Difference between revisions of "Mobile Communications/Non-Frequency-Selective Fading With Direct Component"
m (Guenter moved page Mobile Communications/Non-Frequency Selective Fading With Direct Component to Mobile Communications/Non-Frequency-Selective Fading With Direct Component) |
|||
(14 intermediate revisions by 3 users not shown) | |||
Line 7: | Line 7: | ||
== Channel model and Rice PDF == | == Channel model and Rice PDF == | ||
<br> | <br> | ||
− | The [[Mobile_Communications/Probability_Density_of_Rayleigh_Fading#Modeling_of_non-frequency_selective_fading| Rayleigh distribution]] describes the mobile communication channel under the assumption that there is no direct path and thus the multiplicative factor $z(t) = x(t) + {\rm j} \cdot y(t)$ is solely composed of diffusely scattered components. | + | The [[Mobile_Communications/Probability_Density_of_Rayleigh_Fading#Modeling_of_non-frequency_selective_fading| $\text{Rayleigh distribution}$]] describes the mobile communication channel under the assumption that there is no direct path and thus the multiplicative factor $z(t) = x(t) + {\rm j} \cdot y(t)$ is solely composed of diffusely scattered components. |
If a direct component $($Line of Sight, $\rm LoS)$ is present, it is necessary to add direct components $x_0$ and/or $y_0$ to the zero mean Gaussian processes $x(t)$ and $y(t)$: | If a direct component $($Line of Sight, $\rm LoS)$ is present, it is necessary to add direct components $x_0$ and/or $y_0$ to the zero mean Gaussian processes $x(t)$ and $y(t)$: | ||
Line 16: | Line 16: | ||
::<math>z(t) = x(t) + {\rm j} \cdot y(t) \hspace{0.1cm} \Rightarrow \hspace{0.1cm} z(t) +z_0 \hspace{0.05cm},\hspace{0.2cm} | ::<math>z(t) = x(t) + {\rm j} \cdot y(t) \hspace{0.1cm} \Rightarrow \hspace{0.1cm} z(t) +z_0 \hspace{0.05cm},\hspace{0.2cm} | ||
z_0 = x_0 + {\rm j} \cdot y_0\hspace{0.05cm}.</math> | z_0 = x_0 + {\rm j} \cdot y_0\hspace{0.05cm}.</math> | ||
− | The graph shows this '''Rice fading channel model'''. As a special case, the Rayleigh model results when $x_0 = y_0= 0$. | + | The graph shows this »'''Rice fading channel model'''«. As a special case, the Rayleigh model results when $x_0 = y_0= 0$. |
<br clear=all> | <br clear=all> | ||
− | The Rice fading model can be summarized as follows, see also [Hin08]<ref name = 'Hin08'>Hindelang, T.: | + | The Rice fading model can be summarized as follows, see also [Hin08]<ref name = 'Hin08'>Hindelang, T.: Mobile Communications. Lecture notes. Institute for Communications Engineering. Technical University of Munich, 2008.</ref>: |
− | *The real part $x(t)$ is | + | *The real part $x(t)$ is Gaussian distributed with mean value $x_0$ and variance $\sigma ^2$. |
− | *The imaginary part $y(t)$ is also | + | *The imaginary part $y(t)$ is also Gaussian distributed $($mean $y_0$, equal variance $\sigma ^2)$ and independent of $x(t)$.<br> |
− | *For $z_0 \ne 0$ the value $|z(t)|$ has a [[Theory_of_Stochastic_Signals/Further_distributions#Rice_PDF| Rice PDF]], from which the term "Rice fading" is derived. | + | *For $z_0 \ne 0$ the value $|z(t)|$ has a [[Theory_of_Stochastic_Signals/Further_distributions#Rice_PDF|$\text{Rice PDF}$]], from which the term "Rice fading" is derived. |
− | *To simplify the notation we set $|z(t)| = a(t)$. For $a < 0$ it's PDF is $f_a(a) \equiv 0$, for $a \ge 0$ the following equation applies, where $\rm I_0(\cdot)$ denotes the "modified Bessel–function" of zero order: | + | *To simplify the notation we set $|z(t)| = a(t)$. For $a < 0$ it's PDF is $f_a(a) \equiv 0$, for $a \ge 0$ the following equation applies, where $\rm I_0(\cdot)$ denotes the "modified Bessel–function" of zero order: |
− | ::<math>f_a(a) = \frac{a}{\sigma^2} \cdot {\rm exp} \big [ -\frac{a^2 + |z_0|^2}{2\sigma^2}\big ] \cdot {\rm I}_0 \left [ \frac{a \cdot |z_0|}{\sigma^2} \right ]\hspace{0.5cm}\text{ | + | ::<math>f_a(a) = \frac{a}{\sigma^2} \cdot {\rm exp} \big [ -\frac{a^2 + |z_0|^2}{2\sigma^2}\big ] \cdot {\rm I}_0 \left [ \frac{a \cdot |z_0|}{\sigma^2} \right ]\hspace{0.5cm}\text{with}\hspace{0.5cm}{\rm I }_0 (u) = {\rm J }_0 ({\rm j} \cdot u) = |
\sum_{k = 0}^{\infty} \frac{ (u/2)^{2k}}{k! \cdot \Gamma (k+1)} | \sum_{k = 0}^{\infty} \frac{ (u/2)^{2k}}{k! \cdot \Gamma (k+1)} | ||
\hspace{0.05cm}.</math> | \hspace{0.05cm}.</math> | ||
Line 45: | Line 45: | ||
:$$x_0 = 0.707,\ \ y_0 = -0.707.$$ | :$$x_0 = 0.707,\ \ y_0 = -0.707.$$ | ||
− | For the generation of the signals according to the above model, the [[Mobile_Communications/ | + | For the generation of the signals according to the above model, the [[Mobile_Communications/Statistical_Bindings_within_the_Rayleigh_Process#Doppler_frequency_and_its_distribution|$\text{maximum Doppler frequency}$]] $f_\text{D, max} = 100 \ \rm Hz$ was used as reference. |
− | The | + | The auto-correlation function $\rm (ACF)$ and power-spectral density $\rm (PSD)$ of Rayleigh and Rice differ only slightly, other than adjusted parameter values. The following applies: |
::<math>\varphi_z ({\rm \Delta}t)\Bigg |_{\hspace{0.1cm}{\rm Rice}} \hspace{-0.5cm} = \varphi_z ({\rm \Delta}t)\Bigg |_{\hspace{0.1cm}{\rm Rayleigh}} \hspace{-0.8cm} + |z_0|^2 \hspace{0.05cm},</math> | ::<math>\varphi_z ({\rm \Delta}t)\Bigg |_{\hspace{0.1cm}{\rm Rice}} \hspace{-0.5cm} = \varphi_z ({\rm \Delta}t)\Bigg |_{\hspace{0.1cm}{\rm Rayleigh}} \hspace{-0.8cm} + |z_0|^2 \hspace{0.05cm},</math> | ||
::<math> {\it \Phi}_z(f_{\rm D})\Bigg |_{\hspace{0.1cm}{\rm Rice}} \hspace{-0.5cm} = {\it \Phi}_z(f_{\rm D})\Bigg |_{\hspace{0.1cm}{\rm Rayleigh}} \hspace{-0.8cm} + |z_0|^2 \cdot \delta (f_{\rm D}) \hspace{0.05cm}.</math> | ::<math> {\it \Phi}_z(f_{\rm D})\Bigg |_{\hspace{0.1cm}{\rm Rice}} \hspace{-0.5cm} = {\it \Phi}_z(f_{\rm D})\Bigg |_{\hspace{0.1cm}{\rm Rayleigh}} \hspace{-0.8cm} + |z_0|^2 \cdot \delta (f_{\rm D}) \hspace{0.05cm}.</math> | ||
− | It is taken into account that the spectral representation of a DC component leads to a Dirac function.<br> | + | It is taken into account that the spectral representation of a DC component leads to a Dirac delta function.<br> |
<br clear= all> | <br clear= all> | ||
It should be noted about this graph: | It should be noted about this graph: | ||
Line 60: | Line 60: | ||
*The (logarithmic) representation of ⇒ $a(t) =|z(t)|$ shows that the red curve is usually above the blue one. This can also be read from the PDF $f_a(a)$ . | *The (logarithmic) representation of ⇒ $a(t) =|z(t)|$ shows that the red curve is usually above the blue one. This can also be read from the PDF $f_a(a)$ . | ||
− | *For the Rice channel, the error probability is lower than for Rayleigh when AWGN is taken into account, since the receiver gets | + | *For the Rice channel, the error probability is lower than for Rayleigh when AWGN is taken into account, since the receiver gets some usable energy via the Rice direct path. |
− | *The PDF $f_\phi(\phi)$ shows the preferred angle $\phi \approx 45^\circ$ of the given Rice channel The complex factor $z(t)$ is located mainly in the fourth quadrant because of $x_0 > 0$ and $y_0 < 0$ , whereas in the Rayleigh channel all quadrants are equally probable.<br> | + | *The PDF $f_\phi(\phi)$ shows the preferred angle $\phi \approx -45^\circ$ of the given Rice channel The complex factor $z(t)$ is located mainly in the fourth quadrant because of $x_0 > 0$ and $y_0 < 0$ , whereas in the Rayleigh channel all quadrants are equally probable.<br> |
− | ==Exercises | + | ==Exercises for the chapter== |
<br> | <br> | ||
− | [[Aufgaben:Exercise 1.6: Autocorrelation Function and | + | [[Aufgaben:Exercise 1.6: Autocorrelation Function and PSD with Rice Fading]] |
[[Aufgaben:Exercise 1.6Z: Comparison of Rayleigh and Rice]] | [[Aufgaben:Exercise 1.6Z: Comparison of Rayleigh and Rice]] | ||
Line 72: | Line 72: | ||
[[Aufgaben:Exercise 1.7: PDF of Rice Fading]] | [[Aufgaben:Exercise 1.7: PDF of Rice Fading]] | ||
− | == | + | ==References== |
{{Display}} | {{Display}} |
Latest revision as of 15:55, 3 February 2023
Contents
Channel model and Rice PDF
The $\text{Rayleigh distribution}$ describes the mobile communication channel under the assumption that there is no direct path and thus the multiplicative factor $z(t) = x(t) + {\rm j} \cdot y(t)$ is solely composed of diffusely scattered components.
If a direct component $($Line of Sight, $\rm LoS)$ is present, it is necessary to add direct components $x_0$ and/or $y_0$ to the zero mean Gaussian processes $x(t)$ and $y(t)$:
- \[x(t) \hspace{0.1cm} \Rightarrow \hspace{0.1cm} x(t) +x_0 \hspace{0.05cm}, \hspace{0.2cm} y(t) \hspace{0.1cm} \Rightarrow \hspace{0.1cm} y(t) +y_0\hspace{0.05cm},\]
- \[z(t) = x(t) + {\rm j} \cdot y(t) \hspace{0.1cm} \Rightarrow \hspace{0.1cm} z(t) +z_0 \hspace{0.05cm},\hspace{0.2cm} z_0 = x_0 + {\rm j} \cdot y_0\hspace{0.05cm}.\]
The graph shows this »Rice fading channel model«. As a special case, the Rayleigh model results when $x_0 = y_0= 0$.
The Rice fading model can be summarized as follows, see also [Hin08][1]:
- The real part $x(t)$ is Gaussian distributed with mean value $x_0$ and variance $\sigma ^2$.
- The imaginary part $y(t)$ is also Gaussian distributed $($mean $y_0$, equal variance $\sigma ^2)$ and independent of $x(t)$.
- For $z_0 \ne 0$ the value $|z(t)|$ has a $\text{Rice PDF}$, from which the term "Rice fading" is derived.
- To simplify the notation we set $|z(t)| = a(t)$. For $a < 0$ it's PDF is $f_a(a) \equiv 0$, for $a \ge 0$ the following equation applies, where $\rm I_0(\cdot)$ denotes the "modified Bessel–function" of zero order:
- \[f_a(a) = \frac{a}{\sigma^2} \cdot {\rm exp} \big [ -\frac{a^2 + |z_0|^2}{2\sigma^2}\big ] \cdot {\rm I}_0 \left [ \frac{a \cdot |z_0|}{\sigma^2} \right ]\hspace{0.5cm}\text{with}\hspace{0.5cm}{\rm I }_0 (u) = {\rm J }_0 ({\rm j} \cdot u) = \sum_{k = 0}^{\infty} \frac{ (u/2)^{2k}}{k! \cdot \Gamma (k+1)} \hspace{0.05cm}.\]
- The greater the direct path power $(|z_0|^2)$ compared to the power of the stray components $(2\sigma^2)$ the better suited for digital signal transmission is the mobile communication channel.
- If $|z_0| \gg \sigma$ $($factor $3$ or more$)$, the Rice PDF can be approximated accurately by a Gaussian distribution with mean $|z_0|$ and variance $\sigma^2$.
- In contrast to Rayleigh fading ⇒ $z_0 \equiv 0$, the phase at Rice fading is not equally distributed, but there is a preferred direction $\phi_0 = \arctan(y_0/x_0)$. Often one sets $y_0 = 0$ ⇒ $\phi_0 = 0$.
Example of signal behaviour with Rice fading
The diagram shows typical signal characteristics and density functions of two mobile communication channels:
- Rayleigh fading (blue curves) with
- $${\rm E}\big [|z(t))|^2\big ] = 2 \cdot \sigma^2 = 1,$$
- Rice fading (red curves) with same $\sigma$ and
- $$x_0 = 0.707,\ \ y_0 = -0.707.$$
For the generation of the signals according to the above model, the $\text{maximum Doppler frequency}$ $f_\text{D, max} = 100 \ \rm Hz$ was used as reference.
The auto-correlation function $\rm (ACF)$ and power-spectral density $\rm (PSD)$ of Rayleigh and Rice differ only slightly, other than adjusted parameter values. The following applies:
- \[\varphi_z ({\rm \Delta}t)\Bigg |_{\hspace{0.1cm}{\rm Rice}} \hspace{-0.5cm} = \varphi_z ({\rm \Delta}t)\Bigg |_{\hspace{0.1cm}{\rm Rayleigh}} \hspace{-0.8cm} + |z_0|^2 \hspace{0.05cm},\]
- \[ {\it \Phi}_z(f_{\rm D})\Bigg |_{\hspace{0.1cm}{\rm Rice}} \hspace{-0.5cm} = {\it \Phi}_z(f_{\rm D})\Bigg |_{\hspace{0.1cm}{\rm Rayleigh}} \hspace{-0.8cm} + |z_0|^2 \cdot \delta (f_{\rm D}) \hspace{0.05cm}.\]
It is taken into account that the spectral representation of a DC component leads to a Dirac delta function.
It should be noted about this graph:
- The real parts $x(t)$ of Rayleigh (blue) and Rice (red) only differ by the constant $x_0 = 0.707$. The statistical properties are otherwise the same: Gaussian PDF $f_x(x)$ with standard deviation $\sigma = 0.707$, either zero-mean (Rayleigh) or with mean $x_0$ (Rice).
- In the imaginary part $y(t)$ of the Rice distribution one can additionally recognize the direct component $y_0 = -0.707$. The (here not shown) PDF $f_y(y)$ is thus a Gaussian curve with the standard deviation $\sigma = 0. 707$ around the mean value $ y_0 = -0.707$, thus axisymmetrical to the shown PDF $f_x(x)$.
- The (logarithmic) representation of ⇒ $a(t) =|z(t)|$ shows that the red curve is usually above the blue one. This can also be read from the PDF $f_a(a)$ .
- For the Rice channel, the error probability is lower than for Rayleigh when AWGN is taken into account, since the receiver gets some usable energy via the Rice direct path.
- The PDF $f_\phi(\phi)$ shows the preferred angle $\phi \approx -45^\circ$ of the given Rice channel The complex factor $z(t)$ is located mainly in the fourth quadrant because of $x_0 > 0$ and $y_0 < 0$ , whereas in the Rayleigh channel all quadrants are equally probable.
Exercises for the chapter
Exercise 1.6: Autocorrelation Function and PSD with Rice Fading
Exercise 1.6Z: Comparison of Rayleigh and Rice
Exercise 1.7: PDF of Rice Fading
References
- ↑ Hindelang, T.: Mobile Communications. Lecture notes. Institute for Communications Engineering. Technical University of Munich, 2008.