Difference between revisions of "Aufgaben:Exercise 1.6: Root Nyquist System"

From LNTwww
m (Text replacement - "Category:Aufgaben zu Digitalsignalübertragung" to "Category:Digital Signal Transmission: Exercises")
Line 1: Line 1:
  
{{quiz-Header|Buchseite=Digitalsignalübertragung/Optimierung der Basisbandübertragungssysteme
+
{{quiz-Header|Buchseite=Digital_Signal_Transmission/Optimization_of_Baseband_Transmission_Systems
 
}}
 
}}
  
  
[[File:P_ID1292__Dig_A_1_6.png|right|frame|Sender & Empfänger: Cosinus-Spektrum]]
+
[[File:P_ID1292__Dig_A_1_6.png|right|frame|Transmitter & receiver: Cosine spectrum]]
Die nebenstehende Grafik zeigt
+
The diagram on the right shows
*das Spektrum  $G_{s}(f)$  des Sendegrundimpulses,
+
*the spectrum  $G_{s}(f)$  of the basic transmission pulse,
*den Frequenzgang  $H_{\rm E}(f)$  des Empfangsfilters
+
*the frequency response  $H_{\rm E}(f)$  of the receiver filter
  
  
eines binären und bipolaren Übertragungssystems, die zueinander formgleich sind:
+
of a binary and bipolar transmission system, which are identical in shape to each other:
 
:$$G_s(f)  =  \left\{ \begin{array}{c} A \cdot \cos \left( \frac {\pi \cdot f}{2 \cdot f_2} \right)  \\
 
:$$G_s(f)  =  \left\{ \begin{array}{c} A \cdot \cos \left( \frac {\pi \cdot f}{2 \cdot f_2} \right)  \\
 
  \\ 0 \\  \end{array} \right.\quad
 
  \\ 0 \\  \end{array} \right.\quad
\begin{array}{*{1}c} {\rm{f\ddot{u}r}}\\  \\  \\ \end{array}
+
\begin{array}{*{1}c} {\rm{for}}\\  \\  \\ \end{array}
\begin{array}{*{20}c}|f| \le f_2 \hspace{0.05cm}, \\ \\  {\rm sonst }\hspace{0.05cm}, \\
+
\begin{array}{*{20}c}|f| \le f_2 \hspace{0.05cm}, \\ \\  {\rm else }\hspace{0.05cm}, \\
 
\end{array}$$
 
\end{array}$$
 
:$$H_{\rm E }(f)  =  \left\{ \begin{array}{c} 1 \cdot \cos \left( \frac {\pi \cdot f}{2 \cdot f_2} \right)  \\
 
:$$H_{\rm E }(f)  =  \left\{ \begin{array}{c} 1 \cdot \cos \left( \frac {\pi \cdot f}{2 \cdot f_2} \right)  \\
 
  \\ 0 \\  \end{array} \right.\quad
 
  \\ 0 \\  \end{array} \right.\quad
\begin{array}{*{1}c} {\rm{f\ddot{u}r}}\\  \\  \\ \end{array}
+
\begin{array}{*{1}c} {\rm{for}}\\  \\  \\ \end{array}
\begin{array}{*{20}c}|f| \le f_2 \hspace{0.05cm}, \\ \\  {\rm sonst }\hspace{0.05cm}. \\
+
\begin{array}{*{20}c}|f| \le f_2 \hspace{0.05cm}, \\ \\  {\rm else }\hspace{0.05cm}. \\
 
\end{array}$$
 
\end{array}$$
In der gesamten Aufgabe gelte  $A = 10^{–6} \ \rm V/Hz$  und  $f_{2} = 1 \ \rm MHz$.
+
In the whole exercise  $A = 10^{–6} \ \rm V/Hz$  and  $f_{2} = 1 \ \rm MHz$ are valid.
  
*Unter der Voraussetzung, dass die Bitrate  $R = 1/T$  richtig gewählt wird, erfüllt der Detektionsgrundimpuls  $g_{d}(t) = g_{s}(t) ∗ h_{\rm E}(t)$  das erste Nyquistkriterium.  
+
*Assuming that the bit rate  $R = 1/T$  is chosen correctly, the basic transmitter pulse  $g_{d}(t) = g_{s}(t) ∗ h_{\rm E}(t)$  satisfies the first Nyquist criterion.
*Bei der dazugehörigen Spektralfunktion  $G_{d}(f)$  erfolgt dabei der Flankenabfall cosinusförmig ähnlich einem Cosinus–Rolloff–Spektrum.  
+
*For the associated spectral function  $G_{d}(f)$,  the rolloff thereby occurs cosinusoidally similar to a cosine rolloff spectrum.
*Der Rolloff–Faktor  $r$  ist in dieser Aufgabe zu ermitteln.
+
*The rolloff factor  $r$  is to be determined in this exercise.
  
  
Line 32: Line 32:
  
  
''Hinweise:''  
+
''Notes:''  
*Die Aufgabe gehört zum  Kapitel  [[Digital_Signal_Transmission/Optimierung_der_Basisbandübertragungssysteme|Optimierung der Basisbandübertragungssysteme]].
+
*The exercise belongs to the chapter  [[Digital_Signal_Transmission/Optimization_of_Baseband_Transmission_Systems|Optimization of Baseband Transmission Systems]].
 
   
 
   
*Zahlenwerte der Q–Funktion liefert zum Beispiel das interaktive Applet  [[Applets:Komplementäre_Gaußsche_Fehlerfunktionen|Komplementäre Gaußsche Fehlerfunktionen]].
+
*Numerical values of the Q-function are provided, for example, by the interactive applet  [[Applets:Komplementäre_Gaußsche_Fehlerfunktionen|Complementary Gaussian Error Functions]].
*Der Crestfaktor ist der Qotient aus Maximalwert und Effektivwert des Sendesignals und damit ein Maß für die sendeseitigen Impulsinterferenzen:
+
*The crest factor is the quotient of the maximum value and the rms value of the transmitted signal and thus a measure of the intersymbol interfering at the transmitting end:
 
:$$C_{\rm S} =  \frac{s_0}{\sqrt{E_{\rm B}/T}} = \frac{{\rm Max}[s(t)]}{\sqrt{{\rm E}[s^2(t)]}}=  {s_0}/{s_{\rm eff}}.$$
 
:$$C_{\rm S} =  \frac{s_0}{\sqrt{E_{\rm B}/T}} = \frac{{\rm Max}[s(t)]}{\sqrt{{\rm E}[s^2(t)]}}=  {s_0}/{s_{\rm eff}}.$$
  
  
===Fragebogen===
+
===Questions===
  
 
<quiz display=simple>
 
<quiz display=simple>
{Berechnen Sie das Nyquistspektrum &nbsp;$G_{d}(f)$. Wie groß sind die Nyquistfrequenz und der Rolloff–Faktor?
+
{Calculate the Nyquist spectrum &nbsp;$G_{d}(f)$. What is the Nyquist frequency and the rolloff factor?
 
|type="{}"}
 
|type="{}"}
 
$f_{\rm Nyq} \ = \ ${ 0.5 3% } $\ \rm MHz$
 
$f_{\rm Nyq} \ = \ ${ 0.5 3% } $\ \rm MHz$
 
$r \ = \ ${ 1 3% }
 
$r \ = \ ${ 1 3% }
  
{Wie groß ist die Bitrate des vorliegenden Nyquistsystems?
+
{What is the bit rate of the Nyquist system at hand?
 
|type="{}"}
 
|type="{}"}
 
$R \ = \ $ { 1 3% } $\ \rm Mbit/s$
 
$R \ = \ $ { 1 3% } $\ \rm Mbit/s$
  
{Warum handelt es sich unter der Nebenbedingung „Leistungsbegrenzung” um ein optimales System?
+
{Why is it an optimal system under the constraint "power limitation"?
 
|type="[]"}
 
|type="[]"}
+Das Gesamtsystem erfüllt die Nyquistbedingung.
+
+The overall system satisfies the Nyquist condition.
-Der Crestfaktor ist &nbsp;$C_{\rm S} = 1$.
+
-The crest factor is &nbsp;$C_{\rm S} = 1$.
+Das Empfangsfilter &nbsp;$H_{\rm E}(f)$&nbsp; ist an den Sendegrundimpuls &nbsp;$G_{s}(f)$&nbsp; angepasst.
+
+The receiver filter &nbsp;$H_{\rm E}(f)$&nbsp; is matched to the basic transmission pulse &nbsp;$G_{s}(f)$.&nbsp;  
  
{Welche Bitfehlerwahrscheinlichkeit ergibt sich, wenn für die Leistungsdichte des AWGN–Rauschens &nbsp;$N_{0} = 8 \cdot 10^{–8}\ \rm V^{2}/Hz$&nbsp; $($bezogen auf &nbsp;$1 Ω)$&nbsp; gilt?
+
{What is the bit error probability if the power density of the AWGN noise is &nbsp;$N_{0} = 8 \cdot 10^{–8}\ \rm V^{2}/Hz$&nbsp; $($referenced to &nbsp;$1 Ω)$?&nbsp;  
 
|type="{}"}
 
|type="{}"}
 
$p_{\rm B} \ = \ ${ 0.287 3% } $\ \cdot 10^{-6}$
 
$p_{\rm B} \ = \ ${ 0.287 3% } $\ \cdot 10^{-6}$
Line 66: Line 66:
 
</quiz>
 
</quiz>
  
===Musterlösung===
+
===Solution===
 
{{ML-Kopf}}
 
{{ML-Kopf}}
'''(1)'''&nbsp; Mit den Funktionen $G_{s}(f)$ und $H_{\rm E}(f)$ gilt für das Spektrum des Detektionsgrundimpulses für $|f| \leq f_{2}$:
+
'''(1)'''&nbsp; With the functions $G_{s}(f)$ and $H_{\rm E}(f)$, the spectrum of the basic transmitter pulse for $|f| \leq f_{2}$:
 
:$$G_d(f)  =  G_s(f) \cdot H_{\rm E}(f) = A \cdot \cos^2 \left( \frac {\pi \cdot f}{2 \cdot f_2} \right).$$
 
:$$G_d(f)  =  G_s(f) \cdot H_{\rm E}(f) = A \cdot \cos^2 \left( \frac {\pi \cdot f}{2 \cdot f_2} \right).$$
*Nach der allgemeinen Definition des Cosinus–Rolloff–Spektrums ergeben sich die Eckfrequenzen $f_{1} = 0$ und $f_{2} = 1\ \rm MHz$.
+
*According to the general definition of the cosine rolloff spectrum, the corner frequencies $f_{1} = 0$ and $f_{2} = 1\ \rm MHz$ are obtained.
* Daraus folgt für die Nyquistfrequenz (Symmetriepunkt bezüglich des Flankenabfalls):
+
* From this follows for the Nyquist frequency (symmetry point with respect to the rolloff):
 
:$$f_{\rm Nyq} =  \frac{f_1 +f_2 }
 
:$$f_{\rm Nyq} =  \frac{f_1 +f_2 }
 
{2 } \hspace{0.1cm}\underline { = 0.5\,{\rm MHz}}\hspace{0.05cm}.$$
 
{2 } \hspace{0.1cm}\underline { = 0.5\,{\rm MHz}}\hspace{0.05cm}.$$
*Der Rolloff–Faktor beträgt
+
*The rolloff factor is
 
:$$r = \frac{f_2 -f_1 } {f_2 +f_1 } \hspace{0.1cm}\underline {= 1} \hspace{0.05cm}.$$
 
:$$r = \frac{f_2 -f_1 } {f_2 +f_1 } \hspace{0.1cm}\underline {= 1} \hspace{0.05cm}.$$
*Das bedeutet: &nbsp; $G_{d}(f)$ beschreibt ein $\cos^{2}$–Spektrum.
+
*This means: &nbsp; $G_{d}(f)$ describes a $\cos^{2}$ spectrum.
  
  
  
'''(2)'''&nbsp; Der Zusammenhang zwischen Nyquistfrequenz und Symboldauer $T$ lautet $f_{\rm Nyq} = 1/(2T)$.  
+
'''(2)'''&nbsp; The relationship between Nyquist frequency and symbol duration $T$ is $f_{\rm Nyq} = 1/(2T)$.  
*Daraus folgt für die Bitrate $R = 1/T = 2 \cdot f_{\rm Nyq}\ \underline{= 1 \ \rm Mbit/s}$.  
+
*From this it follows for the bit rate $R = 1/T = 2 \cdot f_{\rm Nyq}\ \underline{= 1 \ \rm Mbit/s}$.  
*Beachten Sie die unterschiedlichen Einheiten für Frequenz und Bitrate.
+
*Note the different units for frequency and bit rate.
  
  
  
'''(3)'''&nbsp; Die <u>erste und die dritte Lösungsalternative</u> sind zutreffend:
+
'''(3)'''&nbsp; The <u>first and third solutions</u> are correct:
*Es handelt es sich um ein optimales Binärsystem unter der Nebenbedingung der Leistungsbegrenzung.  
+
*This is an optimal binary system under the constraint of power limitation.  
*Der Crestfaktor ist bei Leistungsbegrenzung nicht von Bedeutung. Bei den hier gegebenen Voraussetzungen würde $C_{\rm S} > 1$ gelten.
+
*The crest factor is not important under power limitation. With the conditions given here, $C_{\rm S} > 1$ would apply.
  
  
  
'''(4)'''&nbsp; Die Bitfehlerwahrscheinlichkeit eines optimalen Systems kann wie folgt berechnet werden:
+
'''(4)'''&nbsp; The bit error probability of an optimal system can be calculated as follows:
 
:$$p_{\rm B} =  {\rm Q} \left( \sqrt{{2 \cdot E_{\rm B}}/{N_0}}\right)\hspace{0.05cm}.$$
 
:$$p_{\rm B} =  {\rm Q} \left( \sqrt{{2 \cdot E_{\rm B}}/{N_0}}\right)\hspace{0.05cm}.$$
*Im vorliegenden Beispiel erhält man für die mittlere Energie pro Bit:
+
*In the given example, we obtain for the average energy per bit:
 
:$$E_{\rm B}  = \
 
:$$E_{\rm B}  = \
 
  \int_{-\infty}^{+\infty}|G_s(f)|^2 \,{\rm d} f  =
 
  \int_{-\infty}^{+\infty}|G_s(f)|^2 \,{\rm d} f  =
 
  A^2 \cdot \int_{-1/T}^{+1/T} H_{\rm Nyq}(f) \,{\rm d} f  
 
  A^2 \cdot \int_{-1/T}^{+1/T} H_{\rm Nyq}(f) \,{\rm d} f  
 
   = \ \frac {A^2}{T} = \frac {(10^{-6}\,{\rm V/Hz})^2}{10^{-6}\,{\rm s}} = 10^{-6}\,{\rm V^2s}\hspace{0.05cm}.$$
 
   = \ \frac {A^2}{T} = \frac {(10^{-6}\,{\rm V/Hz})^2}{10^{-6}\,{\rm s}} = 10^{-6}\,{\rm V^2s}\hspace{0.05cm}.$$
*Mit $N_{0} = 8 \cdot 10^{–8} \ \rm V^{2}/Hz$ ergibt sich daraus weiter:
+
*With $N_{0} = 8 \cdot 10^{–8} \ \rm V^{2}/Hz$, this further gives:
 
:$$p_{\rm B} =  {\rm Q} \left( \sqrt{\frac{2 \cdot 10^{-6}\,{\rm V^2s}}{8 \cdot 10^{-8}\,{\rm
 
:$$p_{\rm B} =  {\rm Q} \left( \sqrt{\frac{2 \cdot 10^{-6}\,{\rm V^2s}}{8 \cdot 10^{-8}\,{\rm
 
  V^2/Hz}}}\right)=
 
  V^2/Hz}}}\right)=

Revision as of 14:37, 18 March 2022


Transmitter & receiver: Cosine spectrum

The diagram on the right shows

  • the spectrum  $G_{s}(f)$  of the basic transmission pulse,
  • the frequency response  $H_{\rm E}(f)$  of the receiver filter


of a binary and bipolar transmission system, which are identical in shape to each other:

$$G_s(f) = \left\{ \begin{array}{c} A \cdot \cos \left( \frac {\pi \cdot f}{2 \cdot f_2} \right) \\ \\ 0 \\ \end{array} \right.\quad \begin{array}{*{1}c} {\rm{for}}\\ \\ \\ \end{array} \begin{array}{*{20}c}|f| \le f_2 \hspace{0.05cm}, \\ \\ {\rm else }\hspace{0.05cm}, \\ \end{array}$$
$$H_{\rm E }(f) = \left\{ \begin{array}{c} 1 \cdot \cos \left( \frac {\pi \cdot f}{2 \cdot f_2} \right) \\ \\ 0 \\ \end{array} \right.\quad \begin{array}{*{1}c} {\rm{for}}\\ \\ \\ \end{array} \begin{array}{*{20}c}|f| \le f_2 \hspace{0.05cm}, \\ \\ {\rm else }\hspace{0.05cm}. \\ \end{array}$$

In the whole exercise  $A = 10^{–6} \ \rm V/Hz$  and  $f_{2} = 1 \ \rm MHz$ are valid.

  • Assuming that the bit rate  $R = 1/T$  is chosen correctly, the basic transmitter pulse  $g_{d}(t) = g_{s}(t) ∗ h_{\rm E}(t)$  satisfies the first Nyquist criterion.
  • For the associated spectral function  $G_{d}(f)$,  the rolloff thereby occurs cosinusoidally similar to a cosine rolloff spectrum.
  • The rolloff factor  $r$  is to be determined in this exercise.




Notes:

  • Numerical values of the Q-function are provided, for example, by the interactive applet  Complementary Gaussian Error Functions.
  • The crest factor is the quotient of the maximum value and the rms value of the transmitted signal and thus a measure of the intersymbol interfering at the transmitting end:
$$C_{\rm S} = \frac{s_0}{\sqrt{E_{\rm B}/T}} = \frac{{\rm Max}[s(t)]}{\sqrt{{\rm E}[s^2(t)]}}= {s_0}/{s_{\rm eff}}.$$


Questions

1

Calculate the Nyquist spectrum  $G_{d}(f)$. What is the Nyquist frequency and the rolloff factor?

$f_{\rm Nyq} \ = \ $

$\ \rm MHz$
$r \ = \ $

2

What is the bit rate of the Nyquist system at hand?

$R \ = \ $

$\ \rm Mbit/s$

3

Why is it an optimal system under the constraint "power limitation"?

The overall system satisfies the Nyquist condition.
The crest factor is  $C_{\rm S} = 1$.
The receiver filter  $H_{\rm E}(f)$  is matched to the basic transmission pulse  $G_{s}(f)$. 

4

What is the bit error probability if the power density of the AWGN noise is  $N_{0} = 8 \cdot 10^{–8}\ \rm V^{2}/Hz$  $($referenced to  $1 Ω)$? 

$p_{\rm B} \ = \ $

$\ \cdot 10^{-6}$


Solution

(1)  With the functions $G_{s}(f)$ and $H_{\rm E}(f)$, the spectrum of the basic transmitter pulse for $|f| \leq f_{2}$:

$$G_d(f) = G_s(f) \cdot H_{\rm E}(f) = A \cdot \cos^2 \left( \frac {\pi \cdot f}{2 \cdot f_2} \right).$$
  • According to the general definition of the cosine rolloff spectrum, the corner frequencies $f_{1} = 0$ and $f_{2} = 1\ \rm MHz$ are obtained.
  • From this follows for the Nyquist frequency (symmetry point with respect to the rolloff):
$$f_{\rm Nyq} = \frac{f_1 +f_2 } {2 } \hspace{0.1cm}\underline { = 0.5\,{\rm MHz}}\hspace{0.05cm}.$$
  • The rolloff factor is
$$r = \frac{f_2 -f_1 } {f_2 +f_1 } \hspace{0.1cm}\underline {= 1} \hspace{0.05cm}.$$
  • This means:   $G_{d}(f)$ describes a $\cos^{2}$ spectrum.


(2)  The relationship between Nyquist frequency and symbol duration $T$ is $f_{\rm Nyq} = 1/(2T)$.

  • From this it follows for the bit rate $R = 1/T = 2 \cdot f_{\rm Nyq}\ \underline{= 1 \ \rm Mbit/s}$.
  • Note the different units for frequency and bit rate.


(3)  The first and third solutions are correct:

  • This is an optimal binary system under the constraint of power limitation.
  • The crest factor is not important under power limitation. With the conditions given here, $C_{\rm S} > 1$ would apply.


(4)  The bit error probability of an optimal system can be calculated as follows:

$$p_{\rm B} = {\rm Q} \left( \sqrt{{2 \cdot E_{\rm B}}/{N_0}}\right)\hspace{0.05cm}.$$
  • In the given example, we obtain for the average energy per bit:
$$E_{\rm B} = \ \int_{-\infty}^{+\infty}|G_s(f)|^2 \,{\rm d} f = A^2 \cdot \int_{-1/T}^{+1/T} H_{\rm Nyq}(f) \,{\rm d} f = \ \frac {A^2}{T} = \frac {(10^{-6}\,{\rm V/Hz})^2}{10^{-6}\,{\rm s}} = 10^{-6}\,{\rm V^2s}\hspace{0.05cm}.$$
  • With $N_{0} = 8 \cdot 10^{–8} \ \rm V^{2}/Hz$, this further gives:
$$p_{\rm B} = {\rm Q} \left( \sqrt{\frac{2 \cdot 10^{-6}\,{\rm V^2s}}{8 \cdot 10^{-8}\,{\rm V^2/Hz}}}\right)= {\rm Q} \left( \sqrt{25}\right)= {\rm Q} (5) \hspace{0.1cm}\underline {= 0.287 \cdot 10^{-6}}\hspace{0.05cm}.$$