Difference between revisions of "Aufgaben:Exercise 3.4: Trapezoidal Spectrum and Pulse"

From LNTwww
Line 5: Line 5:
 
[[File:P_ID508__Sig_A_3_4.png|250px|right|frame|Trapezspektrum & Trapezimpuls]]
 
[[File:P_ID508__Sig_A_3_4.png|250px|right|frame|Trapezspektrum & Trapezimpuls]]
  
Wir betrachten hier eine trapezförmige Spektralfunktion  $X(f)$  gemäß der oberen Grafik, die durch die drei Parameter  $X_0$,  $f_1$  und  $f_2$  vollständig beschrieben wird. Für die beiden Eckfrequenzen gelte stets   $f_2 > 0$  und  $0 \leq f_1 \leq f_2$.
+
We consider here a trapezoidal spectral function  $X(f)$  according to the upper graph, which is completely described by the three parameters  $X_0$,  $f_1$  and  $f_2$ . For the two corner frequencies,   $f_2 > 0$  and  $0 \leq f_1 \leq f_2$ always apply.
  
Anstelle der Eckfrequenzen  $f_1$  und  $f_2$  können auch die beiden folgenden Beschreibungsgrößen verwendet werden:
+
Instead of the corner frequencies  $f_1$  and  $f_2$ , the following two descriptive variables can also be used:
*die  [[Signal_Representation/Fourier_Transform_Laws#Reziprozit.C3.A4tsgesetz_von_Zeitdauer_und_Bandbreite|äquivalente Bandbreite]]:
+
*the  [[Signal_Representation/Fourier_Transform_Laws#Reciprocity_Theorem_of_Time_duration_and_Bandwidth|equivalent bandwidth]]:
 
:$$\Delta f = f_1  + f_2,$$
 
:$$\Delta f = f_1  + f_2,$$
*der so genannte  [[Linear_and_Time_Invariant_Systems/Einige_systemtheoretische_Tiefpassfunktionen#Trapez.E2.80.93Tiefpass|Rolloff-Faktor]]  (im Frequenzbereich):
+
*the so-called  [[Linear_and_Time_Invariant_Systems/Einige_systemtheoretische_Tiefpassfunktionen#Trapez.E2.80.93Tiefpass|rolloff factor]]  (in the frequency domain):
 
:$$r_f = \frac{ {f_2  - f_1 }}{ {f_2  + f_1 }}.$$
 
:$$r_f = \frac{ {f_2  - f_1 }}{ {f_2  + f_1 }}.$$
  
Mit diesen Größen lautet die dazugehörige Zeitfunktion (siehe mittlere Grafik):
+
With these quantities, the associated time function (see middle graph) is:-
 
   
 
   
 
:$$x( t ) = X_0  \cdot \Delta f \cdot {\mathop{\rm si}\nolimits} ( { {\rm \pi}  \cdot \Delta f \cdot t} ) \cdot {\mathop{\rm si}\nolimits} ( { {\rm \pi}  \cdot  r_f \cdot \Delta f\cdot t} ).$$
 
:$$x( t ) = X_0  \cdot \Delta f \cdot {\mathop{\rm si}\nolimits} ( { {\rm \pi}  \cdot \Delta f \cdot t} ) \cdot {\mathop{\rm si}\nolimits} ( { {\rm \pi}  \cdot  r_f \cdot \Delta f\cdot t} ).$$
  
Hierbei ist  $\text{si}(x) = \text{sin}(x)/x$  die so genannte Spaltfunktion.
+
Here  $\text{si}(x) = \text{sin}(x)/x$  is the so-called splitting function.
  
In diesem Beispiel sollen die Zahlenwerte  $X_0 = 10^{–3}\,\text{V/Hz}$,  $f_1 = 1\,\text{kHz}$  und  $f_2 = 3\,\text{kHz}$  verwendet werden. Die Zeit  $T = 1/\Delta f$  dient lediglich zu Normierungszwecken.
+
In this example, the numerical values  $X_0 = 10^{–3}\,\text{V/Hz}$,  $f_1 = 1\,\text{kHz}$  and  $f_2 = 3\,\text{kHz}$  are to be used. The time  $T = 1/\Delta f$  is only used for standardisation purposes.
 +
From subtask  '''(3)'''   a trapezoidal signal  $y(t)$  is considered, which is identical in shape to the spectrum  $X(f)$ .
  
Ab Teilaufgabe  '''(3)'''  wird ein trapezförmiges Signal  $y(t)$  betrachtet, das formgleich mit dem Spektrum  $X(f)$  ist.
+
The following can be used here as descriptive variables:
 
+
*the pulse amplitude  $y_0 = y(t = 0)$,
Als Beschreibungsgrößen können hier verwendet werden:
+
*the  [[Signal_Representation/Fourier_Transform_Laws#Reciprocity_Theorem_of_Time_duration_and_Bandwidth|equivalent pulse duration]]  (defined via the rectangle with the same area):
*die Impulsamplitude  $y_0 = y(t = 0)$,
 
*die  [[Signal_Representation/Fourier_Transform_Laws#Reziprozit.C3.A4tsgesetz_von_Zeitdauer_und_Bandbreite|äquivalente Impulsdauer]]  (definiert über das flächengleiche Rechteck):
 
 
   
 
   
 
:$$\Delta t = t_1  + t_2,$$
 
:$$\Delta t = t_1  + t_2,$$
  
*der Rolloff-Faktor (im Zeitbereich) mit vergleichbarer Definition wie  $r_f$:
+
*the rolloff factor (in the time domain) with comparable definition as  $r_f$:
 
   
 
   
 
:$$r_t = \frac{ {t_2  - t_1 }}{ {t_2  + t_1 }}.$$
 
:$$r_t = \frac{ {t_2  - t_1 }}{ {t_2  + t_1 }}.$$
  
Es gelte  $y_0 = 4\,\text{V}$,  $\Delta t = 1\,\text{ms}$  und  $r_t = 0.5$.
+
Let  $y_0 = 4\,\text{V}$,  $\Delta t = 1\,\text{ms}$  and  $r_t = 0.5$.
  
  

Revision as of 20:36, 23 January 2021

Trapezspektrum & Trapezimpuls

We consider here a trapezoidal spectral function  $X(f)$  according to the upper graph, which is completely described by the three parameters  $X_0$,  $f_1$  and  $f_2$ . For the two corner frequencies,  $f_2 > 0$  and  $0 \leq f_1 \leq f_2$ always apply.

Instead of the corner frequencies  $f_1$  and  $f_2$ , the following two descriptive variables can also be used:

$$\Delta f = f_1 + f_2,$$
$$r_f = \frac{ {f_2 - f_1 }}{ {f_2 + f_1 }}.$$

With these quantities, the associated time function (see middle graph) is:-

$$x( t ) = X_0 \cdot \Delta f \cdot {\mathop{\rm si}\nolimits} ( { {\rm \pi} \cdot \Delta f \cdot t} ) \cdot {\mathop{\rm si}\nolimits} ( { {\rm \pi} \cdot r_f \cdot \Delta f\cdot t} ).$$

Here  $\text{si}(x) = \text{sin}(x)/x$  is the so-called splitting function.

In this example, the numerical values  $X_0 = 10^{–3}\,\text{V/Hz}$,  $f_1 = 1\,\text{kHz}$  and  $f_2 = 3\,\text{kHz}$  are to be used. The time  $T = 1/\Delta f$  is only used for standardisation purposes. From subtask  (3)  a trapezoidal signal  $y(t)$  is considered, which is identical in shape to the spectrum  $X(f)$ .

The following can be used here as descriptive variables:

$$\Delta t = t_1 + t_2,$$
  • the rolloff factor (in the time domain) with comparable definition as  $r_f$:
$$r_t = \frac{ {t_2 - t_1 }}{ {t_2 + t_1 }}.$$

Let  $y_0 = 4\,\text{V}$,  $\Delta t = 1\,\text{ms}$  and  $r_t = 0.5$.





Hinweise:



Fragebogen

1

Wie groß sind bei den gegebenen Parametern die äquivalente Bandbreite und der Rolloff-Faktor des Spektrums  $X(f)$?

$\Delta f \ = \ $

 $\text{kHz}$
$r_f \hspace{0.35cm} = \ $

2

Wie groß sind die Signalwerte von  $x(t)$  bei  $t = 0$,  $t = T$  und  $t = T/2$?

$x(t=0)\hspace{0.2cm} = \ $

 $\text{V}$
$x(t=T)\ = \ $

 $\text{V}$
$x(t=T/2)\ = \ $

 $\text{V}$

3

Wie lautet das Spektrum  $Y(f)$  des Trapezimpulses mit  $y_0 = 4\,\text{V}$,  $\Delta t = 1\,\text{ms}$  und  $r_t = 0.5$?
Wie groß sind die Spektralwerte bei den angegebenen Frequenzen?

$Y(f = 0)\hspace{0.2cm} = \ $

 $\text{mV/Hz}$
$Y(f = 0.5 \,\text{kHz})\ = \ $

 $\text{mV/Hz}$
$Y(f = 1.0 \,\text{kHz})\ = \ $

 $\text{mV/Hz}$

4

Welche Spektralwerte ergeben sich mit  $y_0 = 8\,\text{V}$,  $\Delta t = 0.5\,\text{ms }$  und  $r_t = 0.5$?

$Y(f=0)\hspace{0.2cm}= \ $

 $\text{mV/Hz}$
$Y(f=1.0 \,\text{kHz})\ = \ $

 $\text{mV/Hz}$


Musterlösung

(1)  Die äquivalente Bandbreite ist per Definition gleich der Breite des flächengleichen Rechtecks:

$$\Delta f = f_1 + f_2 \hspace{0.15 cm}\underline{= 4\;{\rm{kHz}}}{\rm{.}}$$
  • Für den Rolloff-Faktor gilt:
$${ {r_f = }}\frac{ {f_2 - f_1 }}{ {f_2 + f_1 }}\hspace{0.15 cm}\underline{ = 0.5}.$$


(2)  Der Maximalwert des Impulses  $x(t)$  tritt zum Zeitpunkt  $t = 0$  auf:

$$x_0 = x(t = 0) = X_0 \cdot \Delta f \hspace{0.15 cm}\underline{= 4\, \text{V}}.$$
  • Zum Zeitpunkt  $t = T = 1/\Delta f$  gilt aufgrund von  $\text{si}(\pi) = 0$:
$$x( {t = T} ) = x_0 \cdot {\mathop{\rm si}\nolimits} ( {\rm{\pi }} ) \cdot {\mathop{\rm si}\nolimits} ( { { {\rm{\pi }}}/{2}} )\hspace{0.15 cm}\underline{ = 0}.$$
  • Auch bei allen Vielfachen von  $T$  weist  $x(t)$  Nulldurchgänge auf. Zum Zeitpunkt  $t = T/2$  gilt:
$$x( {t = T/2} ) = x_0 \cdot {\mathop{\rm si}\nolimits} ( { { {\rm{\pi }}}/{2}} ) \cdot {\mathop{\rm si}\nolimits}( { { {\rm{\pi }}}/{4}} ) = x_0 \cdot \frac{ { 1 \cdot \sqrt 2 /2}}{ { {\rm{\pi /}}2 \cdot {\rm{\pi /4}}}} = x_0 \cdot \frac{ {4 \cdot \sqrt 2 }}{ { {\rm{\pi }}^{\rm{2}} }} \hspace{0.15 cm}\underline{= 2.293\;{\rm{V}}}{\rm{.}}$$


(3)  Die zum trapezförmigen Spektrum  $X(f)$  zugehörige Zeitfunktion lautet entsprechend der Angabe:

$$x( t ) = X_0 \cdot \Delta f \cdot {\mathop{\rm si}\nolimits} ( { {\rm{\pi }} \cdot \Delta f \cdot t} ) \cdot {\mathop{\rm si}\nolimits} ( { {\rm{\pi }} \cdot r_f \cdot \Delta f \cdot t} ).$$
  • Da sowohl  $X(f)$  als auch  $x(t)$  reell sind und zudem  $y(t)$  formgleich mit  $X(f)$  ist, erhält man unter Berücksichtigung aller Äquivalenzen für die Spektralfunktion des Trapezimpulses:
$$Y( f ) = y_0 \cdot \Delta t \cdot {\mathop{\rm si}\nolimits} ( { {\rm{\pi }} \cdot \Delta t \cdot f} ) \cdot {\mathop{\rm si}\nolimits} ( { {\rm{\pi }} \cdot r_t \cdot \Delta t \cdot f} ).$$
  • Insbesondere gilt:
$$Y( {f = 0} ) = y_0 \cdot \Delta t \hspace{0.15 cm}\underline{= 4 \;{\rm{mV/Hz}}}{\rm{,}}$$
$$Y( {f = 0.5\;{\rm{kHz}}} ) = y_0 \cdot \Delta t \cdot {\mathop{\rm si}\nolimits} ( {{ {\rm{\pi }}}/{2}} ) \cdot {\mathop{\rm si}\nolimits} ( {{ {\rm{\pi }}}/{4}} ) \hspace{0.15 cm}\underline{= 2.293 \;{\rm{mV/Hz}}}{\rm{,}}$$
$$Y( {f = 1\;{\rm{kHz}}} ) = y_0 \cdot \Delta t \cdot {\mathop{\rm si}\nolimits} ( {\rm{\pi }} ) \cdot {\mathop{\rm si}\nolimits} ( {{ {\rm{\pi }}}/{2}} )\hspace{0.15 cm}\underline{ = 0}\;{\rm{.}}$$


(4)  Der Spektralwert bei der Frequenz  $f = 0$  wird nicht verändert:  

$$Y_0 = y_0 \cdot \Delta t \hspace{0.15 cm}\underline{= 4 \,\rm{mV/Hz}}.$$
  • Da nun aber die Zeitfunktion nur halb so breit ist, verbreitert sich das Spektrum um den Faktor  $2$:
$$Y( {f = 1\;{\rm{kHz}}} ) = Y_0 \cdot {\mathop{\rm si}\nolimits} ( {{ {\rm{\pi }}}/{2}} ) \cdot {\mathop{\rm si}\nolimits} ( {{ {\rm{\pi }}}/{4}} ) \hspace{0.15 cm}\underline{= 2.293\,{\rm{mV/Hz}}}{\rm{.}}$$
  • In der Teilaufgabe  (3)  ist dieser Spektralwert bei der Frequenz  $f = 0.5\,\rm{kHz}$  aufgetreten.