Difference between revisions of "Aufgaben:Exercise 2.5: Scatter Function"

From LNTwww
(Die Seite wurde neu angelegt: „ {{quiz-Header|Buchseite=Mobile Kommunikation/Das GWSSUS–Kanalmodell}} right|frame|Verzögerungs–Doppler–Funktion…“)
 
m (Text replacement - "Category:Exercises for Mobile Communications" to "Category:Mobile Communications: Exercises")
 
(21 intermediate revisions by 2 users not shown)
Line 1: Line 1:
  
{{quiz-Header|Buchseite=Mobile Kommunikation/Das GWSSUS–Kanalmodell}}
+
{{quiz-Header|Buchseite=Mobile_Communications/The_GWSSUS_Channel_Model}}
  
[[File:P_ID2164__Mob_A_2_5.png|right|frame|Verzögerungs–Doppler–Funktion]]
+
[[File:P_ID2164__Mob_A_2_5.png|right|frame|Delay-Doppler profile]]
Für den Mobilfunkkanal als zeitvariantes System gibt es insgesamt vier Systemfunktionen, die über die Fouriertransformation miteinander verknüpft sind. Mit der in unserem Lerntutorial formalisierten Nomenklatur sind diese:
+
For the mobile radio channel as a time-variant system, there are a total of four system functions that are linked with each other via the Fourier transform.  With the nomenclature from our tutorial, these are:
* die zeitvariante Impulsantwort  $h(\tau, \hspace{0.05cm}t)$, die wir hier auch mit  $\eta_{\rm VZ}(\tau,\hspace{0.05cm} t)$  bezeichnen,
+
* the time-variant impulse response  $h(\tau, \hspace{0.05cm}t)$, which we also denote here as  $\eta_{\rm VZ}(\tau,\hspace{0.05cm} t)$,
* die Verzögerungs–Doppler–Funktion  $\eta_{\rm VD}(\tau,\hspace{0.05cm} f_{\rm D})$,
+
* the delay-Doppler function  $\eta_{\rm VD}(\tau,\hspace{0.05cm} f_{\rm D})$,
* die Frequenz–Doppler–Funktion  $\eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D})$,  
+
* the frequency-Doppler function  $\eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D})$,  
* die zeitvariante Übertragungsfunktion  $\eta_{\rm FZ}(f,\hspace{0.05cm}t)$  oder  $H(f, \hspace{0.05cm}t)$.
+
* the time-variant transfer function  $\eta_{\rm FZ}(f,\hspace{0.05cm}t)$  or  $H(f, \hspace{0.05cm}t)$.
  
  
Die Indizes stehen für die <b>V</b>erzögerung&nbsp; $\tau$, die <b>Z</b>eit&nbsp; $t$, die <b>F</b>requenz&nbsp; $f$&nbsp; sowie die <b>D</b>opplerfrequenz&nbsp; $f_{\rm D}$.
+
The four possible system functions are uniformly denoted by&nbsp; $\boldsymbol{\eta}_{12}$&nbsp;.<br>
  
Gegeben ist die Verzögerungs&ndash;Doppler&ndash;Funktion&nbsp; $\eta_{\rm VD}(\tau,\hspace{0.05cm} f_{\rm D})$&nbsp; entsprechend der oberen Grafik:
+
*The first subindex is either a&nbsp; $\boldsymbol{\rm V}$&nbsp; $($because of German&nbsp; $\rm V\hspace{-0.05cm}$erzögerung &nbsp; &rArr; &nbsp; delay time &nbsp;$\tau)$&nbsp; or&nbsp; a&nbsp; $\boldsymbol{\rm F}$&nbsp; $($frequency&nbsp; $f)$.<br>
 +
 
 +
*Either a&nbsp; $\boldsymbol{\rm Z}$&nbsp; $($because of German&nbsp; $\rm Z\hspace{-0.05cm}$eit &nbsp; &rArr; &nbsp; time &nbsp;$t)$&nbsp;  or a&nbsp; $\boldsymbol{\rm D}$&nbsp; $($Doppler frequency&nbsp; $f_{\rm D})$&nbsp; is possible as the second subindex.
 +
 
 +
 
 +
The delay&ndash;Doppler function&nbsp; $\eta_{\rm VD}(\tau,\hspace{0.05cm} f_{\rm D})$&nbsp; is shown in the plot:
 
:$$\eta_{\rm VD}(\tau, f_{\rm D}) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac{1}{\sqrt{2}} \cdot \delta (\tau) \cdot \delta (f_{\rm D} - 100\,{\rm Hz})-$$
 
:$$\eta_{\rm VD}(\tau, f_{\rm D}) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac{1}{\sqrt{2}} \cdot \delta (\tau) \cdot \delta (f_{\rm D} - 100\,{\rm Hz})-$$
 
:$$\hspace{1.75cm} \ - \ \hspace{-0.1cm} \frac{1}{2} \cdot \delta (\tau- 1\,{\rm \mu s}) \cdot \delta (f_{\rm D} - 50\,{\rm Hz})-  
 
:$$\hspace{1.75cm} \ - \ \hspace{-0.1cm} \frac{1}{2} \cdot \delta (\tau- 1\,{\rm \mu s}) \cdot \delta (f_{\rm D} - 50\,{\rm Hz})-  
Line 18: Line 23:
 
  \hspace{0.05cm}.$$
 
  \hspace{0.05cm}.$$
  
In der Literatur wird&nbsp; $\eta_{\rm VD}(\tau, \hspace{0.05cm}f_{\rm D})$&nbsp; oft auch <i>Scatter&ndash;Funktion</i> genannt und mit&nbsp; $s(\tau, \hspace{0.05cm}f_{\rm D})$&nbsp; bezeichnet.
+
In the literature,&nbsp; $\eta_{\rm VD}(\tau, \hspace{0.05cm}f_{\rm D})$&nbsp; is often also called&nbsp; '''scatter function'''&nbsp; and denoted with&nbsp; $s(\tau, \hspace{0.05cm}f_{\rm D})$&nbsp;.
 
 
In dieser Aufgabe sollen die zugehörige Verzögerungs&ndash;Zeit&ndash;Funktion&nbsp; $\eta_{\rm VZ}(\tau, \hspace{0.05cm}t)$&nbsp; und die Frequenz&ndash;Doppler&ndash;Funktion&nbsp; $\eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D})$&nbsp; ermittelt werden.
 
  
 +
In this task, the associated delay&ndash;time function&nbsp; $\eta_{\rm VZ}(\tau, \hspace{0.05cm}t)$&nbsp; and the frequency&ndash;Doppler function&nbsp; $\eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D})$&nbsp; are to be determined.
  
  
Line 28: Line 32:
  
  
''Hinweise:''
+
''Notes:''
* Die Aufgabe soll den Lehrstoff des Kapitels&nbsp; [[Mobile_Kommunikation/Das_GWSSUS%E2%80%93Kanalmodell| Das GWSSUS&ndash;Kanalmodell]] verdeutlichen.
+
* This exercise should clarify the subject matter of the chapter&nbsp; [[Mobile_Communications/The_GWSSUS_Channel_Model| The GWSSUS Channel Model]].
* Der Zusammenhang zwischen den einzelnen Systemfunktionen ist in der&nbsp; [[Mobile_Kommunikation/Das_GWSSUS%E2%80%93Kanalmodell#Verallgemeinerte_Systemfunktionen_zeitvarianter_Systeme|Grafik auf der ersten Seite]]&nbsp; dieses Kapitels angegeben.
+
* The relationship between the individual system functions is given in the&nbsp; [[Mobile_Communications/The_GWSSUS_Channel_Model#Generalized_system_functions_of_time_variant_systems|graph on the first page]]&nbsp; of this chapter.
*Beachten Sie, dass oben die Betragsfunktion&nbsp; $|\eta_{\rm VD}(\tau, \hspace{0.05cm} f_{\rm D})|$&nbsp; dargestellt ist, so dass negative Gewichte der Diracfunktionen nicht zu erkennen sind.  
+
*Note that the magnitude function&nbsp; $|\eta_{\rm VD}(\tau, \hspace{0.05cm} f_{\rm D})|$&nbsp; is shown above, so negative weights of the Dirac functions cannot be recognized.  
  
  
  
===Fragebogen===
+
===Questionnaire===
 
<quiz display=simple>
 
<quiz display=simple>
{Bei welchen&nbsp; $\tau$&ndash;Werten hat die 2D&ndash;Impulsantwort&nbsp; $\eta_{\rm VZ}(\tau, \hspace{0.05cm}t)$&nbsp; Anteile? Bei
+
{At which values of&nbsp; $\tau$&nbsp; there are the components of 2D impulse response&nbsp; $\eta_{\rm VZ}(\tau, \hspace{0.05cm}t)$&nbsp;?
 
|type="[]"}
 
|type="[]"}
 
+ $\tau = 0$,
 
+ $\tau = 0$,
 
+ $\tau = 1 \ \rm &micro; s$,
 
+ $\tau = 1 \ \rm &micro; s$,
- anderen $\tau$&ndash;Werte.
+
- other $\tau$&ndash;values.
  
{Berechnen Sie&nbsp; $|\eta_{\rm VZ}(\tau = 0,\hspace{0.05cm}t)|$. Welche der folgenden Aussagen treffen zu?
+
{Calculate&nbsp; $|\eta_{\rm VZ}(\tau = 0,\hspace{0.05cm}t)|$.&nbsp; Which of the following statements are true?
 
|type="()"}
 
|type="()"}
+ $|\eta_{\rm VZ}(\tau = 0,\hspace{0.05cm} t)|$&nbsp; ist unabhängig von&nbsp; $t$.
+
+ $|\eta_{\rm VZ}(\tau = 0,\hspace{0.05cm} t)|$&nbsp; is independent of&nbsp; $t$.
- Es gilt&nbsp; $\eta_{\rm VZ}(\tau = 0, \hspace{0.05cm}t) = A \cdot \cos {(2\pi f_0 t)}$.
+
- &nbsp; $\eta_{\rm VZ}(\tau = 0, \hspace{0.05cm}t) = A \cdot \cos {(2\pi f_0 t)}$.
- Es gilt&nbsp; $\eta_{\rm VZ}(\tau = 0, \hspace{0.05cm}t) = A \cdot \sin {(2\pi f_0 t)}$.
+
- &nbsp; $\eta_{\rm VZ}(\tau = 0, \hspace{0.05cm}t) = A \cdot \sin {(2\pi f_0 t)}$.
  
{Berechnen Sie&nbsp; $|\eta_{\rm VZ}(\tau = 1 \ {\rm &micro; s},\hspace{0.05cm} t)|$. Welche der Aussagen treffen zu?
+
{Calculate&nbsp; $|\eta_{\rm VZ}(\tau = 1 \ {\rm &micro; s},\hspace{0.05cm} t)|$.&nbsp; Which of the following statements are true?
 
|type="()"}
 
|type="()"}
- $|\eta_{\rm VZ}(\tau = 1 \ {\rm &micro; s},\hspace{0.05cm} t)|$&nbsp; ist unabhängig von&nbsp; $t$.
+
- $|\eta_{\rm VZ}(\tau = 1 \ {\rm &micro; s},\hspace{0.05cm} t)|$&nbsp; is independent of&nbsp; $t$.
+ Es gilt&nbsp; $\eta_{\rm VZ}(\tau = 1 \ {\rm &micro; s}, \hspace{0.05cm}t) = A \cdot \cos {(2\pi f_0 t)}$.
+
+ &nbsp; $\eta_{\rm VZ}(\tau = 1 \ {\rm &micro; s}, \hspace{0.05cm}t) = A \cdot \cos {(2\pi f_0 t)}$.
- Es gilt&nbsp; $\eta_{\rm VZ}(\tau = 1 \ {\rm &micro; s}, \hspace{0.05cm}t) = A \cdot \sin {(2\pi f_0 t)}$.
+
- &nbsp; $\eta_{\rm VZ}(\tau = 1 \ {\rm &micro; s}, \hspace{0.05cm}t) = A \cdot \sin {(2\pi f_0 t)}$.
  
{Betrachten Sie nun die Frequenz&ndash;Doppler&ndash;Darstellung&nbsp; $\eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D})$. Für welche&nbsp; $f_{\rm D}$&ndash;Werte ist diese Funktion ungleich Null? Für
+
{Consider the frequency&ndash;Doppler representation&nbsp; $\eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D})$.&nbsp; For which values of&nbsp; $f_{\rm D}$ is this function <b>not</b> equal to zero?
 
|type="[]"}
 
|type="[]"}
 
- $f_{\rm D} = 0$,
 
- $f_{\rm D} = 0$,
Line 61: Line 65:
 
- $f_{\rm D} = &plusmn; 100 \ \rm Hz$.
 
- $f_{\rm D} = &plusmn; 100 \ \rm Hz$.
  
{Welche der folgenden Aussagen gelten für&nbsp; $\eta_{\rm FD}(f,\hspace{0.05cm} f_{\rm D})$?
+
{Which of the following statements are true for&nbsp; $\eta_{\rm FD}(f,\hspace{0.05cm} f_{\rm D})$?
 
|type="()"}
 
|type="()"}
+ $|\eta_{\rm FD}(f,\hspace{0.05cm} f_{\rm D} = 100 \ \rm Hz)|$&nbsp; ist unabhängig von&nbsp; $f_{\rm D}$.
+
+ $|\eta_{\rm FD}(f,\hspace{0.05cm} f_{\rm D} = 100 \ \rm Hz)|$&nbsp; is independent of $f_{\rm D}$.
- Es gilt&nbsp; $\eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D} = 50 \ {\rm Hz}) = A \cdot \cos {(2\pi t_0 f)}$.
+
- &nbsp; $\eta_{\rm FD}(f, \hspace{0.05cm} f_{\rm D} = 50 \ {\rm Hz}) = A \cdot \cos {(2\pi t_0 f)}$.
- Es gilt&nbsp; $\eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D} = 50 \ {\rm Hz}) = A \cdot \sin {(2\pi t_0 f)}$.
+
- &nbsp; $\eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D} = 50 \ {\rm Hz}) = A \cdot \sin {(2\pi t_0 f)}$.
  
{Wie kommt man zur zeitvarianten Übertragungsfunktion&nbsp; $\eta_{\rm FZ}(f, \hspace{0.05cm}t)$?
+
{How do you get the time-variant transfer function&nbsp; $\eta_{\rm FZ}(f, \hspace{0.05cm}t)$?
 
|type="[]"}
 
|type="[]"}
- Durch Fouriertransformation von&nbsp; $\eta_{\rm VD}(\tau,\hspace{0.05cm} f_{\rm D})$&nbsp; bezüglich&nbsp; $\tau$.
+
- By Fourier transformation of&nbsp; $\eta_{\rm VD}(\tau,\hspace{0.05cm} f_{\rm D})$&nbsp; with respect to&nbsp; $\tau$.
+ Durch Fouriertransformation von&nbsp; $\eta_{\rm VZ}(\tau, \hspace{0.05cm}t)$&nbsp; bezüglich&nbsp; $\tau$.
+
+ By Fourier transformation of&nbsp; $\eta_{\rm VZ}(\tau, \hspace{0.05cm}t)$&nbsp; with respect to&nbsp; $\tau$.
+ Durch Fourierrücktransformation von&nbsp; $\eta_{\rm FD}(f,\hspace{0.05cm} f_{\rm D})$&nbsp; bezüglich&nbsp; $f_{\rm D}$.
+
+ By inverse Fourier transformation of&nbsp; $\eta_{\rm FD}(f,\hspace{0.05cm} f_{\rm D})$&nbsp; with respect to $f_{\rm D}$.
 
</quiz>
 
</quiz>
  
===Musterlösung===
+
===Solution===
 
{{ML-Kopf}}
 
{{ML-Kopf}}
'''(1)'''&nbsp; Die zeitvariante Impulsantwort $h(\tau, \hspace{0.05cm} t) = \eta_{\rm VZ}(\tau, \hspace{0.05cm} t)$ ist die Fourierrücktransformierte der Verzögerungs&ndash;Doppler&ndash;Funktion $\eta_{\rm VD}(\tau,\hspace{0.05cm} f_{\rm D}) = s(\tau, \hspace{0.05cm} f_{\rm D})$:
+
'''(1)'''&nbsp; The time-variant impulse response&nbsp; $h(\tau, \hspace{0.05cm} t) = \eta_{\rm VZ}(\tau, \hspace{0.05cm} t)$&nbsp; is the inverse Fourier transform of the delay&ndash;Doppler function&nbsp; $\eta_{\rm VD}(\tau,\hspace{0.05cm} f_{\rm D}) = s(\tau, \hspace{0.05cm} f_{\rm D})$:
 
:$$\eta_{\rm VZ}(\tau, \hspace{0.05cm} t)
 
:$$\eta_{\rm VZ}(\tau, \hspace{0.05cm} t)
 
  \hspace{0.2cm}  \stackrel{t, \hspace{0.02cm}f_{\rm D}}{\circ\!\!-\!\!\!-\!\!\!-\!\!\bullet} \hspace{0.2cm} \eta_{\rm VD}(\tau, f_{\rm D})\hspace{0.05cm}.$$
 
  \hspace{0.2cm}  \stackrel{t, \hspace{0.02cm}f_{\rm D}}{\circ\!\!-\!\!\!-\!\!\!-\!\!\bullet} \hspace{0.2cm} \eta_{\rm VD}(\tau, f_{\rm D})\hspace{0.05cm}.$$
  
*Dementsprechend ist $\eta_{\rm VZ}(\tau,\hspace{0.05cm} t)$ für alle Werte von $\tau$ identisch $0$, für die auch in der Scatter&ndash;Funktion $\eta_{\rm VD}(\tau, f_{\rm D})$ keine Anteile zu erkennen sind.  
+
*Accordingly,&nbsp; $\eta_{\rm VZ}(\tau,\hspace{0.05cm} t)=0$&nbsp; for the values of&nbsp; $\tau$&nbsp; that make&nbsp; $\eta_{\rm VD}(\tau, f_{\rm D})=0$.  
*Richtig sind also die <u>Lösungsvorschläge 1 und 2</u>: Nur für $\tau = 0$ und $\tau = 1 \ \rm \mu s$ besitzt die zeitvariante Impulsantwort endliche Werte.
+
*Correct are therefore the <u>solutions 1 and 2</u>:&nbsp; <br>Only for&nbsp; $\tau = 0$&nbsp; and&nbsp; $\tau = 1 \ \ \rm \mu s$&nbsp; does the time-variant impulse response have non-zero values.
  
  
  
'''(2)'''&nbsp; Für die Verzögerung $\tau = 0$ besteht die Scatter&ndash;Funktion ($\eta_{\rm VD}$) aus einem einzigen Dirac bei $f_{\rm D} = 100 \ \rm Hz$.  
+
'''(2)'''&nbsp; For the delay&nbsp; $\tau = 0$, the scatter function&nbsp; $\eta_{\rm VD}$&nbsp; consists of a single Dirac at $f_{\rm D} = 100 \ \rm Hz$.  
*Für die gesuchte Zeitfunktion gilt gemäß dem zweiten Fourierintegral:
+
*According to the second Fourier integral, the desired time-domain function satisfies:
 
:$$\eta_{\rm VZ}(\tau = 0, t) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac{1}{\sqrt{2}} \cdot \int\limits_{-\infty}^{+\infty} \delta (f_{\rm D} - 100\,{\rm Hz}) \cdot {\rm e}^{{\rm j}\hspace{0.05cm}\cdot\hspace{0.05cm} 2 \pi f_{\rm D} t}\hspace{0.15cm}{\rm d}f_{\rm D} =\frac{1}{\sqrt{2}} \cdot {\rm e}^{ {\rm j}\hspace{0.05cm}\cdot \hspace{0.05cm}2 \pi  t \hspace{0.05cm}\cdot \hspace{0.05cm}100\,{\rm Hz}} .$$
 
:$$\eta_{\rm VZ}(\tau = 0, t) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac{1}{\sqrt{2}} \cdot \int\limits_{-\infty}^{+\infty} \delta (f_{\rm D} - 100\,{\rm Hz}) \cdot {\rm e}^{{\rm j}\hspace{0.05cm}\cdot\hspace{0.05cm} 2 \pi f_{\rm D} t}\hspace{0.15cm}{\rm d}f_{\rm D} =\frac{1}{\sqrt{2}} \cdot {\rm e}^{ {\rm j}\hspace{0.05cm}\cdot \hspace{0.05cm}2 \pi  t \hspace{0.05cm}\cdot \hspace{0.05cm}100\,{\rm Hz}} .$$
  
*Richtig ist demzufolge der <u>Lösungsvorschlag 1</u>.
+
*Correct is <u>solution 1</u>.
  
  
  
'''(3)'''&nbsp; Bei der Verzögerungszeit $\tau = 1 \ \rm &micro; s$ besteht die Verzögerungs&ndash;Doppler&ndash;Funktion dagegen aus zwei Diracfunktionen bei $&plusmn;50 \ \rm Hz$, jeweils mit dem Gewicht $-0.5$.  
+
'''(3)'''&nbsp; For the delay&nbsp;  $\tau = 1 \ \ \rm &micro; s$&nbsp; the delay&ndash;Doppler function consists of two Dirac functions at&nbsp; $&plusmn;50 \ \rm Hz$, each with weight&nbsp; $-0.5$.  
*Die Zeitfunktion ergibt sich damit zu
+
*The time function is&nbsp;  $\eta_{\rm VZ}(\tau = 1\,{\rm \mu s}, t) = - \cos( 2 \pi t \cdot 50\,{\rm Hz})\hspace{0.05cm}.$
:$$\eta_{\rm VZ}(\tau = 1\,{\rm \mu s}, t) = - \cos( 2 \pi t \cdot 50\,{\rm Hz})\hspace{0.05cm}.$$
 
  
*Diese Funktion lässt sich mit $A = -1$ und $f_0 = 50 \ \rm Hz$ gemäß <u>Lösungsvorschlag 2</u> darstellen.
+
*This function can be represented with&nbsp; $A = -1$&nbsp; and&nbsp; $f_0 = 50 \ \rm Hz$&nbsp; according to <u>solution 2</u>.
  
  
  
'''(4)'''&nbsp; Die drei Diracfunktionen $\eta_{\rm VD}(\tau, \hspace{0.05cm}f_{\rm D})$ liegen bei den Dopplerfrequenzen $+100 \ \rm Hz$, $+50 \ \rm Hz$ und $-50 \ \rm Hz$.  
+
'''(4)'''&nbsp; The three Dirac functions&nbsp; $\eta_{\rm VD}(\tau, \hspace{0.05cm}f_{\rm D})$&nbsp; are at the Doppler frequencies&nbsp; $+100 \ \rm Hz$, $+50 \ \rm Hz$&nbsp; and&nbsp; $-50 \ \rm Hz$.  
*Für alle anderen Dopplerfrequenzen muss deshalb auch $\eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D}) \equiv 0$ sein.  
+
*For all other Doppler frequencies, we must have&nbsp; $\eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D}) \equiv 0$.  
*Richtig ist hier also der <u>Lösungsvorschlag 2</u>.
+
*<u>Solution 2</u> is correct.
  
  
  
'''(5)'''&nbsp; Betrachtet man die Scatter&ndash;Funktion $\eta_{\rm VD}(\tau, \hspace{0.05cm}f_{\rm D})$ in Richtung der $\tau$&ndash;Achse, so erkennt man bei den Dopplerfrequenzen $100 \ \rm Hz$ und $&plusmn;50 \ \rm Hz$ nur jeweils eine Diracfunktion.  
+
'''(5)'''&nbsp; If you look at the scatter function&nbsp; $\eta_{\rm VD}(\tau, \hspace{0.05cm}f_{\rm D})$&nbsp; in the direction of the&nbsp; $\tau$&ndash;axis, there is one Dirac function at each of the Doppler frequencies&nbsp; $100 \ \rm Hz$&nbsp; and&nbsp; $&plusmn;50 \ \rm Hz$.  
*Hier ergeben sich in Abhängigkeit von $f$ jeweils komplexe Exponentialschwingungen mit konstantem Betrag (woraus folgt, dass der <u>Lösungsvorschlag 1</u> richtig ist):
+
*Here, depending on $f$,&nbsp; complex exponential oscillations with constant magnitude result in each case&nbsp; (from which it follows that <u>solution 1</u> is correct):
 
:$$|\eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D} = 100\,{\rm Hz})| \hspace{-0.1cm} \ = \ \hspace{-0.1cm} {1}/{\sqrt{2}} = {\rm const.}$$
 
:$$|\eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D} = 100\,{\rm Hz})| \hspace{-0.1cm} \ = \ \hspace{-0.1cm} {1}/{\sqrt{2}} = {\rm const.}$$
 
:$$| \eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D}= \pm 50\,{\rm Hz})| \hspace{-0.1cm} \ = \ \hspace{-0.1cm} 0.5 = {\rm const.}$$
 
:$$| \eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D}= \pm 50\,{\rm Hz})| \hspace{-0.1cm} \ = \ \hspace{-0.1cm} 0.5 = {\rm const.}$$
Line 114: Line 117:
  
  
[[File:P_ID2168__Mob_A_2_5e_neu.png|right|frame|Zusammenhang aller Systemfunktionen]]
+
[[File:P_ID2168__Mob_A_2_5e_neu.png|right|frame|Relationships between all system functions]]
'''(6)'''&nbsp; Wie aus der angegebenen [[Mobile_Kommunikation/Das_GWSSUS%E2%80%93Kanalmodell#Verallgemeinerte_Systemfunktionen_zeitvarianter_Systeme|Grafik]] zu ersehen, treffen die <u>Lösungsalternativen 2 und 3</u> zu.
+
'''(6)'''&nbsp; As can be seen from the given [[Mobile_Communications/The_GWSSUS_Channel_Model#Generalized_system_functions_of_time_variant_systems|graph]], <u>solutions 2 and 3</u> are correct.
  
*Die Grafik zeigt alle Systemfunktionen.  
+
*The graph shows all system functions.  
*Die Fourierkorrespondenzen (grün eingezeichnet) verdeutlichen die Zusammenhänge zwischen diesen Systemfunktionen.
+
*The Fourier correspondences (shown in green) illustrate the relationships between these system functions.
  
  
  
''Hinweis:''  
+
''Note:''  
  
Vergleichen Sie die zeitvariante Übertragungsfunktion $|\eta_{\rm FZ}(f, \hspace{0.05cm} t)|$ im Bild unten rechts mit der entsprechenden Grafik für  [[Aufgaben:Aufgabe_2.4:_2D-Übertragungsfunktion| Aufgabe 2.4]]:  
+
Compare the time-variant transfer function&nbsp; $|\eta_{\rm FZ}(f, \hspace{0.05cm} t)|$&nbsp; in the bottom right figure with the corresponding graph in&nbsp; [[Aufgaben:Exercise_2.4:_2-D_Transfer_Function| Exercise 2.4]]:  
*Die jeweils dargestellten Betragsfunktionen unterscheiden sich signifikant, obwohl $|\eta_{\rm VZ}(\tau, t)|$ in beiden Fällen gleich ist.  
+
*The respective magnitude functions differ significantly, although&nbsp; $|\eta_{\rm VZ}(\tau, t)|$&nbsp; is the same in both cases.  
*In der Aufgabe 2.4 wurde für $\eta_{\rm VZ}(\tau = 1 \ {\rm &micro; s}, t)$ implizit ein Cosinus vorausgesetzt, hier eine Minus&ndash;Cosinusfunktion.  
+
*In Exercise 2.4, a cosine was implicitly assumed for&nbsp; $\eta_{\rm VZ}(\tau = 1 \ {\rm &micro; s}, t)$;&nbsp; here we have a negative cosine function.  
*Die (nicht explizit) angegebene Verzögerungs&ndash;Dopplerfunktion für die Aufgabe 2.4 lautete:
+
*The (not explicitly) specified delay&ndash;Doppler function for Exercise 2.4 was
 
:$$\eta_{\rm VD}(\tau, f_{\rm D}) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac{1}{\sqrt{2}} \cdot \delta (\tau) \cdot \delta (f_{\rm D} - 100\,{\rm Hz})+$$
 
:$$\eta_{\rm VD}(\tau, f_{\rm D}) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac{1}{\sqrt{2}} \cdot \delta (\tau) \cdot \delta (f_{\rm D} - 100\,{\rm Hz})+$$
 
:$$\hspace{2cm}+\hspace{0.22cm}\frac{1}{2} \cdot \delta (\tau- 1\,{\rm \mu s}) \cdot \delta (f_{\rm D} - 50\,{\rm Hz})+ $$
 
:$$\hspace{2cm}+\hspace{0.22cm}\frac{1}{2} \cdot \delta (\tau- 1\,{\rm \mu s}) \cdot \delta (f_{\rm D} - 50\,{\rm Hz})+ $$
Line 133: Line 136:
 
  \hspace{0.05cm}.$$
 
  \hspace{0.05cm}.$$
  
*Ein Vergleich mit der Gleichung auf der [[Aufgaben:2.5_Scatter-Funktion|Angabenseite]] zeigt, dass sich nur die Vorzeichen der Diracs bei $\tau = 1 \ \rm &micro; s$ geändert haben.
+
*Comparison with the equation in this task shows that only the signs of the Diracs have changed at&nbsp; $\tau = 1 \ \rm &micro; s$.
 
{{ML-Fuß}}
 
{{ML-Fuß}}
  
Line 139: Line 142:
  
  
[[Category:Exercises for Mobile Communications|^2.3 The GWSSUS&ndash;Channel Model^]]
+
[[Category:Mobile Communications: Exercises|^2.3 The GWSSUS Channel Model^]]

Latest revision as of 14:37, 23 March 2021

Delay-Doppler profile

For the mobile radio channel as a time-variant system, there are a total of four system functions that are linked with each other via the Fourier transform.  With the nomenclature from our tutorial, these are:

  • the time-variant impulse response  $h(\tau, \hspace{0.05cm}t)$, which we also denote here as  $\eta_{\rm VZ}(\tau,\hspace{0.05cm} t)$,
  • the delay-Doppler function  $\eta_{\rm VD}(\tau,\hspace{0.05cm} f_{\rm D})$,
  • the frequency-Doppler function  $\eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D})$,
  • the time-variant transfer function  $\eta_{\rm FZ}(f,\hspace{0.05cm}t)$  or  $H(f, \hspace{0.05cm}t)$.


The four possible system functions are uniformly denoted by  $\boldsymbol{\eta}_{12}$ .

  • The first subindex is either a  $\boldsymbol{\rm V}$  $($because of German  $\rm V\hspace{-0.05cm}$erzögerung   ⇒   delay time  $\tau)$  or  a  $\boldsymbol{\rm F}$  $($frequency  $f)$.
  • Either a  $\boldsymbol{\rm Z}$  $($because of German  $\rm Z\hspace{-0.05cm}$eit   ⇒   time  $t)$  or a  $\boldsymbol{\rm D}$  $($Doppler frequency  $f_{\rm D})$  is possible as the second subindex.


The delay–Doppler function  $\eta_{\rm VD}(\tau,\hspace{0.05cm} f_{\rm D})$  is shown in the plot:

$$\eta_{\rm VD}(\tau, f_{\rm D}) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac{1}{\sqrt{2}} \cdot \delta (\tau) \cdot \delta (f_{\rm D} - 100\,{\rm Hz})-$$
$$\hspace{1.75cm} \ - \ \hspace{-0.1cm} \frac{1}{2} \cdot \delta (\tau- 1\,{\rm \mu s}) \cdot \delta (f_{\rm D} - 50\,{\rm Hz})- \frac{1}{2} \cdot \delta (\tau- 1\,{\rm \mu s}) \cdot \delta (f_{\rm D} + 50\,{\rm Hz}) \hspace{0.05cm}.$$

In the literature,  $\eta_{\rm VD}(\tau, \hspace{0.05cm}f_{\rm D})$  is often also called  scatter function  and denoted with  $s(\tau, \hspace{0.05cm}f_{\rm D})$ .

In this task, the associated delay–time function  $\eta_{\rm VZ}(\tau, \hspace{0.05cm}t)$  and the frequency–Doppler function  $\eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D})$  are to be determined.




Notes:

  • This exercise should clarify the subject matter of the chapter  The GWSSUS Channel Model.
  • The relationship between the individual system functions is given in the  graph on the first page  of this chapter.
  • Note that the magnitude function  $|\eta_{\rm VD}(\tau, \hspace{0.05cm} f_{\rm D})|$  is shown above, so negative weights of the Dirac functions cannot be recognized.


Questionnaire

1

At which values of  $\tau$  there are the components of 2D impulse response  $\eta_{\rm VZ}(\tau, \hspace{0.05cm}t)$ ?

$\tau = 0$,
$\tau = 1 \ \rm µ s$,
other $\tau$–values.

2

Calculate  $|\eta_{\rm VZ}(\tau = 0,\hspace{0.05cm}t)|$.  Which of the following statements are true?

$|\eta_{\rm VZ}(\tau = 0,\hspace{0.05cm} t)|$  is independent of  $t$.
  $\eta_{\rm VZ}(\tau = 0, \hspace{0.05cm}t) = A \cdot \cos {(2\pi f_0 t)}$.
  $\eta_{\rm VZ}(\tau = 0, \hspace{0.05cm}t) = A \cdot \sin {(2\pi f_0 t)}$.

3

Calculate  $|\eta_{\rm VZ}(\tau = 1 \ {\rm µ s},\hspace{0.05cm} t)|$.  Which of the following statements are true?

$|\eta_{\rm VZ}(\tau = 1 \ {\rm µ s},\hspace{0.05cm} t)|$  is independent of  $t$.
  $\eta_{\rm VZ}(\tau = 1 \ {\rm µ s}, \hspace{0.05cm}t) = A \cdot \cos {(2\pi f_0 t)}$.
  $\eta_{\rm VZ}(\tau = 1 \ {\rm µ s}, \hspace{0.05cm}t) = A \cdot \sin {(2\pi f_0 t)}$.

4

Consider the frequency–Doppler representation  $\eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D})$.  For which values of  $f_{\rm D}$ is this function not equal to zero?

$f_{\rm D} = 0$,
$f_{\rm D} = ± 50 \ \rm Hz$,
$f_{\rm D} = ± 100 \ \rm Hz$.

5

Which of the following statements are true for  $\eta_{\rm FD}(f,\hspace{0.05cm} f_{\rm D})$?

$|\eta_{\rm FD}(f,\hspace{0.05cm} f_{\rm D} = 100 \ \rm Hz)|$  is independent of $f_{\rm D}$.
  $\eta_{\rm FD}(f, \hspace{0.05cm} f_{\rm D} = 50 \ {\rm Hz}) = A \cdot \cos {(2\pi t_0 f)}$.
  $\eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D} = 50 \ {\rm Hz}) = A \cdot \sin {(2\pi t_0 f)}$.

6

How do you get the time-variant transfer function  $\eta_{\rm FZ}(f, \hspace{0.05cm}t)$?

By Fourier transformation of  $\eta_{\rm VD}(\tau,\hspace{0.05cm} f_{\rm D})$  with respect to  $\tau$.
By Fourier transformation of  $\eta_{\rm VZ}(\tau, \hspace{0.05cm}t)$  with respect to  $\tau$.
By inverse Fourier transformation of  $\eta_{\rm FD}(f,\hspace{0.05cm} f_{\rm D})$  with respect to $f_{\rm D}$.


Solution

(1)  The time-variant impulse response  $h(\tau, \hspace{0.05cm} t) = \eta_{\rm VZ}(\tau, \hspace{0.05cm} t)$  is the inverse Fourier transform of the delay–Doppler function  $\eta_{\rm VD}(\tau,\hspace{0.05cm} f_{\rm D}) = s(\tau, \hspace{0.05cm} f_{\rm D})$:

$$\eta_{\rm VZ}(\tau, \hspace{0.05cm} t) \hspace{0.2cm} \stackrel{t, \hspace{0.02cm}f_{\rm D}}{\circ\!\!-\!\!\!-\!\!\!-\!\!\bullet} \hspace{0.2cm} \eta_{\rm VD}(\tau, f_{\rm D})\hspace{0.05cm}.$$
  • Accordingly,  $\eta_{\rm VZ}(\tau,\hspace{0.05cm} t)=0$  for the values of  $\tau$  that make  $\eta_{\rm VD}(\tau, f_{\rm D})=0$.
  • Correct are therefore the solutions 1 and 2
    Only for  $\tau = 0$  and  $\tau = 1 \ \ \rm \mu s$  does the time-variant impulse response have non-zero values.


(2)  For the delay  $\tau = 0$, the scatter function  $\eta_{\rm VD}$  consists of a single Dirac at $f_{\rm D} = 100 \ \rm Hz$.

  • According to the second Fourier integral, the desired time-domain function satisfies:
$$\eta_{\rm VZ}(\tau = 0, t) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac{1}{\sqrt{2}} \cdot \int\limits_{-\infty}^{+\infty} \delta (f_{\rm D} - 100\,{\rm Hz}) \cdot {\rm e}^{{\rm j}\hspace{0.05cm}\cdot\hspace{0.05cm} 2 \pi f_{\rm D} t}\hspace{0.15cm}{\rm d}f_{\rm D} =\frac{1}{\sqrt{2}} \cdot {\rm e}^{ {\rm j}\hspace{0.05cm}\cdot \hspace{0.05cm}2 \pi t \hspace{0.05cm}\cdot \hspace{0.05cm}100\,{\rm Hz}} .$$
  • Correct is solution 1.


(3)  For the delay  $\tau = 1 \ \ \rm µ s$  the delay–Doppler function consists of two Dirac functions at  $±50 \ \rm Hz$, each with weight  $-0.5$.

  • The time function is  $\eta_{\rm VZ}(\tau = 1\,{\rm \mu s}, t) = - \cos( 2 \pi t \cdot 50\,{\rm Hz})\hspace{0.05cm}.$
  • This function can be represented with  $A = -1$  and  $f_0 = 50 \ \rm Hz$  according to solution 2.


(4)  The three Dirac functions  $\eta_{\rm VD}(\tau, \hspace{0.05cm}f_{\rm D})$  are at the Doppler frequencies  $+100 \ \rm Hz$, $+50 \ \rm Hz$  and  $-50 \ \rm Hz$.

  • For all other Doppler frequencies, we must have  $\eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D}) \equiv 0$.
  • Solution 2 is correct.


(5)  If you look at the scatter function  $\eta_{\rm VD}(\tau, \hspace{0.05cm}f_{\rm D})$  in the direction of the  $\tau$–axis, there is one Dirac function at each of the Doppler frequencies  $100 \ \rm Hz$  and  $±50 \ \rm Hz$.

  • Here, depending on $f$,  complex exponential oscillations with constant magnitude result in each case  (from which it follows that solution 1 is correct):
$$|\eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D} = 100\,{\rm Hz})| \hspace{-0.1cm} \ = \ \hspace{-0.1cm} {1}/{\sqrt{2}} = {\rm const.}$$
$$| \eta_{\rm FD}(f, \hspace{0.05cm}f_{\rm D}= \pm 50\,{\rm Hz})| \hspace{-0.1cm} \ = \ \hspace{-0.1cm} 0.5 = {\rm const.}$$


Relationships between all system functions

(6)  As can be seen from the given graph, solutions 2 and 3 are correct.

  • The graph shows all system functions.
  • The Fourier correspondences (shown in green) illustrate the relationships between these system functions.


Note:

Compare the time-variant transfer function  $|\eta_{\rm FZ}(f, \hspace{0.05cm} t)|$  in the bottom right figure with the corresponding graph in  Exercise 2.4:

  • The respective magnitude functions differ significantly, although  $|\eta_{\rm VZ}(\tau, t)|$  is the same in both cases.
  • In Exercise 2.4, a cosine was implicitly assumed for  $\eta_{\rm VZ}(\tau = 1 \ {\rm µ s}, t)$;  here we have a negative cosine function.
  • The (not explicitly) specified delay–Doppler function for Exercise 2.4 was
$$\eta_{\rm VD}(\tau, f_{\rm D}) \hspace{-0.1cm} \ = \ \hspace{-0.1cm} \frac{1}{\sqrt{2}} \cdot \delta (\tau) \cdot \delta (f_{\rm D} - 100\,{\rm Hz})+$$
$$\hspace{2cm}+\hspace{0.22cm}\frac{1}{2} \cdot \delta (\tau- 1\,{\rm \mu s}) \cdot \delta (f_{\rm D} - 50\,{\rm Hz})+ $$
$$\hspace{2cm}+\hspace{0.22cm} \frac{1}{2} \cdot \delta (\tau- 1\,{\rm \mu s}) \cdot \delta (f_{\rm D} + 50\,{\rm Hz}) \hspace{0.05cm}.$$
  • Comparison with the equation in this task shows that only the signs of the Diracs have changed at  $\tau = 1 \ \rm µ s$.