Difference between revisions of "Aufgaben:Exercise 1.2Z: Measurement of the Frequency Response"
From LNTwww
| Line 4: | Line 4: | ||
[[File:P_ID788__LZI_Z_1_2.png |right|Measured signal amplitudes <br>and phases for filter $\rm B$|frame]] | [[File:P_ID788__LZI_Z_1_2.png |right|Measured signal amplitudes <br>and phases for filter $\rm B$|frame]] | ||
| − | + | For the metrological determination of the filter frequency response, a sinusoidal input signal with an amplitude of $2 \hspace{0.05cm} \text{V}$ and given frequency $f_0$ is applied. The output signal $y(t)$ or its spectrum $Y(f)$ are then determined according to magnitude and phase. | |
| − | * | + | *The magnitude spectrum at the output of filter $\rm A$ with frequency $f_0 = 1 \ \text{kHz}$ is: |
:$$|Y_{\rm A} (f)| = 1.6\hspace{0.05cm}{\rm V} \cdot {\rm \delta } (f | :$$|Y_{\rm A} (f)| = 1.6\hspace{0.05cm}{\rm V} \cdot {\rm \delta } (f | ||
\pm f_0) + 0.4\hspace{0.05cm}{\rm V} \cdot {\rm \delta } (f \pm 3 f_0) .$$ | \pm f_0) + 0.4\hspace{0.05cm}{\rm V} \cdot {\rm \delta } (f \pm 3 f_0) .$$ | ||
| − | * | + | *For another filter $\rm B$ on the other hand, is always a harmonic oscillation with the (single) frequency $f_0$. For the frequencies $f_0$ given in the table the amplitudes $A_y(f_0)$ and the phases $φ_y(f_0)$ are measured. Here, the following holds: |
:$$Y_{\rm B} (f) = {A_y}/{2} \cdot {\rm e}^{ {\rm j} \varphi_y} | :$$Y_{\rm B} (f) = {A_y}/{2} \cdot {\rm e}^{ {\rm j} \varphi_y} | ||
\cdot {\rm \delta } (f + f_0) + {A_y}/{2} \cdot {\rm e}^{ | \cdot {\rm \delta } (f + f_0) + {A_y}/{2} \cdot {\rm e}^{ | ||
-{\rm j} \varphi_y} \cdot {\rm \delta } (f - f_0).$$ | -{\rm j} \varphi_y} \cdot {\rm \delta } (f - f_0).$$ | ||
| − | + | In the task, filter $\rm B$ should be given in the form:$$H_{\rm B}(f) = {\rm e}^{-a_{\rm B}(f)}\cdot {\rm e}^{-{\rm j} | |
| − | :$$H_{\rm B}(f) = {\rm e}^{-a_{\rm B}(f)}\cdot {\rm e}^{-{\rm j} | + | \hspace{0.05cm} \cdot \hspace{0.05cm} b_{\rm B}(f)}$$. |
| − | \hspace{0.05cm} \cdot \hspace{0.05cm} b_{\rm B}(f)}$$ | ||
| − | + | Here, | |
| − | *$a_{\rm B}(f)$ | + | *$a_{\rm B}(f)$ denotes the damping curve, and |
| − | *$b_{\rm B}(f)$ | + | *$b_{\rm B}(f)$ the phse response. |
| Line 35: | Line 34: | ||
<quiz display=simple> | <quiz display=simple> | ||
| − | { | + | {Which of the statements are true regarding filter $\rm A$ ? |
|type="[]"} | |type="[]"} | ||
| − | - | + | - The following holds: $|H(f)| = 0.8$. |
| − | + | + | + Filter $\rm A$ does not represent an LTI–system. |
| − | + | + | + The specification of a frequency response is not possible. |
| − | { | + | {Which of the statements are true regarding filter $\rm B$ ? |
|type="()"} | |type="()"} | ||
| − | - Filter $\rm B$ | + | - Filter $\rm B$ is a low-pass filter. |
| − | - Filter $\rm B$ | + | - Filter $\rm B$ is a high-pass filter. |
| − | + Filter $\rm B$ | + | + Filter $\rm B$ is a band-pass filter. |
| − | - Filter $\rm B$ | + | - Filter $\rm B$ is a band-stop filter. |
Revision as of 02:11, 29 June 2021
Measured signal amplitudes
and phases for filter $\rm B$
and phases for filter $\rm B$
For the metrological determination of the filter frequency response, a sinusoidal input signal with an amplitude of $2 \hspace{0.05cm} \text{V}$ and given frequency $f_0$ is applied. The output signal $y(t)$ or its spectrum $Y(f)$ are then determined according to magnitude and phase.
- The magnitude spectrum at the output of filter $\rm A$ with frequency $f_0 = 1 \ \text{kHz}$ is:
- $$|Y_{\rm A} (f)| = 1.6\hspace{0.05cm}{\rm V} \cdot {\rm \delta } (f \pm f_0) + 0.4\hspace{0.05cm}{\rm V} \cdot {\rm \delta } (f \pm 3 f_0) .$$
- For another filter $\rm B$ on the other hand, is always a harmonic oscillation with the (single) frequency $f_0$. For the frequencies $f_0$ given in the table the amplitudes $A_y(f_0)$ and the phases $φ_y(f_0)$ are measured. Here, the following holds:
- $$Y_{\rm B} (f) = {A_y}/{2} \cdot {\rm e}^{ {\rm j} \varphi_y} \cdot {\rm \delta } (f + f_0) + {A_y}/{2} \cdot {\rm e}^{ -{\rm j} \varphi_y} \cdot {\rm \delta } (f - f_0).$$
In the task, filter $\rm B$ should be given in the form:$$H_{\rm B}(f) = {\rm e}^{-a_{\rm B}(f)}\cdot {\rm e}^{-{\rm j} \hspace{0.05cm} \cdot \hspace{0.05cm} b_{\rm B}(f)}$$.
Here,
- $a_{\rm B}(f)$ denotes the damping curve, and
- $b_{\rm B}(f)$ the phse response.
Please note:
- The task belongs to the chapter System Description in Frequency Domain.
Questions
Sample solution
(1) Richtig sind die Lösungsvorschläge 2 und 3:
- Bei einem LZI–System gilt $Y(f) = X(f) · H(f)$.
- Daher ist es nicht möglich, dass im Ausgangssignal ein Anteil mit $3 f_0$ vorhanden ist, wenn ein solcher im Eingangssignal fehlt.
- Das heißt: Es liegt hier kein LZI–System vor und dementsprechend ist auch kein Frequenzgang angebbar.
(2) Richtig ist der Lösungsvorschlag 3:
- Aufgrund der angegeben Zahlenwerte für $A_y(f_0)$ kann von einem Bandpass ausgegangen werden.
(3) Mit $A_x = 2 \text{ V}$ und $\varphi_x = 90^\circ$ (Sinusfunktion) erhält man für $f_0 = f_3 =3 \text{ kHz}$:
- $$H_{\rm B} (f_3) = \frac{A_y}{A_x} \cdot {\rm e}^{ -{\rm j} (\varphi_x - \varphi_y)} = \frac{1\hspace{0.05cm}{\rm V}}{2\hspace{0.05cm}{\rm V}} \cdot {\rm e}^{ -{\rm j} (90^{\circ} - 90^{\circ})} = 0.5.$$
Somit ergeben sich für $f_0 = f_3 = 3 \text{ kHz}$ die Werte
- $a_{\rm B} (f_3)\rm \underline{\: ≈ \: 0.693 \: Np}$,
- $b_{\rm B}(f_3) \rm \underline{\: = \: 0 \: (Grad)}$.
(4) In analoger Weise kann der Frequenzgang bei $f_0 = f_2 =2 \text{ kHz}$ ermittelt werden:
- $$H_{\rm B} ( f_2) = \frac{0.8\hspace{0.05cm}{\rm V}}{2\hspace{0.05cm}{\rm V}} \cdot {\rm e}^{ -{\rm j} (90^{\circ} - 70^{\circ})} = 0.4\cdot {\rm e}^{ -{\rm j} 20^{\circ}}.$$
Damit erhält man für $f_0 = f_2 = 2 \ \text{ kHz}$:
- $a_{\rm B}(f_2) \rm \underline{\: ≈ \: 0.916 \: Np}$,
- $b_{\rm B}(f_2) \rm \underline{\: = \: 20°}$.
Bei $f_0 = -f_2 =-\hspace{-0.01cm}2 \text{ kHz}$ gilt der gleiche Dämpfungswert. Die Phase hat jedoch das umgekehrte Vorzeichen. Also ist $b_{\rm B}(–f_2) = \ –\hspace{-0.01cm}20^{\circ}.$
