Difference between revisions of "Aufgaben:Exercise 4.4: Pointer Diagram for DSB-AM"

From LNTwww
m (Text replacement - "Signal_Representation/Gesetzmäßigkeiten_der_Fouriertransformation" to "Signal_Representation/Fourier_Transform_Laws")
 
(18 intermediate revisions by 4 users not shown)
Line 1: Line 1:
  
{{quiz-Header|Buchseite=Signaldarstellung/Analytisches Signal und zugehörige Spektralfunktion
+
{{quiz-Header|Buchseite=Signal_Representation/Analytical_Signal_and_Its_Spectral_Function
 
}}
 
}}
  
[[File:P_ID718__Sig_A_4_4.png|250px|right|frame|Spektrum des analytischen Signals]]
+
[[File:P_ID718__Sig_A_4_4.png|250px|right|frame|Spectrum of the analytical signal]]
  
Wir gehen aus von einem cosinusförmigen Quellensignal  $q(t)$  mit
+
We assume a cosine-shaped source signal  $q(t)$  with
*der Amplitude  $A_{\rm N} = 0.8 \ \text{V}$   und
+
*amplitude  $A_{\rm N} = 0.8 \ \text{V}$   and
*der Frequenz  $f_{\rm N}= 10 \ \text{kHz}$.  
+
*frequency  $f_{\rm N}= 10 \ \text{kHz}$.  
  
  
Die Frequenzumsetzung erfolgt mittels  [[Modulation_Methods/Zweiseitenband-Amplitudenmodulation#ZSB-Amplitudenmodulation_mit_Tr.C3.A4ger|Zweiseitenband–Amplitudenmodulation mit Träger]], abgekürzt ZSB–AM.
+
The frequency conversion is done by means of  [[Modulation_Methods/Zweiseitenband-Amplitudenmodulation#ZSB-Amplitudenmodulation_mit_Tr.C3.A4ger|"Double-Sideband Amplitude Modulation with Carrier"]].
  
Das modulierte Signal  $s(t)$  lautet mit dem (normierten) Träger  $z(t) = \text{cos}(\omega_{\rm T} \cdot t)$  und dem Gleichanteil  $q_0 = 1 \ \text{V}$:
+
The modulated signal  $s(t)$  is with the (normalised) carrier  $z(t) = \text{cos}(\omega_{\rm T} \cdot t)$  and the DC component  $q_0 = 1 \ \text{V}$:
 
   
 
   
 
:$$\begin{align*} s(t) & =  \left(q_0 + q(t)\right) \cdot z(t)= \left({\rm 1 \hspace{0.05cm}
 
:$$\begin{align*} s(t) & =  \left(q_0 + q(t)\right) \cdot z(t)= \left({\rm 1 \hspace{0.05cm}
Line 20: Line 20:
 
  +  {A_{\rm N}}/{2} \cdot {\cos} ( (\omega_{\rm T}- \omega_{\rm N}) \cdot t).\end{align*}$$
 
  +  {A_{\rm N}}/{2} \cdot {\cos} ( (\omega_{\rm T}- \omega_{\rm N}) \cdot t).\end{align*}$$
  
Der erste Term beschreibt den Träger, der zweite Term das sogenannte obere Seitenband (OSB) und der letzte Term das untere Seitenband (USB).
+
The first term describes the carrier, the second term the so-called upper sideband  $\rm (OSB)$   and the last term the lower sideband  $\rm (USB)$.
  
Die Skizze zeigt das Spektrum  $S_+(f)$  des dazugehörigen analytischen Signals für  $f_{\rm T} = 50 \ \text{kHz}$. Man erkennt
+
The sketch shows the spectrum  $S_+(f)$  of the corresponding analytical signal for  $f_{\rm T} = 50 \ \text{kHz}$. You can see
*den Träger (rot),  
+
*the carrier (red),  
*das obere Seitenband (blau) und
+
*the upper sideband (blue),  and
*das untere Seitenband (grün).
+
*the lower sideband (grün).
  
  
In der Teilaufgabe  '''(5)'''  ist nach dem Betrag von  $s_+(t)$  gefragt. Hierunter versteht man die Länge des resultierenden Zeigers.
+
In subtask  '''(5)'''  the magnitude of  $s_+(t)$  is asked for.  This is the length of the resulting pointer.
  
  
Line 34: Line 34:
  
  
 +
''Hints:''
 +
*This exercise belongs to the chapter  [[Signal_Representation/Analytical_Signal_and_Its_Spectral_Function|Analytical Signal and its Spectral Function]].
 +
*The interactive applet  [[Applets:Physical_Signal_%26_Analytic_Signal|Physical and Analytical Signal]]  illustrates the topic covered here.
 +
*In this task we use the following nomenclature because of the German original:
 +
#The index  $\rm N$  stands for "source signal"   ⇒   (German:  "Nachrichtenignal").
 +
#The index  $\rm T$  stands for  "carrier"   ⇒   (German:  "Trägersignal").
 +
#$\rm OSB$  denotes the  "upper sideband"   ⇒   (German:  "oberes Seitenband").
 +
#$\rm USB$  denotes the  "lower sideband"   ⇒   (German:  "unteres Seitenband").
  
 
+
===Questions===
''Hinweise:''
 
*Die Aufgabe gehört zum  Kapitel  [[Signal_Representation/Analytisches_Signal_und_zugehörige_Spektralfunktion|Analytisches Signal und zugehörige Spektralfunktion]].
 
 
*Sie können Ihre Lösung mit dem Interaktionsmodul  [[Applets:Physikalisches_Signal_%26_Analytisches_Signal|Physikalisches Signal & Analytisches Signal]]   überprüfen.
 
 
 
 
 
 
 
===Fragebogen===
 
  
 
<quiz display=simple>
 
<quiz display=simple>
{Wie lautet das analytische Signal&nbsp; $s_+(t)$. Wie groß ist dieses zur Zeit&nbsp; $t  = 0$?
+
{What is the analytical signal&nbsp; $s_+(t)$.&nbsp; What is its magnitude at time&nbsp; $t  = 0$?
 
|type="{}"}
 
|type="{}"}
 
$\text{Re}[s_+(t=0)]\ = \ $  { 1.8 3% } &nbsp;$\text{V}$
 
$\text{Re}[s_+(t=0)]\ = \ $  { 1.8 3% } &nbsp;$\text{V}$
 
$\text{Im}[s_+(t=0)]\ = \ $ { 0. } &nbsp;$\text{V}$
 
$\text{Im}[s_+(t=0)]\ = \ $ { 0. } &nbsp;$\text{V}$
  
{Welche der folgenden Aussagen sind zutreffend?
+
{Which of the following statements are true?
 
|type="[]"}
 
|type="[]"}
+ $s_+(t)$&nbsp; ergibt sich aus&nbsp; $s(t)$, wenn man&nbsp; $\cos(\text{...})$&nbsp; durch&nbsp; ${\rm e}^{{\rm j}(\text{...})}$&nbsp; ersetzt.
+
+ $s_+(t)$&nbsp; results from&nbsp; $s(t)$, if&nbsp; $\cos(\text{...})$&nbsp; is replaced by&nbsp; ${\rm e}^{{\rm j}(\text{...})}$&nbsp;.
- Ist&nbsp; $s(t)$&nbsp; eine gerade Zeitfunktion, so ist&nbsp; $s_+(t)$&nbsp; rein reell.
+
- If&nbsp; $s(t)$&nbsp; is an even time function,&nbsp; $s_+(t)$&nbsp; is purely real.
- Zu keinem Zeitpunkt verschwindet der Imaginärteil von&nbsp; $s_+(t)$.
+
- At no time does the imaginary part of&nbsp; $s_+(t)$ disappear.
  
  
{Welchen Wert besitzt das analytische Signal zur Zeit&nbsp; $t = 5 \ {\rm &micro;}\text{s}$?
+
{What is the value of the analytical signal at time&nbsp; $t = 5 \ {\rm &micro;}\text{s}$?
 
|type="{}"}
 
|type="{}"}
 
$\text{Re}[s_+(t=5  \ {\rm &micro;} \text{s})]\ = \ $ { 0. } &nbsp;$\text{V}$
 
$\text{Re}[s_+(t=5  \ {\rm &micro;} \text{s})]\ = \ $ { 0. } &nbsp;$\text{V}$
 
$\text{Im}[s_+(t=5 \ {\rm &micro;} \text{s})]\ = \ $ { 1.761 3% } &nbsp;$\text{V}$
 
$\text{Im}[s_+(t=5 \ {\rm &micro;} \text{s})]\ = \ $ { 1.761 3% } &nbsp;$\text{V}$
  
{Welchen Wert besitzt&nbsp; $s_+(t)$&nbsp; zum Zeitpunkt&nbsp; $t = 20 \ {\rm &micro;}\text{s}$?
+
{What is the value of&nbsp; $s_+(t)$&nbsp; at time&nbsp; $t = 20 \ {\rm &micro;}\text{s}$?
 
|type="{}"}
 
|type="{}"}
 
$\text{Re}[s_+(t=20 \ {\rm &micro;} \text{s})]\ = \ $ { 1.236 3% } &nbsp;$\text{V}$
 
$\text{Re}[s_+(t=20 \ {\rm &micro;} \text{s})]\ = \ $ { 1.236 3% } &nbsp;$\text{V}$
 
$\text{Im}[s_+(t=20 \ {\rm &micro;} \text{s})]\ = \ $ { 0. } &nbsp;$\text{V}$
 
$\text{Im}[s_+(t=20 \ {\rm &micro;} \text{s})]\ = \ $ { 0. } &nbsp;$\text{V}$
  
{Wie groß ist die kleinstmögliche Zeigerlänge? Zu welchem Zeitpunkt&nbsp; $t_{\text{min}}$&nbsp; tritt dieser Wert zum ersten Mal auf?
+
{What is the smallest possible pointer length?&nbsp; At what time &nbsp; $t_{\text{min}}$&nbsp; does this value occur for the first time?
 
|type="{}"}
 
|type="{}"}
 
$|s_+(t)|_{\text{min}}\ = \ $ { 0.2 3% } &nbsp;$\text{V}$
 
$|s_+(t)|_{\text{min}}\ = \ $ { 0.2 3% } &nbsp;$\text{V}$
Line 77: Line 77:
  
  
===Musterlösung===
+
===Solution===
 
{{ML-Kopf}}
 
{{ML-Kopf}}
'''(1)'''&nbsp;  Durch Fourierrücktransformation von&nbsp; $S_+(f)$&nbsp; unter Berücksichtigung des&nbsp; [[Signal_Representation/Fourier_Transform_Laws#Verschiebungssatz|Verschiebungssatzes]]&nbsp; gilt:
+
'''(1)'''&nbsp;  By inverse Fourier transform of&nbsp; $S_+(f)$&nbsp; taking into account the&nbsp; "Shifting Theorem":
+
 
 
:$$s_{+}(t) = {\rm 1 \hspace{0.05cm} V} \cdot {\rm e}^{{\rm
 
:$$s_{+}(t) = {\rm 1 \hspace{0.05cm} V} \cdot {\rm e}^{{\rm
 
j}\hspace{0.05cm} \omega_{\rm 50}\hspace{0.05cm} t } + {\rm 0.4
 
j}\hspace{0.05cm} \omega_{\rm 50}\hspace{0.05cm} t } + {\rm 0.4
Line 88: Line 88:
 
40}\hspace{0.05cm} t }.$$
 
40}\hspace{0.05cm} t }.$$
  
Der Ausdruck beschreibt die Summe dreier Zeiger, die mit unterschiedlichen Winkelgeschwindigkeiten drehen.  
+
[[File:EN_Sig_A_4_4_ML.png|center|frame|Three different analytical signals]]
*In obiger Gleichung bedeutet beispielsweise&nbsp;  $\omega_{60} = 2\pi (f_{\rm T} + f_{\rm N}) = 2\pi \cdot 60 \ \text{kHz}$.  
+
 
*Zum Zeitpunkt&nbsp; $t = 0$&nbsp; zeigen alle drei Zeiger in Richtung der reellen Achse (siehe linke Grafik).
+
*The expression describes the sum of three pointers rotating at different circular velocities.
*Man erhält den <u>rein reellen</u> Wert&nbsp; $s_+(t = 0) \;\underline{=  1.8 \ \text{V}}$.
+
*In the above equation, for example,&nbsp;  $\omega_{60} = 2\pi (f_{\rm T} + f_{\rm N}) = 2\pi \cdot 60 \ \text{kHz}$.  
 +
*At time&nbsp; $t = 0$&nbsp; all three pointers point in the direction of the real axis (see left graph).
 +
*One obtains the <u>real value</u>&nbsp; $s_+(t = 0) \;\underline{=  1.8 \ \text{V}}$.
  
[[File:EN_Sig_A_4_4_ML.png|left|frame|Drei verschiedene analytische Signale]]
 
 
<br clear=all>
 
<br clear=all>
'''(2)'''&nbsp;  Die <u>erste Aussage</u> ist richtig und ergibt sich aus der [[Signal_Representation/Analytisches_Signal_und_zugehörige_Spektralfunktion#Darstellung_mit_der_Hilberttransformation|Hilbert-Transformation]]. Dagegen stimmen die nächsten beiden Aussagen nicht:  
+
'''(2)'''&nbsp;  The <u>first statement</u> is correct and results from the&nbsp; "Hilbert transform".&nbsp; On the other hand, the next two statements are'nt correct:
*$s_+(t)$&nbsp; ist stets eine komplexe Zeitfunktion mit Ausnahme des Grenzfalls&nbsp; $s(t) = 0$.  
+
*$s_+(t)$&nbsp; is always a complex time function with exception of the limiting case&nbsp; $s(t) \equiv 0$.  
*Jede komplexe Funktion hat jedoch zu einigen Zeitpunkten auch rein reelle Werte.
+
*However, every complex function also has purely real values at some points in time.
*Der Zeigerverbund dreht immer in mathematisch positiver Richtung.  
+
*The&nbsp; "pointer group"&nbsp; always rotates in a mathematically positive direction.  
*Überschreitet der Summenvektor die reelle Achse, so verschwindet zu diesem Zeitpunkt der Imaginärteil und&nbsp; $s_+(t)$&nbsp; ist rein reell.
+
*If the sum vector crosses the real axis, the imaginary part disappears at this point and&nbsp; $s_+(t)$&nbsp; is purely real.
  
  
  
'''(3)'''&nbsp;  Die Periodendauer des Trägersignals beträgt&nbsp; $T_0 = 1/f_T = 20 \ {\rm &micro;} \text{s}$.  
+
'''(3)'''&nbsp;  The period duration of the carrier signal is&nbsp; $T_0 = 1/f_T = 20 \ {\rm &micro;} \text{s}$.  
*Nach&nbsp; $t = 5 \ {\rm &micro;} \text{s}$&nbsp;  (siehe mittlere Grafik) hat sich der Träger somit um&nbsp; $90^{\circ}$&nbsp; gedreht.
+
*After&nbsp; $t = 5 \ {\rm &micro;} \text{s}$&nbsp;  (see middle graph) the carrier has thus rotated by&nbsp; $90^{\circ}$.
*Der blaue Zeiger (OSB) dreht um&nbsp; $20\%$&nbsp; schneller, der grüne (USB) um&nbsp; $20\%$&nbsp; langsamer als der rote Drehzeiger (Trägersignal):
+
*The blue pointer&nbsp; $\rm (OSB)$&nbsp; rotates&nbsp; $20\%$&nbsp; faster, the green one&nbsp; $\rm (USB)$&nbsp; $20\%$&nbsp; slower than the red rotary pointer (carrier signal):
 
   
 
   
 
:$$s_{+}({\rm 5 \hspace{0.05cm} {\rm &micro;}  s})  =  {\rm 1
 
:$$s_{+}({\rm 5 \hspace{0.05cm} {\rm &micro;}  s})  =  {\rm 1
Line 121: Line 122:
 
{\rm e}^{{\rm j}\hspace{0.05cm} 72^\circ }.$$
 
{\rm e}^{{\rm j}\hspace{0.05cm} 72^\circ }.$$
  
*Somit sind die in&nbsp; $ 5 \ {\rm &micro;} \text{s}$&nbsp; zurückgelegten Winkel von OSB und USB&nbsp; $108^{\circ}$&nbsp; bzw.&nbsp; $72^{\circ}$.  
+
*Thus, the angles travelled in&nbsp; $ 5 \ {\rm &micro;} \text{s}$&nbsp; by OSB and USB are&nbsp; $108^{\circ}$&nbsp; and&nbsp; $72^{\circ}$ respectively.  
*Da sich zu diesem Zeitpunkt die Realteile von OSB und USB kompensieren, ist&nbsp; $s_+(t=5  \ {\rm &micro;}  \text{s})$&nbsp; <u>rein imaginär</u> und man erhält:
+
*Since at this time the real parts of OSB and USB compensate,&nbsp; $s_+(t=5  \ {\rm &micro;}  \text{s})$&nbsp; is <u>purely imaginary</u> and we obtain:
 
   
 
   
 
:$${\rm Im}\left[s_{+}(t = {\rm 5 \hspace{0.05cm} {\rm &micro;}  s})\right] =
 
:$${\rm Im}\left[s_{+}(t = {\rm 5 \hspace{0.05cm} {\rm &micro;}  s})\right] =
Line 130: Line 131:
  
  
'''(4)'''&nbsp;  Nach einer Umdrehung des roten Trägers, also zum Zeitpunkt $t$ = $T_0 = 20 \ {\rm &micro;} \text{s}$ hat der blaue Zeiger bereits $72^{\circ}$ mehr zurückgelegt und der grüne Zeiger dementsprechend $72^{\circ}$ weniger. Die Summe der drei Zeiger ist wieder <u>rein reell</u> und ergibt entsprechend der  rechten Grafik:
+
'''(4)'''&nbsp;  After one rotation of the red carrier, i.e. at time $t$ = $T_0 = 20 \ {\rm &micro;} \text{s}$, the blue pointer has already covered&nbsp; $72^{\circ}$&nbsp; more and the green pointer correspondingly&nbsp; $72^{\circ}$&nbsp; less.&nbsp; The sum of the three pointers is again <u>real</u> and results in accordance with the graph on the right:
 
   
 
   
 
:$${\rm Re}\left[s_{+}({\rm 20 \hspace{0.05cm} {\rm &micro;}  s})\right] =
 
:$${\rm Re}\left[s_{+}({\rm 20 \hspace{0.05cm} {\rm &micro;}  s})\right] =
Line 137: Line 138:
  
  
'''(5)'''&nbsp; Der Betrag ist minimal, wenn die Zeiger der beiden Seitenbänder gegenüber dem Träger um&nbsp; $180^{\circ}$&nbsp; versetzt sind. Daraus folgt:
+
'''(5)'''&nbsp; The magnitude is minimum when the pointers of the two sidebands are offset from the carrier by&nbsp; $180^{\circ}$&nbsp;.&nbsp; It follows:
 
   
 
   
 
:$$|s_{+}(t)|_{\rm min} = {\rm 1 \hspace{0.05cm} V} - 2 \cdot {\rm
 
:$$|s_{+}(t)|_{\rm min} = {\rm 1 \hspace{0.05cm} V} - 2 \cdot {\rm
 
0.4 \hspace{0.05cm} V} \hspace{0.15 cm}\underline{= {\rm 0.2 \hspace{0.05cm} V}}.$$
 
0.4 \hspace{0.05cm} V} \hspace{0.15 cm}\underline{= {\rm 0.2 \hspace{0.05cm} V}}.$$
  
Innerhalb einer Periode&nbsp; $T_0$&nbsp; des Trägers tritt gegenüber den Zeigern der beiden Seitenbändern ein Phasenversatz von&nbsp; $\pm72^{\circ}$&nbsp; auf. Daraus folgt:  
+
Within one period&nbsp; $T_0$&nbsp; of the carrier, a phase offset of&nbsp; $\pm72^{\circ}$&nbsp; occurs with respect to the pointers of the two sidebands.&nbsp; From this follows:
 
:$$t_{\text{min}} = 180^{\circ}/72^{\circ} \cdot T_0 = 2.5 \cdot T_0  \;\underline{= 50 \ {\rm &micro;} \text{s}}.$$
 
:$$t_{\text{min}} = 180^{\circ}/72^{\circ} \cdot T_0 = 2.5 \cdot T_0  \;\underline{= 50 \ {\rm &micro;} \text{s}}.$$
 
{{ML-Fuß}}
 
{{ML-Fuß}}
  
 
__NOEDITSECTION__
 
__NOEDITSECTION__
[[Category:Exercises for Signal Representation|^4. Bandpassartige Signale^]]
+
[[Category:Signal Representation: Exercises|^4.2 Analytical Signal and its Spectral Function^]]

Latest revision as of 14:29, 7 May 2021

Spectrum of the analytical signal

We assume a cosine-shaped source signal  $q(t)$  with

  • amplitude  $A_{\rm N} = 0.8 \ \text{V}$  and
  • frequency  $f_{\rm N}= 10 \ \text{kHz}$.


The frequency conversion is done by means of  "Double-Sideband Amplitude Modulation with Carrier".

The modulated signal  $s(t)$  is with the (normalised) carrier  $z(t) = \text{cos}(\omega_{\rm T} \cdot t)$  and the DC component  $q_0 = 1 \ \text{V}$:

$$\begin{align*} s(t) & = \left(q_0 + q(t)\right) \cdot z(t)= \left({\rm 1 \hspace{0.05cm} V} + {\rm 0.8 \hspace{0.05cm}V}\cdot {\cos} ( \omega_{\rm N}\cdot t)\right) \cdot {\cos} ( \omega_{\rm T}\cdot t) = \\ & = q_0 \cdot {\cos} ( \omega_{\rm T}\cdot t) + {A_{\rm N}}/{2} \cdot {\cos} ( (\omega_{\rm T}+ \omega_{\rm N}) \cdot t) + {A_{\rm N}}/{2} \cdot {\cos} ( (\omega_{\rm T}- \omega_{\rm N}) \cdot t).\end{align*}$$

The first term describes the carrier, the second term the so-called upper sideband  $\rm (OSB)$  and the last term the lower sideband  $\rm (USB)$.

The sketch shows the spectrum  $S_+(f)$  of the corresponding analytical signal for  $f_{\rm T} = 50 \ \text{kHz}$. You can see

  • the carrier (red),
  • the upper sideband (blue),  and
  • the lower sideband (grün).


In subtask  (5)  the magnitude of  $s_+(t)$  is asked for.  This is the length of the resulting pointer.



Hints:

  1. The index  $\rm N$  stands for "source signal"   ⇒   (German:  "Nachrichtenignal").
  2. The index  $\rm T$  stands for  "carrier"   ⇒   (German:  "Trägersignal").
  3. $\rm OSB$  denotes the  "upper sideband"   ⇒   (German:  "oberes Seitenband").
  4. $\rm USB$  denotes the  "lower sideband"   ⇒   (German:  "unteres Seitenband").

Questions

1

What is the analytical signal  $s_+(t)$.  What is its magnitude at time  $t = 0$?

$\text{Re}[s_+(t=0)]\ = \ $

 $\text{V}$
$\text{Im}[s_+(t=0)]\ = \ $

 $\text{V}$

2

Which of the following statements are true?

$s_+(t)$  results from  $s(t)$, if  $\cos(\text{...})$  is replaced by  ${\rm e}^{{\rm j}(\text{...})}$ .
If  $s(t)$  is an even time function,  $s_+(t)$  is purely real.
At no time does the imaginary part of  $s_+(t)$ disappear.

3

What is the value of the analytical signal at time  $t = 5 \ {\rm µ}\text{s}$?

$\text{Re}[s_+(t=5 \ {\rm µ} \text{s})]\ = \ $

 $\text{V}$
$\text{Im}[s_+(t=5 \ {\rm µ} \text{s})]\ = \ $

 $\text{V}$

4

What is the value of  $s_+(t)$  at time  $t = 20 \ {\rm µ}\text{s}$?

$\text{Re}[s_+(t=20 \ {\rm µ} \text{s})]\ = \ $

 $\text{V}$
$\text{Im}[s_+(t=20 \ {\rm µ} \text{s})]\ = \ $

 $\text{V}$

5

What is the smallest possible pointer length?  At what time   $t_{\text{min}}$  does this value occur for the first time?

$|s_+(t)|_{\text{min}}\ = \ $

 $\text{V}$
$t_{\text{min}}\ = \ $

 ${\rm µ} \text{s}$


Solution

(1)  By inverse Fourier transform of  $S_+(f)$  taking into account the  "Shifting Theorem":

$$s_{+}(t) = {\rm 1 \hspace{0.05cm} V} \cdot {\rm e}^{{\rm j}\hspace{0.05cm} \omega_{\rm 50}\hspace{0.05cm} t } + {\rm 0.4 \hspace{0.05cm} V} \cdot {\rm e}^{{\rm j}\hspace{0.05cm} \omega_{\rm 60} \hspace{0.05cm} t }+ {\rm 0.4 \hspace{0.05cm} V} \cdot {\rm e}^{{\rm j}\hspace{0.05cm} \omega_{\rm 40}\hspace{0.05cm} t }.$$
Three different analytical signals
  • The expression describes the sum of three pointers rotating at different circular velocities.
  • In the above equation, for example,  $\omega_{60} = 2\pi (f_{\rm T} + f_{\rm N}) = 2\pi \cdot 60 \ \text{kHz}$.
  • At time  $t = 0$  all three pointers point in the direction of the real axis (see left graph).
  • One obtains the real value  $s_+(t = 0) \;\underline{= 1.8 \ \text{V}}$.


(2)  The first statement is correct and results from the  "Hilbert transform".  On the other hand, the next two statements are'nt correct:

  • $s_+(t)$  is always a complex time function with exception of the limiting case  $s(t) \equiv 0$.
  • However, every complex function also has purely real values at some points in time.
  • The  "pointer group"  always rotates in a mathematically positive direction.
  • If the sum vector crosses the real axis, the imaginary part disappears at this point and  $s_+(t)$  is purely real.


(3)  The period duration of the carrier signal is  $T_0 = 1/f_T = 20 \ {\rm µ} \text{s}$.

  • After  $t = 5 \ {\rm µ} \text{s}$  (see middle graph) the carrier has thus rotated by  $90^{\circ}$.
  • The blue pointer  $\rm (OSB)$  rotates  $20\%$  faster, the green one  $\rm (USB)$  $20\%$  slower than the red rotary pointer (carrier signal):
$$s_{+}({\rm 5 \hspace{0.05cm} {\rm µ} s}) = {\rm 1 \hspace{0.05cm} V} \cdot {\rm e}^{{\rm j}\hspace{0.05cm} 2 \pi \hspace{0.03cm} \cdot \hspace{0.08cm}50 \hspace{0.03cm} \cdot \hspace{0.08cm}0.005 } + {\rm 0.4 \hspace{0.05cm} V} \cdot {\rm e}^{{\rm j}\hspace{0.05cm} 2 \pi \hspace{0.03cm} \cdot \hspace{0.08cm}60 \hspace{0.03cm} \cdot \hspace{0.08cm}0.005 }+ {\rm 0.4 \hspace{0.05cm} V} \cdot {\rm e}^{{\rm j}\hspace{0.05cm} 2 \pi \hspace{0.03cm} \cdot \hspace{0.08cm}40 \hspace{0.03cm} \cdot \hspace{0.08cm}0.005 } = {\rm 1 \hspace{0.05cm} V} \cdot {\rm e}^{{\rm j}\hspace{0.05cm} 90^\circ }+ {\rm 0.4 \hspace{0.05cm} V} \cdot {\rm e}^{{\rm j}\hspace{0.05cm} 108^\circ }+{\rm 0.4 \hspace{0.05cm} V} \cdot {\rm e}^{{\rm j}\hspace{0.05cm} 72^\circ }.$$
  • Thus, the angles travelled in  $ 5 \ {\rm µ} \text{s}$  by OSB and USB are  $108^{\circ}$  and  $72^{\circ}$ respectively.
  • Since at this time the real parts of OSB and USB compensate,  $s_+(t=5 \ {\rm µ} \text{s})$  is purely imaginary and we obtain:
$${\rm Im}\left[s_{+}(t = {\rm 5 \hspace{0.05cm} {\rm µ} s})\right] = {\rm 1 \hspace{0.05cm} V} + 2 \cdot {\rm 0.4 \hspace{0.05cm} V}\cdot \cos (18^\circ ) \hspace{0.15 cm}\underline{= {\rm 1.761 \hspace{0.05cm} V}}.$$


(4)  After one rotation of the red carrier, i.e. at time $t$ = $T_0 = 20 \ {\rm µ} \text{s}$, the blue pointer has already covered  $72^{\circ}$  more and the green pointer correspondingly  $72^{\circ}$  less.  The sum of the three pointers is again real and results in accordance with the graph on the right:

$${\rm Re}\left[s_{+}({\rm 20 \hspace{0.05cm} {\rm µ} s})\right] = {\rm 1 \hspace{0.05cm} V} + 2 \cdot {\rm 0.4 \hspace{0.05cm} V}\cdot \cos (72^\circ ) \hspace{0.15 cm}\underline{= {\rm 1.236 \hspace{0.05cm} V}}.$$


(5)  The magnitude is minimum when the pointers of the two sidebands are offset from the carrier by  $180^{\circ}$ .  It follows:

$$|s_{+}(t)|_{\rm min} = {\rm 1 \hspace{0.05cm} V} - 2 \cdot {\rm 0.4 \hspace{0.05cm} V} \hspace{0.15 cm}\underline{= {\rm 0.2 \hspace{0.05cm} V}}.$$

Within one period  $T_0$  of the carrier, a phase offset of  $\pm72^{\circ}$  occurs with respect to the pointers of the two sidebands.  From this follows:

$$t_{\text{min}} = 180^{\circ}/72^{\circ} \cdot T_0 = 2.5 \cdot T_0 \;\underline{= 50 \ {\rm µ} \text{s}}.$$