful with narrowband signals – for example, speech – but not completely. | ||
| + | |||
| + | *Due to inductive and capacitive couplings, crosstalk can occur from the twin wire located in the same star quad, whereby "near-end crosstalk" $($i.e. the interfering transmitter and the interfered receiver are located together$)$ leads to greater impairments than "far-end crosstalk". | ||
| + | |||
| + | *On the other hand, the last solution is not applicable. Intersymbol interference – i.e. the mutual interference of neighboring symbols – can certainly occur, but it is not related to two-wire transmission. The reason for this are rather (linear) distortions due to the specific attenuation and phase curves. | ||
| + | |||
| + | |||
| + | |||
| + | '''(3)''' The DC signal attenuation by a factor of $4$ can be expressed as follows: | ||
| + | :$$a_{\rm K}(f = 0) = 20 \cdot {\rm lg}\,\,(4) = 12.04\,{\rm dB}\hspace{0.05cm}.$$ | ||
| + | *With the given coefficient $\text{5.1 dB/km}$, this gives the cable length $l = 12.04/5.1\hspace{0.15cm}\underline{ = 2.36 \ \rm km}$. | ||
| − | |||
| − | === | + | '''(4)''' Using the given equations and $ l = 2.36 \ \rm km$, we obtain: |
| − | {{ | + | :$$a_{\rm K}(f = 120\,{\rm kHz})= (5.1 + 14.3 \cdot 0.12^{\hspace{0.05cm}0.59}) \cdot 2.36\,{\rm dB} \hspace{0.15cm}\underline{\approx 21.7\,{\rm dB}}\hspace{0.05cm},$$ |
| − | + | :$$b_{\rm K}(f = 120\,{\rm kHz}) = (32.9 \cdot 0.12 + 2.26 \cdot 0.12^{\hspace{0.05cm}0.5}) \cdot 2.36\,{\rm rad}\hspace{0.15cm}\underline{ \approx 11.2\,{\rm rad}}\hspace{0.05cm}.$$ | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
{{ML-Fuß}} | {{ML-Fuß}} | ||
| − | + | [[Category:Examples of Communication Systems: Exercises|^1.1 General Description of ISDN^]] | |
| − | [[Category: | ||
Latest revision as of 16:18, 26 October 2022
Main bundle, basic bundle, and star quad
In ISDN ("Integrated Services Digital Network") the final branch (near the subscriber) is connected to a "local exchange" $\rm (LE)$ by a copper twisted pair, whereby two twisted pairs are twisted into a so-called "star quad". Several such star quads are then combined to form a "basic bundle", and several basic bundles are combined to form a "main bundle" (see graphic).
In the network of "Deutsche Telekom" (formerly: "Deutsche Bundespost"), mostly copper lines with $0.4$ mm core diameter are found, for whose attenuation and phase function the following equations are given in [PW95]:
- $$\frac{a_{\rm K}(f)}{\rm dB} = \left [ 5.1 + 14.3 \cdot \left (\frac{f}{\rm MHz}\right )^{0.59}\right ]\cdot\frac{l}{\rm km} \hspace{0.05cm},$$
- $$\frac{b_{\rm K}(f)}{\rm rad} = \left [ 32.9 \cdot \frac{f}{\rm MHz} + 2.26 \cdot \left (\frac{f}{\rm MHz}\right )^{0.5}\right ]\cdot\frac{l}{\rm km} \hspace{0.05cm}.$$
Here $l$ denotes the cable length.
Notes:
- The exercise belongs to the chapter "General Description of ISDN".
- In particular, reference is made to the section "Network infrastructure for ISDN".
- Further information on the attenuation of copper lines can be found in the chapter "Properties of Electrical Cables" of the book "Linear and Time Invariant Systems".
- [PW95] refers to the following (German language) publication: Pollakowski, P.; Wellhausen, H.-W.: Eigenschaften symmetrischer Ortsanschlusskabel im Frequenzbereich bis 30 MHz. Deutsche Telekom AG, Forschungs- und Technologiezentrum Darmstadt, 1995.
Questions
Solution
(1) Two-wire transmission is used in the connection area. The possible connections are equal to the number of pairs in the main cable:
- $$\underline{N = 50}.$$
(2) Solutions 1 and 2 are correct:
- Two-wire transmission requires a directional separation method, namely the so-called "fork circuit". This has the task that at receiver $\rm A$ only the transmitted signal of subscriber $\rm B$ arrives, but not the own transmitted signal. This is generally quite successful with narrowband signals – for example, speech – but not completely.
- Due to inductive and capacitive couplings, crosstalk can occur from the twin wire located in the same star quad, whereby "near-end crosstalk" $($i.e. the interfering transmitter and the interfered receiver are located together$)$ leads to greater impairments than "far-end crosstalk".
- On the other hand, the last solution is not applicable. Intersymbol interference – i.e. the mutual interference of neighboring symbols – can certainly occur, but it is not related to two-wire transmission. The reason for this are rather (linear) distortions due to the specific attenuation and phase curves.
(3) The DC signal attenuation by a factor of $4$ can be expressed as follows:
- $$a_{\rm K}(f = 0) = 20 \cdot {\rm lg}\,\,(4) = 12.04\,{\rm dB}\hspace{0.05cm}.$$
- With the given coefficient $\text{5.1 dB/km}$, this gives the cable length $l = 12.04/5.1\hspace{0.15cm}\underline{ = 2.36 \ \rm km}$.
(4) Using the given equations and $ l = 2.36 \ \rm km$, we obtain:
- $$a_{\rm K}(f = 120\,{\rm kHz})= (5.1 + 14.3 \cdot 0.12^{\hspace{0.05cm}0.59}) \cdot 2.36\,{\rm dB} \hspace{0.15cm}\underline{\approx 21.7\,{\rm dB}}\hspace{0.05cm},$$
- $$b_{\rm K}(f = 120\,{\rm kHz}) = (32.9 \cdot 0.12 + 2.26 \cdot 0.12^{\hspace{0.05cm}0.5}) \cdot 2.36\,{\rm rad}\hspace{0.15cm}\underline{ \approx 11.2\,{\rm rad}}\hspace{0.05cm}.$$
