Difference between revisions of "Aufgaben:Exercise 5.6Z: Single-Carrier and Multi-Carrier System"

From LNTwww
 
(One intermediate revision by the same user not shown)
Line 56: Line 56:
 
===Solution===
 
===Solution===
 
{{ML-Kopf}}
 
{{ML-Kopf}}
'''(1)'''&nbsp;  From the diagram on the information page, it is immediately apparent that the single-carrier system is based on binary phase modulation&nbsp; $\rm (BPSK)$&nbsp; &nbsp; ⇒  &nbsp; <u>solution 2</u>.
+
'''(1)'''&nbsp;  From the diagram on the front page,&nbsp; it is immediately apparent that the single-carrier system is based on&nbsp; "binary phase modulation"&nbsp; $\rm (BPSK)$&nbsp; ⇒  &nbsp;<u>solution 2</u>.
  
  
'''(2)'''&nbsp;  In contrast, the multi-carrier system is based on &nbsp; $\rm (16–QAM)$  &nbsp; ⇒  &nbsp; <u>solution 3</u>.
+
'''(2)'''&nbsp;  In contrast,&nbsp; the multi-carrier system is based on&nbsp; $\rm 16–QAM$  &nbsp; ⇒  &nbsp; <u>solution 4</u>.
  
  
'''(3)'''&nbsp;  In general, for an OFDM system with&nbsp; $N$ carriers&nbsp; and&nbsp; $M$&nbsp; signal space points, the symbol duration is:
+
'''(3)'''&nbsp;  In general,&nbsp; for an OFDM system with&nbsp; $N$&nbsp; carriers&nbsp; and&nbsp; $M$&nbsp; signal space points,&nbsp; the symbol duration is:
 
:$$T = N \cdot {\rm{log}_2}\hspace{0.04cm}(M) \cdot T_{\rm{B}}.$$
 
:$$T = N \cdot {\rm{log}_2}\hspace{0.04cm}(M) \cdot T_{\rm{B}}.$$
 
*Because of &nbsp;$R_{\rm{B}} = 1 \ \rm Mbit/s$,&nbsp; the bit duration for BPSK is equal to&nbsp; $T_{\rm{B}} = 1 \ \rm &micro; s$.  
 
*Because of &nbsp;$R_{\rm{B}} = 1 \ \rm Mbit/s$,&nbsp; the bit duration for BPSK is equal to&nbsp; $T_{\rm{B}} = 1 \ \rm &micro; s$.  
*From this, the symbol duration of the single-carrier system with&nbsp; $N = 1$&nbsp; and&nbsp; $M = 2$ is:
+
*From this,&nbsp; the symbol duration of the single-carrier system with&nbsp; $N = 1$&nbsp; and&nbsp; $M = 2$&nbsp; is:
 
:$$ T_{\rm{SC}} = 1 \cdot {\rm{log}_2}\hspace{0.04cm}(2) \cdot T_{\rm{B}}\hspace{0.15cm}\underline {= 1\,\,{\rm &micro; s}}.$$
 
:$$ T_{\rm{SC}} = 1 \cdot {\rm{log}_2}\hspace{0.04cm}(2) \cdot T_{\rm{B}}\hspace{0.15cm}\underline {= 1\,\,{\rm &micro; s}}.$$
  
  
 
+
'''(4)'''&nbsp;  Similarly,&nbsp; for the multi-carrier system with&nbsp; $N = 32$&nbsp; and&nbsp; $M = 16$,&nbsp; we obtain:
'''(4)'''&nbsp;  Similarly, for the multi-carrier system with&nbsp; $N = 32$&nbsp; and&nbsp; $M = 16$, we obtain:
 
 
:$$T_{\rm{MC}} = 32 \cdot {\rm{log}_2}\hspace{0.04cm}(16) \cdot T_{\rm{B}}\hspace{0.15cm}\underline {= 128\,\,{\rm &micro; s}}.$$
 
:$$T_{\rm{MC}} = 32 \cdot {\rm{log}_2}\hspace{0.04cm}(16) \cdot T_{\rm{B}}\hspace{0.15cm}\underline {= 128\,\,{\rm &micro; s}}.$$
  
  
'''(5)'''&nbsp;  <u>Solution 2</u> is correct because:  
+
'''(5)'''&nbsp;  <u>Solution 2</u>&nbsp; is correct because:  
::At large symbol duration, the relative fraction extending from the predecessor symbol into the symbol under consideration and thus causing impulse interference (ISI) is smaller than at small symbol duration.
+
*At large symbol duration,&nbsp; the relative fraction extending from the predecessor symbol into the symbol under consideration and thus causing intersymbol interference&nbsp; $\rm (ISI)$&nbsp; is smaller than at small symbol duration.
  
 
{{ML-Fuß}}
 
{{ML-Fuß}}

Latest revision as of 13:00, 10 January 2022

Signal space assignments for  $\rm SC$  (above),  $\rm MC$  (bottom)

In this exercise, a comparison is to be made between

  • a single-carrier  $\rm (SC)$  system  $(N = 1)$,  and
  • a multi-carrier  $\rm (MC)$  system with  $N = 32$  carriers.


For both transmission systems  (see diagram),  a data bit rate of  $R_{\rm B} = 1 \ \rm Mbit/s$  is required in each case.



Notes:


Questions

1

Which mapping does the single-carrier system use?

ASK,
BPSK,
4-QAM
16-QAM

2

Which mapping does the multi-carrier system use?

ASK,
BPSK,
4-QAM,
16-QAM

3

Calculate the symbol duration  $T_{\rm SC}$  of the single-carrier system.

$T_{\rm SC} \ = \ $

$\ \rm µ s$

4

Calculate the symbol duration  $T_{\rm MC}$  of the multi-carrier system.

$T_{\rm MC} \ = \ $

$\ \rm µ s$

5

Which of the following statements is true?

The intersymbol interferences are independent of the symbol duration  $T$.
The intersymbol interferences decrease with increasing symbol duration  $T$. 
The intersymbol interferences increase with increasing symbol duration  $T$. 


Solution

(1)  From the diagram on the front page,  it is immediately apparent that the single-carrier system is based on  "binary phase modulation"  $\rm (BPSK)$  ⇒  solution 2.


(2)  In contrast,  the multi-carrier system is based on  $\rm 16–QAM$   ⇒   solution 4.


(3)  In general,  for an OFDM system with  $N$  carriers  and  $M$  signal space points,  the symbol duration is:

$$T = N \cdot {\rm{log}_2}\hspace{0.04cm}(M) \cdot T_{\rm{B}}.$$
  • Because of  $R_{\rm{B}} = 1 \ \rm Mbit/s$,  the bit duration for BPSK is equal to  $T_{\rm{B}} = 1 \ \rm µ s$.
  • From this,  the symbol duration of the single-carrier system with  $N = 1$  and  $M = 2$  is:
$$ T_{\rm{SC}} = 1 \cdot {\rm{log}_2}\hspace{0.04cm}(2) \cdot T_{\rm{B}}\hspace{0.15cm}\underline {= 1\,\,{\rm µ s}}.$$


(4)  Similarly,  for the multi-carrier system with  $N = 32$  and  $M = 16$,  we obtain:

$$T_{\rm{MC}} = 32 \cdot {\rm{log}_2}\hspace{0.04cm}(16) \cdot T_{\rm{B}}\hspace{0.15cm}\underline {= 128\,\,{\rm µ s}}.$$


(5)  Solution 2  is correct because:

  • At large symbol duration,  the relative fraction extending from the predecessor symbol into the symbol under consideration and thus causing intersymbol interference  $\rm (ISI)$  is smaller than at small symbol duration.