Difference between revisions of "Aufgaben:Exercise 4.4: Cellular UMTS Architecture"

From LNTwww
Line 5: Line 5:
  
 
[[File:P_ID1934__Bei_A_4_4.png|right|frame|UMTS cellular architecture]]
 
[[File:P_ID1934__Bei_A_4_4.png|right|frame|UMTS cellular architecture]]
Um ein flächendeckendes Netz mit geringer Sendeleistung und ausreichender Frequenzökonomie zu ermöglichen, werden bei UMTS – wie auch bei [[Examples_of_Communication_Systems/General_Description_of_GSM|"GSM"]] – Funkzellen eingerichtet.
+
In order to enable a nationwide network with low transmission power and sufficient frequency economy, radio cells are set up for UMTS - as for [[Examples_of_Communication_Systems/General_Description_of_GSM|"GSM"]].
  
Für einfache Systemuntersuchungen geht man dabei von hexagonalen Zellen wie in der Grafik angedeutet aus. In Realität sind die Funkzellen unterschiedlich groß und zudem an die vorliegende Topologie und die Infrastruktur des Versorgungsgebietes angepasst.
+
For simple system studies, hexagonal cells are assumed as shown in the diagram. In reality, the radio cells vary in size and are also adapted to the existing topology and infrastructure of the coverage area.
  
Es gibt drei unterschiedliche Typen von Funkzellen mit einem hierarchischen Aufbau:
+
There are three different types of radio cells with a hierarchical structure:
*${\rm Makrozellen}$:   4 bis 6 km Durchmesser, Geschwindigkeiten bis zu 500 km/h erlaubt.
+
*${\rm Macrocells}$:   4 to 6 km in diameter, speeds up to 500 km/h allowed.
*${\rm Mikrozellen}$:   1 bis 2 km Durchmesser, maximal zulässige Geschwindigkeit 120 km/h.
+
*${\rm Microcells}$:   1 to 2 km in diameter, maximum speed allowed 120 km/h.
*${\rm Pikozelle}$:   Durchmesser bis 100 m, viele Teilnehmer, extrem hohes Datenaufkommen.
+
*${\rm Picocell}$:   diameter up to 100 m, many participants, extremely high data volume.
  
  
Eine Makrozelle kann möglicherweise eine Vielzahl von Mikro– und Pikozellen überlagern. Für eine Mikrozelle beträgt die maximale Datenrate $384 \ \rm kbit/s$ für die maximale Geschwindigkeit von $120 \ \rm km/h$. Mit den maximal zulässigen Datenraten in einer Makrozelle und einer Pikozelle beschäftigt sich die Teilaufgabe (1).
+
A macrocell can potentially overlay a large number of microcells and picocells. For a microcell, the maximum data rate is $384 \rm kbit/s$ for the maximum speed of $120 \rm km/h$. Subtask (1) deals with the maximum data rates allowed in a macrocell and a picocell.
 
 
Im Zusammenhang mit der zellularen Struktur von UMTS werden häufig Begriffe verwendet, die in dieser Aufgabe erklärt werden sollen:
 
*Intrazellinterferenz und Interzellinterferenz,
 
*Zellatmung,
 
*Handover.
 
  
 +
In connection with the cellular structure of UMTS, terms are often used which will be explained in this task:
 +
*intracell interference and intercell interference,
 +
*cell breathing,
 +
*handover.
  
  

Revision as of 03:40, 13 February 2023

UMTS cellular architecture

In order to enable a nationwide network with low transmission power and sufficient frequency economy, radio cells are set up for UMTS - as for "GSM".

For simple system studies, hexagonal cells are assumed as shown in the diagram. In reality, the radio cells vary in size and are also adapted to the existing topology and infrastructure of the coverage area.

There are three different types of radio cells with a hierarchical structure:

  • ${\rm Macrocells}$:   4 to 6 km in diameter, speeds up to 500 km/h allowed.
  • ${\rm Microcells}$:   1 to 2 km in diameter, maximum speed allowed 120 km/h.
  • ${\rm Picocell}$:   diameter up to 100 m, many participants, extremely high data volume.


A macrocell can potentially overlay a large number of microcells and picocells. For a microcell, the maximum data rate is $384 \rm kbit/s$ for the maximum speed of $120 \rm km/h$. Subtask (1) deals with the maximum data rates allowed in a macrocell and a picocell.

In connection with the cellular structure of UMTS, terms are often used which will be explained in this task:

  • intracell interference and intercell interference,
  • cell breathing,
  • handover.


Hints:


Questions

1

Which of the following statements are true?

UMTS (carrier frequency around $2 \ \rm GHz$) has larger radio cells than GSM (carrier frequency around $900 \ \rm MHz$).
The data rate is greater in a macrocell than in a microcell.
The data rate is greater in a picocell than in a microcell.

2

Are the following statements regarding interference correct?

Intracell interference occurs when multiple participants in the same cell use the same frequency channel.
Intercell interference occurs when the same frequency is used by subscribers in different cells.
In the scenario shown, intracell interference occurs when the frequencies $f_{1}$ and $f_{2}$ are the same.
In the scenario shown, intercell interference occurs when frequencies $f_{3}$ and $f_{4}$ are equal.

3

What is meant by cellular respiration?

If the number of active participants in the cell increases   ⇒   greater interference power, the cell radius is reduced.
The supply of subscribers at the edge of a busy cell is taken over by a less busy neighboring cell.
Cell breathing describes a mechanism for best matching the data rate to the current traffic.

4

Which of the following statements about handover are true?

The goal is to make the transition of a mobile subscriber from one cell to another appear to be uninterrupted.
Hard Handover is when the connection is abruptly switched to another connection.
In Soft Handover, the handover of a subscriber from one base station to another is gradual.


Solution

(1)  Only the last statement is correct:

  • Since the range of radio signals decreases with increasing frequency at the same transmission power, the radio cells at UMTS (carrier frequency around $2 \ \rm GHz$) are significantly smaller than at GSM (in the D-network around $900 \ \rm MHz$).
  • The maximum data rates for UMTS (which are more theoretical limits) are as follows for
  • a macro cell up to $144 \ \rm kbit/s$,
  • a picocell up to $2 \ \rm Mbit/s$.


(2)  Correct are all statements:

  • The two definitions for intracell and intercell interference are correct.
  • Applying these to the scenario at hand (graph on the information page), we see.
  • Intracell interference for $f_{1} = f_{2}$,
  • Intercell interference for $f_{3} = f_{4}$.
  • Intracell interference is more severe than Intercell interference because of the usually smaller distance of the interferers from the receiver, that is, it causes a smaller CIR (carrier-to-interference ratio).


(3)  Correct statements 1 and 2 are:

  • Cellular respiration is accurately described by the first two statements.
  • With fewer participants now transmitting on a frequency, the negative influence of intracell interference is reduced.
  • The participants in neighboring cells transmit on other frequencies and thus interfere much less.
  • An alternative to cell breathing would be to maintain the cell size but reduce the transmit power of all participants within the cell, but this also means a reduction in the reception quality.
  • The last proposed solution is simply wrong.


(4)  Correct are all statements:

  • For example, downlink data is split in the Radio Network Controller (RNC), broadcast over the participating "Node Bs", and reassembled in the mobile station.
  • With soft handover, a mobile can communicate with up to three base stations simultaneously.
  • This variant is of course superior to Hard Handover, but also involves greater effort.