Difference between revisions of "Aufgaben:Exercise 4.6: Locality Curve for SSB-AM"

From LNTwww
Line 3: Line 3:
 
}}
 
}}
  
[[File:P_ID764__Sig_A_4_6.png|250px|right|frame|Spektrum des analytischen Signals]]
+
[[File:P_ID764__Sig_A_4_6.png|250px|right|frame|spectrum of the analytical signal]]
  
 
We consider the analytical signal  $s_+(t)$  with the spectral function
 
We consider the analytical signal  $s_+(t)$  with the spectral function
Line 12: Line 12:
 
Here  $f_{50}$  and  $f_{60}$  are abbreviations for the frequencies  $50 \ \rm kHz$  and  $60 \ \rm kHz$ respectively.
 
Here  $f_{50}$  and  $f_{60}$  are abbreviations for the frequencies  $50 \ \rm kHz$  and  $60 \ \rm kHz$ respectively.
  
In this task, the course of the equivalent low-pass signal  $s_{\rm TP}(t)$  analysiert werden, das in diesem Tutorial auch als „Ortskurve” bezeichnet wird.
+
In this task, the course of the equivalent low-pass signal  $s_{\rm TP}(t)$  , which is also referred to as the „locus curve” in this tutorial.
*In den Teilaufgaben  '''(1)'''  bis  '''(3)'''  gehen wir davon aus, dass das Signal  $s(t)$  durch eine Einseitenband-Amplitudenmodulation des sinusförmigen Nachrichtensignals der Frequenz  $f_{\rm N} = 10 \ \text{ kHz}$  mit einem cosinusförmigen Träger bei  $f_{\rm T} = f_{50}$  entstanden ist, wobei nur das obere Seitenband übertragen wird („OSB-Modulation”).
+
*In subtasks  '''(1)'''  to  '''(3)'''  , we assume that the signal  $s(t)$  is produced by a single sideband amplitude modulation of the sinusoidal message signal of frequency  $f_{\rm N} = 10 \ \text{ kHz}$  with a cosinusoidal carrier at  $f_{\rm T} = f_{50}$  , whereby only the upper sideband is transmitted („USB modulation”).
*Dagegen wird bei der Teilaufgabe  '''(4)'''  von der Trägerfrequenz  $f_{\rm T} = f_{60}$  ausgegangen. Diese Annahme setzt voraus, dass eine USB-Modulation stattgefunden hat.
+
*In contrast, subtask  '''(4)'''  assumes the carrier frequency  $f_{\rm T} = f_{60}$ . This assumption presupposes that LSB modulation has taken place.
  
  
Line 23: Line 23:
  
  
''Hinweise:''  
+
''Hints:''  
*Die Aufgabe gehört zum  Kapitel  [[Signal_Representation/Equivalent_Low_Pass_Signal_and_Its_Spectral_Function|Äquivalentes Tiefpass-Signal und zugehörige Spektralfunktion]].
+
*This task belongs to the chapter  [[Signal_Representation/Equivalent_Low_Pass_Signal_and_Its_Spectral_Function|Equivalent Low Pass Signal and Its Spectral Function]].
 
   
 
   
*Sie können Ihre Lösung mit dem interaktiven Applet  [[Applets:Physikalisches_Signal_%26_Äquivalentes_TP-Signal|Physikalisches Signal & Äquivalentes TP-Signal]]   ⇒   Ortskurve überprüfen.
+
*You can check your solution with the interactive applet  [[Applets:Physikalisches_Signal_%26_Äquivalentes_TP-Signal|Physical signal & equivalent LP signal]]   ⇒   locus curve.
  
  
===Fragebogen===
+
===Questions===
  
 
<quiz display=simple>
 
<quiz display=simple>
{Geben Sie das äquivalente Tiefpass-Signal&nbsp; $s_{\rm TP}(t)$&nbsp; für die Trägerfrequenz&nbsp; $f_{\rm N} = 10 \ \text{ kHz}$&nbsp; an. Welche der folgenden Aussagen sind zutreffend?
+
{Give the equivalent low-pass signal&nbsp; $s_{\rm TP}(t)$&nbsp; for the carrier frequency&nbsp; $f_{\rm N} = 10 \ \text{ kHz}$&nbsp;. Which of the following statements are true?
 
|type="()"}
 
|type="()"}
- Die Ortskurve beschreibt eine Ellipse.
+
- The locus curve describes an ellipse.
+ Die Ortskurve beschreibt einen Kreis.
+
+ The locus curve describes a circle.
- Die Ortskurve beschreibt einen Kreisbogen.
+
- The locus curve describes an arc.
  
{Berechnen Sie die Betragsfunktion&nbsp; $a(t) = |s_{\rm TP}(t)|$. Wie groß ist der Wert&nbsp; $a_0$&nbsp; bei&nbsp; $t = 0$&nbsp; sowie der Minimal– und der Maximalwert des Betrags?
+
{Calculate the magnitude function&nbsp; $a(t) = |s_{\rm TP}(t)|$. What is the value of&nbsp; $a_0$&nbsp; at&nbsp; $t = 0$&nbsp; and the minimum and maximum values of the magnitude?
 
|type="{}"}
 
|type="{}"}
 
$a_{\text{min}}\ = \ $ { 0. }
 
$a_{\text{min}}\ = \ $ { 0. }
Line 45: Line 45:
  
  
{Berechnen Sie die Phasenfunktion&nbsp; $\phi(t)$. Wie groß sind die Phasenwerte bei&nbsp; $t = 0$&nbsp;  sowie bei&nbsp; $t=25 \ {\rm &micro;} \text{s}$? <br>Interpretieren Sie&nbsp; $\phi (t)$ im Bereich um&nbsp; $t=75 \ {\rm &micro;} \text{s}$.
+
{Calculate the phase function&nbsp; $\phi(t)$. What are the phase values at&nbsp; $t = 0$&nbsp;  and&nbsp; $t=25 \ {\rm &micro;} \text{s}$? <br>Interpret&nbsp; $\phi (t)$ in the range around&nbsp; $t=75 \ {\rm &micro;} \text{s}$.
 
|type="{}"}
 
|type="{}"}
$\phi(t=0 \ {\rm &micro;} \text{s})\ = \ $ { -46--44 } &nbsp;$\text{Grad}$
+
$\phi(t=0 \ {\rm &micro;} \text{s})\ = \ $ { -46--44 } &nbsp;$\text{deg}$
$\phi(t=25 \ {\rm &micro;} \text{s})\ = \ $ { 0. } &nbsp;$\text{Grad}$
+
$\phi(t=25 \ {\rm &micro;} \text{s})\ = \ $ { 0. } &nbsp;$\text{deg}$
$\phi(t=75 \ {\rm &micro;} \text{s})\ = \ $ { 0. } &nbsp;$\text{Grad}$
+
$\phi(t=75 \ {\rm &micro;} \text{s})\ = \ $ { 0. } &nbsp;$\text{deg}$
 
   
 
   
{Geben Sie das äquivalente Tiefpass-Signal&nbsp; $s_{\rm TP}(t)$&nbsp; für&nbsp; $f_{\rm T} = 60 \ \text{kHz} = f_{60}$&nbsp; an. Welche der folgenden Aussagen sind zutreffend?
+
{Give the equivalent low-pass signal&nbsp; $s_{\rm TP}(t)$&nbsp; für&nbsp; $f_{\rm T} = 60 \ \text{kHz} = f_{60}$&nbsp; an. Which of the following statements are true?
 
|type="[]"}
 
|type="[]"}
+ Die Ortskurve ist ein Kreis mit Radius&nbsp; $1$&nbsp; um den Mittelpunkt&nbsp; $(0, –{\rm j})$ .
+
+ The locus curve is a circle with radius&nbsp; $1$&nbsp; around the centre&nbsp; $(0, –{\rm j})$ .
- Es gilt nun&nbsp; $s_{\rm TP}(t = 0) = 1 + {\rm j}$.
+
- Now&nbsp; $s_{\rm TP}(t = 0) = 1 + {\rm j}$ applies.
+ Die Betragsfunktion&nbsp; $a(t)$&nbsp; ist gegenüber&nbsp; $f_{\rm T} = f_{50}$&nbsp; unverändert.
+
+ The magnitude function&nbsp; $a(t)$&nbsp; is unchanged compared to &nbsp; $f_{\rm T} = f_{50}$&nbsp;.
- Die Phasenfunktion&nbsp; $\phi (t)$&nbsp; ist gegenüber&nbsp; $f_{\rm T} = f_{50}$&nbsp; unverändert.
+
- The phase function&nbsp; $\phi (t)$&nbsp; is unchanged compared to &nbsp; $f_{\rm T} = f_{50}$&nbsp;.
  
 
</quiz>
 
</quiz>
  
===Musterlösung===
+
===Solution===
 
{{ML-Kopf}}
 
{{ML-Kopf}}
  
 
[[File:P_ID766__Sig_A_4_6_a.png|250px|right|frame|Ortskurve für OSB]]
 
[[File:P_ID766__Sig_A_4_6_a.png|250px|right|frame|Ortskurve für OSB]]
'''(1)'''&nbsp; Richtig ist der <u>Lösungsvorschlag 2</u>:
+
'''(1)'''&nbsp; <u>Proposed solution 2</u> is correct:
*Das Spektrum des äquivalenten TP–Signals lautet mit der Trägerfrequenz&nbsp; $f_{\rm T} = f_{50} = 50 \ \text{kHz}$:
+
*The spectrum of the equivalent LP signal signal with carrier frequency&nbsp; $f_{\rm T} = f_{50} = 50 \ \text{kHz}$:
 
:$$S_{\rm TP}(f ) = S_{\rm +}(f+ f_{\rm 50}) = 1 \cdot \delta (f)-
 
:$$S_{\rm TP}(f ) = S_{\rm +}(f+ f_{\rm 50}) = 1 \cdot \delta (f)-
 
{\rm j} \cdot \delta (f - f_{\rm 10}) .$$
 
{\rm j} \cdot \delta (f - f_{\rm 10}) .$$
*Damit ergibt sich für das dazugehörige Zeitsignal:
+
*This gives for the associated time signal:
 
:$$s_{\rm TP}(t) = {\rm 1 } - {\rm j} \cdot {\rm e}^{{\rm
 
:$$s_{\rm TP}(t) = {\rm 1 } - {\rm j} \cdot {\rm e}^{{\rm
 
j}\hspace{0.05cm} \omega_{\rm 10} \hspace{0.05cm} t }.$$
 
j}\hspace{0.05cm} \omega_{\rm 10} \hspace{0.05cm} t }.$$
*Ausgehend vom Punkt&nbsp; $(1, –{\rm j})$&nbsp; verläuft&nbsp; $s_{\rm TP}(t)$&nbsp; auf einem Kreis mit  Mittelpunkt&nbsp; $(1, 0)$&nbsp; und Radius&nbsp; $1$.  
+
*Starting from the point&nbsp; $(1, –{\rm j})$&nbsp; &nbsp; $s_{\rm TP}(t)$&nbsp; runs on a circle with centre&nbsp; $(1, 0)$&nbsp; and radius&nbsp; $1$.  
*Die Periodendauer ist gleich dem Kehrwert der Frequenz: &nbsp; $T_0 = 1/f_{10} = 100 \ &micro; \text{s}$ &nbsp;&nbsp; ⇒ &nbsp;&nbsp; <u>Antwort 2</u>.
+
*The period is equal to the reciprocal of the frequency: &nbsp; $T_0 = 1/f_{10} = 100 \ &micro; \text{s}$ &nbsp;&nbsp; ⇒ &nbsp;&nbsp; <u>Answer 2</u>.
  
  
  
'''(2)'''&nbsp; Spaltet man obige Gleichung nach Real- und Imaginäranteil auf, so erhält man:
+
'''(2)'''&nbsp; Splitting the above equation into real and imaginary parts, we get:
 
   
 
   
 
:$$s_{\rm TP}(t) = {\rm 1 } + \sin({ \omega_{\rm 10} \hspace{0.05cm} t })
 
:$$s_{\rm TP}(t) = {\rm 1 } + \sin({ \omega_{\rm 10} \hspace{0.05cm} t })
 
-{\rm j}\cdot \cos({ \omega_{\rm 10} \hspace{0.05cm} t }).$$
 
-{\rm j}\cdot \cos({ \omega_{\rm 10} \hspace{0.05cm} t }).$$
  
*Dies führt zur Betragsfunktion
+
*This leads to the magnitude function
 
   
 
   
 
:$$a(t)=  |s_{\rm TP}(t)|=\sqrt{{\rm Re}\left[s_{\rm
 
:$$a(t)=  |s_{\rm TP}(t)|=\sqrt{{\rm Re}\left[s_{\rm
Line 90: Line 90:
 
  = \sqrt{2 \cdot ( 1 +  \sin(\omega_{\rm 10}\hspace{0.05cm} t))}.$$
 
  = \sqrt{2 \cdot ( 1 +  \sin(\omega_{\rm 10}\hspace{0.05cm} t))}.$$
  
*Für den Minimalwert erhält man unter Berücksichtigung von&nbsp; $\sin(\omega_{10} \cdot t) \geq -1$&nbsp;  &nbsp;&nbsp; ⇒ &nbsp;&nbsp; $a_{\text{min}} \; \underline{= 0}$.  
+
*For the minimum value, considering&nbsp; $\sin(\omega_{10} \cdot t) \geq -1$&nbsp;  &nbsp;&nbsp; ⇒ &nbsp;&nbsp; $a_{\text{min}} \; \underline{= 0}$ is obtained..  
*Der Maximalwert ergibt sich aus&nbsp; $\sin(\omega_{10} \cdot t \leq 1$ ) &nbsp;&nbsp; ⇒ &nbsp;&nbsp; $a_{\text{max}} \; \underline{= 2}$.  
+
*The maximum value is obtained from&nbsp; $\sin(\omega_{10} \cdot t \leq 1$ ) &nbsp;&nbsp; ⇒ &nbsp;&nbsp; $a_{\text{max}} \; \underline{= 2}$.  
*Bei&nbsp; $t = 0$&nbsp; ist der Betrag gleich&nbsp; $a_0 = \sqrt{2 }\; \underline{\approx  1.414}$.
+
*At&nbsp; $t = 0$&nbsp;, the magnitude is equal to&nbsp; $a_0 = \sqrt{2 }\; \underline{\approx  1.414}$.
  
  
  
'''(3)'''&nbsp; Entsprechend der allgemeinen Definition gilt:
+
'''(3)'''&nbsp; According to the general definition:
 
   
 
   
 
:$$\phi(t)= {\rm arctan} \hspace{0.1cm}\frac{{\rm Im}\left[s_{\rm
 
:$$\phi(t)= {\rm arctan} \hspace{0.1cm}\frac{{\rm Im}\left[s_{\rm
Line 103: Line 103:
 
\sin(\omega_{\rm 10}\hspace{0.05cm} t)}.$$
 
\sin(\omega_{\rm 10}\hspace{0.05cm} t)}.$$
  
*Für&nbsp; $t = 0$&nbsp; ist&nbsp; $\cos( \omega_{10} \cdot t ) = 1$&nbsp; und&nbsp; $\sin( \omega_{10} \cdot t ) = 0$. Daraus folgt:
+
*For&nbsp; $t = 0$&nbsp; &nbsp; $\cos( \omega_{10} \cdot t ) = 1$&nbsp; and&nbsp; $\sin( \omega_{10} \cdot t ) = 0$. It follows:
 
   
 
   
 
:$$\phi(t = 0)= {\rm arctan} (-1) \hspace{0.15 cm}\underline{= -45^\circ}.$$
 
:$$\phi(t = 0)= {\rm arctan} (-1) \hspace{0.15 cm}\underline{= -45^\circ}.$$
  
*Dagegen gilt für&nbsp; $t = T_0/4 =25 \ &micro; \text{s}$ :
+
*On the other hand, for&nbsp; $t = T_0/4 =25 \ &micro; \text{s}$ :
 
   
 
   
 
:$$\cos(\omega_{\rm 10}\hspace{0.05cm} t) = 0;
 
:$$\cos(\omega_{\rm 10}\hspace{0.05cm} t) = 0;
Line 114: Line 114:
 
\hspace{0.05cm} &micro; s}) \hspace{0.15 cm}\underline{= 0}.$$
 
\hspace{0.05cm} &micro; s}) \hspace{0.15 cm}\underline{= 0}.$$
  
*Die beiden bisher berechneten Winkel kann man auch aus obiger Grafik ablesen.  
+
*The two angles calculated so far can also be read from the graph above.
  
  
Der Phasenwert bei&nbsp; $t =75 \ &micro; \text{s}$&nbsp; muss dagegen durch Grenzübergang bestimmt werden, da hier sowohl der Real- als auch der Imaginärteil Null werden und somit das Argument der arctan–Funktion unbestimmt ist. Man erhält&nbsp; $\phi(t=75 \ &micro; \text{s}) \; \underline{= 0}.$ Dieses Ergebnis soll hier numerisch nachgewiesen werden:  
+
The phase value at&nbsp; $t =75 \ &micro; \text{s}$&nbsp;, on the other hand, must be determined by boundary crossing, since here both the real and imaginary parts become zero and thus the argument of the arctan function is indeterminate. One obtains&nbsp; $\phi(t=75 \ &micro; \text{s}) \; \underline{= 0}.$ This result is to be verified numerically here:
*Berechnet man die Phasenfunktion für&nbsp; $t =74 \ {\rm &micro;} \text{s}$, so erhält man mit&nbsp; $\omega_{10} \cdot t = 1.48 \cdot \pi \; \Rightarrow \; 266.4^\circ$:
+
*If one calculates the phase function for&nbsp; $t =74 \ {\rm &micro;} \text{s}$, so erhält man mit&nbsp; $\omega_{10} \cdot t = 1.48 \cdot \pi \; \Rightarrow \; 266.4^\circ$:
 
   
 
   
 
:$$\phi(t = {\rm 74 \hspace{0.05cm} {\rm &micro;} s})= {\rm arctan}
 
:$$\phi(t = {\rm 74 \hspace{0.05cm} {\rm &micro;} s})= {\rm arctan}
Line 125: Line 125:
 
arctan}(31)\approx 88^\circ.$$
 
arctan}(31)\approx 88^\circ.$$
  
*Entsprechend gilt für&nbsp; $t =76 \ {\rm &micro;} \text{s}$&nbsp; mit&nbsp; $\omega_{10} \cdot t = 1.52 \cdot \pi \; \Rightarrow \; 273.6^\circ$ :
+
*Accordingly, for&nbsp; $t =76 \ {\rm &micro;} \text{s}$&nbsp; with&nbsp; $\omega_{10} \cdot t = 1.52 \cdot \pi \; \Rightarrow \; 273.6^\circ$ :
 
   
 
   
 
:$$\phi(t = {\rm 76 \hspace{0.05cm} {\rm &micro;} s})= {\rm arctan}
 
:$$\phi(t = {\rm 76 \hspace{0.05cm} {\rm &micro;} s})= {\rm arctan}
Line 131: Line 131:
 
\approx {\rm arctan}(-31)\approx -88^\circ.$$
 
\approx {\rm arctan}(-31)\approx -88^\circ.$$
  
*Die Zahlenwerte lassen vermuten, dass die Grenzwerte für&nbsp; $t \; \rightarrow \; 75 \ {\rm &micro;} \text{s}$&nbsp; sich zu&nbsp; $\pm 90^\circ$&nbsp; ergeben, je nachdem, ob man sich diesem Wert von oben oder unten nähert.  
+
*The numerical values suggest that the limit values for&nbsp; $t \; \rightarrow \; 75 \ {\rm &micro;} \text{s}$&nbsp; result in&nbsp; $\pm 90^\circ$&nbsp; depending on whether this value is approached from above or below.  
*Der Phasenwert bei exakt&nbsp; $t =75 \ {\rm &micro;} \text{s}$&nbsp; ist gleich dem Mittelwert zwischen rechts- und linksseitigem Grenzwert, also tatsächlich Null.
+
*The phase value at exactly&nbsp; $t =75 \ {\rm &micro;} \text{s}$&nbsp; is equal to the mean value between the right-hand and left-hand limit values, i.e. actually zero.
  
  
[[File:P_ID767__Sig_A_4_6_d.png|250px|right|frame|Ortskurve für USB]]
+
[[File:P_ID767__Sig_A_4_6_d.png|250px|right|frame|Locus curve for LSB]]
'''(4)'''&nbsp; Mit der Trägerfrequenz $f_{\rm T} = f_{60} = 60 \ \text{ kHz}$&nbsp; lauten die Gleichungen für Zeit– und Frequenzbereich:
+
'''(4)'''&nbsp; With the carrier frequency $f_{\rm T} = f_{60} = 60 \ \text{ kHz}$&nbsp; the equations for time and frequency domain are:
 
   
 
   
 
:$$S_{\rm TP}(f ) = S_{\rm +}(f+ f_{\rm 60}) = -{\rm j} \cdot \delta
 
:$$S_{\rm TP}(f ) = S_{\rm +}(f+ f_{\rm 60}) = -{\rm j} \cdot \delta
Line 144: Line 144:
 
j}\hspace{0.05cm} \omega_{\rm 10} \hspace{0.05cm} t }.$$
 
j}\hspace{0.05cm} \omega_{\rm 10} \hspace{0.05cm} t }.$$
 
   
 
   
In der Grafik ist&nbsp; $s_{\rm TP}(t)$&nbsp; dargestellt. Man erkennt:
+
In the graph,&nbsp; $s_{\rm TP}(t)$&nbsp; is shown. It can be seen:
*Die Ortskurve ist wiederum ein Kreis mit Radius&nbsp; $1$, aber nun mit Mittelpunkt&nbsp; $(0, –{\rm j})$.
+
*The locus curve is again a circle with radius&nbsp; $1$, but now with centre&nbsp; $(0, –{\rm j})$.
*Es gilt auch hier&nbsp; $s_{\rm TP}(t = 0) = 1 - {\rm j}$.
+
*Here, too&nbsp; $s_{\rm TP}(t = 0) = 1 - {\rm j}$ applies.
*Man bewegt sich nun auf der Ortskurve im Uhrzeigersinn.
+
*You now move clockwise on the locus curve..
*Die Periodendauer beträgt weiterhin&nbsp; $T_0 = 1/f_{10} = 100 \ &micro; \text{s}$.
+
*The period continues to be&nbsp; $T_0 = 1/f_{10} = 100 \ &micro; \text{s}$.
*Die Ortskurve ist gegenüber der Teilaufgabe&nbsp; '''(1)'''&nbsp; nun&nbsp; um $90^\circ$&nbsp; in der komplexen Ebene gedreht.  
+
*The locus curve is now rotated by $90^\circ$&nbsp; in the complex plane compared to sub-task&nbsp; '''(1)'''&nbsp; nun&nbsp;.
*Für alle Zeiten ergeben sich die gleichen Zeigerlängen wie für&nbsp; $f_{\rm T} = f_{50}$. Der Betrag bleibt gleich.
+
*For all times, the same pointer lengths result as for&nbsp; $f_{\rm T} = f_{50}$. The magnitude remains the same.
*Die Phasenfunktion&nbsp; $\phi(t)$&nbsp; liefert nun Werte zwischen&nbsp; $-\pi$&nbsp; und Null, während die in der Teilaufgabe&nbsp; '''(3)'''&nbsp; berechnete Phasenfunktion Werte zwischen&nbsp; $-\pi/2$&nbsp; und&nbsp; $+\pi /2$&nbsp; angenommen hat. Es gilt für alle Zeiten&nbsp; $t$:
+
*The phase function&nbsp; $\phi(t)$&nbsp; now yields values between&nbsp; $-\pi$&nbsp; and zero, while the phase function calculated in subtask&nbsp; '''(3)'''&nbsp; has assumed values between&nbsp; $-\pi/2$&nbsp; and&nbsp; $+\pi /2$&nbsp;. It is valid for all times&nbsp; $t$:
 
   
 
   
:$$\phi_{\rm Teilaufgabe \ (4)}= -(\phi_{\rm Teilaufgabe \ (3)} + 90^\circ).$$
+
:$$\phi_{\rm subtask \ (4)}= -(\phi_{\rm subtask \ (3)} + 90^\circ).$$
  
Richtig sind somit der <u>erste und der dritte Lösungsvorschlag</u>.
+
<u>The first and third suggested solutions</u> are therefore correct.
 
{{ML-Fuß}}
 
{{ML-Fuß}}
  
 
__NOEDITSECTION__
 
__NOEDITSECTION__
 
[[Category:Exercises for Signal Representation|^4.3 Equivalent Low Pass Signal and Its Spectral Function^]]
 
[[Category:Exercises for Signal Representation|^4.3 Equivalent Low Pass Signal and Its Spectral Function^]]

Revision as of 23:40, 15 February 2021

spectrum of the analytical signal

We consider the analytical signal  $s_+(t)$  with the spectral function

$$S_{\rm +}(f) = 1 \cdot \delta (f - f_{\rm 50})- {\rm j} \cdot \delta (f - f_{\rm 60}) .$$

Here  $f_{50}$  and  $f_{60}$  are abbreviations for the frequencies  $50 \ \rm kHz$  and  $60 \ \rm kHz$ respectively.

In this task, the course of the equivalent low-pass signal  $s_{\rm TP}(t)$  , which is also referred to as the „locus curve” in this tutorial.

  • In subtasks  (1)  to  (3)  , we assume that the signal  $s(t)$  is produced by a single sideband amplitude modulation of the sinusoidal message signal of frequency  $f_{\rm N} = 10 \ \text{ kHz}$  with a cosinusoidal carrier at  $f_{\rm T} = f_{50}$  , whereby only the upper sideband is transmitted („USB modulation”).
  • In contrast, subtask  (4)  assumes the carrier frequency  $f_{\rm T} = f_{60}$ . This assumption presupposes that LSB modulation has taken place.





Hints:


Questions

1

Give the equivalent low-pass signal  $s_{\rm TP}(t)$  for the carrier frequency  $f_{\rm N} = 10 \ \text{ kHz}$ . Which of the following statements are true?

The locus curve describes an ellipse.
The locus curve describes a circle.
The locus curve describes an arc.

2

Calculate the magnitude function  $a(t) = |s_{\rm TP}(t)|$. What is the value of  $a_0$  at  $t = 0$  and the minimum and maximum values of the magnitude?

$a_{\text{min}}\ = \ $

$a_{\text{max}}\ = \ $

$a_0\ = \ $

3

Calculate the phase function  $\phi(t)$. What are the phase values at  $t = 0$  and  $t=25 \ {\rm µ} \text{s}$?
Interpret  $\phi (t)$ in the range around  $t=75 \ {\rm µ} \text{s}$.

$\phi(t=0 \ {\rm µ} \text{s})\ = \ $

 $\text{deg}$
$\phi(t=25 \ {\rm µ} \text{s})\ = \ $

 $\text{deg}$
$\phi(t=75 \ {\rm µ} \text{s})\ = \ $

 $\text{deg}$

4

Give the equivalent low-pass signal  $s_{\rm TP}(t)$  für  $f_{\rm T} = 60 \ \text{kHz} = f_{60}$  an. Which of the following statements are true?

The locus curve is a circle with radius  $1$  around the centre  $(0, –{\rm j})$ .
Now  $s_{\rm TP}(t = 0) = 1 + {\rm j}$ applies.
The magnitude function  $a(t)$  is unchanged compared to   $f_{\rm T} = f_{50}$ .
The phase function  $\phi (t)$  is unchanged compared to   $f_{\rm T} = f_{50}$ .


Solution

Ortskurve für OSB

(1)  Proposed solution 2 is correct:

  • The spectrum of the equivalent LP signal signal with carrier frequency  $f_{\rm T} = f_{50} = 50 \ \text{kHz}$:
$$S_{\rm TP}(f ) = S_{\rm +}(f+ f_{\rm 50}) = 1 \cdot \delta (f)- {\rm j} \cdot \delta (f - f_{\rm 10}) .$$
  • This gives for the associated time signal:
$$s_{\rm TP}(t) = {\rm 1 } - {\rm j} \cdot {\rm e}^{{\rm j}\hspace{0.05cm} \omega_{\rm 10} \hspace{0.05cm} t }.$$
  • Starting from the point  $(1, –{\rm j})$    $s_{\rm TP}(t)$  runs on a circle with centre  $(1, 0)$  and radius  $1$.
  • The period is equal to the reciprocal of the frequency:   $T_0 = 1/f_{10} = 100 \ µ \text{s}$    ⇒    Answer 2.


(2)  Splitting the above equation into real and imaginary parts, we get:

$$s_{\rm TP}(t) = {\rm 1 } + \sin({ \omega_{\rm 10} \hspace{0.05cm} t }) -{\rm j}\cdot \cos({ \omega_{\rm 10} \hspace{0.05cm} t }).$$
  • This leads to the magnitude function
$$a(t)= |s_{\rm TP}(t)|=\sqrt{{\rm Re}\left[s_{\rm TP}(t)\right]^2 + {\rm Im}\left[s_{\rm TP}(t)\right]^2 }= \sqrt{1 + 2 \sin(\omega_{\rm 10}\hspace{0.05cm} t)+ \sin^2(\omega_{\rm 10}\hspace{0.05cm} t)+ \cos^2(\omega_{\rm 10}\hspace{0.05cm} t)} = \sqrt{2 \cdot ( 1 + \sin(\omega_{\rm 10}\hspace{0.05cm} t))}.$$
  • For the minimum value, considering  $\sin(\omega_{10} \cdot t) \geq -1$     ⇒    $a_{\text{min}} \; \underline{= 0}$ is obtained..
  • The maximum value is obtained from  $\sin(\omega_{10} \cdot t \leq 1$ )    ⇒    $a_{\text{max}} \; \underline{= 2}$.
  • At  $t = 0$ , the magnitude is equal to  $a_0 = \sqrt{2 }\; \underline{\approx 1.414}$.


(3)  According to the general definition:

$$\phi(t)= {\rm arctan} \hspace{0.1cm}\frac{{\rm Im}\left[s_{\rm TP}(t)\right]}{{\rm Re}\left[s_{\rm TP}(t)\right]}= {\rm arctan} \hspace{0.1cm}\frac{-\cos(\omega_{\rm 10}\hspace{0.05cm} t)}{1 + \sin(\omega_{\rm 10}\hspace{0.05cm} t)}.$$
  • For  $t = 0$    $\cos( \omega_{10} \cdot t ) = 1$  and  $\sin( \omega_{10} \cdot t ) = 0$. It follows:
$$\phi(t = 0)= {\rm arctan} (-1) \hspace{0.15 cm}\underline{= -45^\circ}.$$
  • On the other hand, for  $t = T_0/4 =25 \ µ \text{s}$ :
$$\cos(\omega_{\rm 10}\hspace{0.05cm} t) = 0; \hspace{0.2cm}\sin(\omega_{\rm 10}\hspace{0.05cm} t) = 1 \hspace{0.3cm} \Rightarrow \hspace{0.3cm}\phi(t = {\rm 25 \hspace{0.05cm} µ s}) \hspace{0.15 cm}\underline{= 0}.$$
  • The two angles calculated so far can also be read from the graph above.


The phase value at  $t =75 \ µ \text{s}$ , on the other hand, must be determined by boundary crossing, since here both the real and imaginary parts become zero and thus the argument of the arctan function is indeterminate. One obtains  $\phi(t=75 \ µ \text{s}) \; \underline{= 0}.$ This result is to be verified numerically here:

  • If one calculates the phase function for  $t =74 \ {\rm µ} \text{s}$, so erhält man mit  $\omega_{10} \cdot t = 1.48 \cdot \pi \; \Rightarrow \; 266.4^\circ$:
$$\phi(t = {\rm 74 \hspace{0.05cm} {\rm µ} s})= {\rm arctan} \hspace{0.1cm}\frac{\cos(86.4^\circ)}{1 - \sin(86.4^\circ)} = {\rm arctan} \hspace{0.1cm}\frac{0.062}{1 - 0.998} \approx {\rm arctan}(31)\approx 88^\circ.$$
  • Accordingly, for  $t =76 \ {\rm µ} \text{s}$  with  $\omega_{10} \cdot t = 1.52 \cdot \pi \; \Rightarrow \; 273.6^\circ$ :
$$\phi(t = {\rm 76 \hspace{0.05cm} {\rm µ} s})= {\rm arctan} \hspace{0.1cm}\frac{-\cos(86.4^\circ)}{1 - \sin(86.4^\circ)} \approx {\rm arctan}(-31)\approx -88^\circ.$$
  • The numerical values suggest that the limit values for  $t \; \rightarrow \; 75 \ {\rm µ} \text{s}$  result in  $\pm 90^\circ$  depending on whether this value is approached from above or below.
  • The phase value at exactly  $t =75 \ {\rm µ} \text{s}$  is equal to the mean value between the right-hand and left-hand limit values, i.e. actually zero.


Locus curve for LSB

(4)  With the carrier frequency $f_{\rm T} = f_{60} = 60 \ \text{ kHz}$  the equations for time and frequency domain are:

$$S_{\rm TP}(f ) = S_{\rm +}(f+ f_{\rm 60}) = -{\rm j} \cdot \delta (f) + \delta (f + f_{\rm 10}) ;$$
$$s_{\rm TP}(t) = - {\rm j} + 1 \cdot {\rm e}^{-{\rm j}\hspace{0.05cm} \omega_{\rm 10} \hspace{0.05cm} t }.$$

In the graph,  $s_{\rm TP}(t)$  is shown. It can be seen:

  • The locus curve is again a circle with radius  $1$, but now with centre  $(0, –{\rm j})$.
  • Here, too  $s_{\rm TP}(t = 0) = 1 - {\rm j}$ applies.
  • You now move clockwise on the locus curve..
  • The period continues to be  $T_0 = 1/f_{10} = 100 \ µ \text{s}$.
  • The locus curve is now rotated by $90^\circ$  in the complex plane compared to sub-task  (1)  nun .
  • For all times, the same pointer lengths result as for  $f_{\rm T} = f_{50}$. The magnitude remains the same.
  • The phase function  $\phi(t)$  now yields values between  $-\pi$  and zero, while the phase function calculated in subtask  (3)  has assumed values between  $-\pi/2$  and  $+\pi /2$ . It is valid for all times  $t$:
$$\phi_{\rm subtask \ (4)}= -(\phi_{\rm subtask \ (3)} + 90^\circ).$$

The first and third suggested solutions are therefore correct.