Difference between revisions of "Aufgaben:Exercise 4.4: Pointer Diagram for DSB-AM"
Line 6: | Line 6: | ||
We assume a cosine-shaped source signal $q(t)$ with | We assume a cosine-shaped source signal $q(t)$ with | ||
− | *the amplitude $A_{\rm | + | *the amplitude $A_{\rm M} = 0.8 \ \text{V}$ and |
− | *the frequency $f_{\rm | + | *the frequency $f_{\rm M}= 10 \ \text{kHz}$. |
The frequency conversion is done by means of [[Modulation_Methods/Zweiseitenband-Amplitudenmodulation#ZSB-Amplitudenmodulation_mit_Tr.C3.A4ger|Double-Sideband Amplitude Modulation with Carrier]]. | The frequency conversion is done by means of [[Modulation_Methods/Zweiseitenband-Amplitudenmodulation#ZSB-Amplitudenmodulation_mit_Tr.C3.A4ger|Double-Sideband Amplitude Modulation with Carrier]]. | ||
− | The modulated signal $s(t)$ is with the (normalised) carrier $z(t) = \text{cos}(\omega_{\rm | + | The modulated signal $s(t)$ is with the (normalised) carrier $z(t) = \text{cos}(\omega_{\rm C} \cdot t)$ and the DC component $q_0 = 1 \ \text{V}$: |
:$$\begin{align*} s(t) & = \left(q_0 + q(t)\right) \cdot z(t)= \left({\rm 1 \hspace{0.05cm} | :$$\begin{align*} s(t) & = \left(q_0 + q(t)\right) \cdot z(t)= \left({\rm 1 \hspace{0.05cm} | ||
− | V} + {\rm 0.8 \hspace{0.05cm}V}\cdot {\cos} ( \omega_{\rm | + | V} + {\rm 0.8 \hspace{0.05cm}V}\cdot {\cos} ( \omega_{\rm M}\cdot t)\right) |
− | \cdot {\cos} ( \omega_{\rm | + | \cdot {\cos} ( \omega_{\rm C}\cdot t) = \\ & = q_0 \cdot {\cos} ( \omega_{\rm C}\cdot t) + |
− | {A_{\rm | + | {A_{\rm M}}/{2} \cdot {\cos} ( (\omega_{\rm C}+ \omega_{\rm M}) \cdot t) |
− | + {A_{\rm | + | + {A_{\rm M}}/{2} \cdot {\cos} ( (\omega_{\rm C}- \omega_{\rm M}) \cdot t).\end{align*}$$ |
The first term describes the carrier, the second term the so-called upper sideband (USB) and the last term the lower sideband (LSB). | The first term describes the carrier, the second term the so-called upper sideband (USB) and the last term the lower sideband (LSB). | ||
− | The sketch shows the spectrum $S_+(f)$ of the corresponding analytical signal for $f_{\rm | + | The sketch shows the spectrum $S_+(f)$ of the corresponding analytical signal for $f_{\rm C} = 50 \ \text{kHz}$. You can see |
*the carrier (red), | *the carrier (red), | ||
*the upper sideband (blue) and | *the upper sideband (blue) and |
Revision as of 15:19, 10 February 2021
We assume a cosine-shaped source signal $q(t)$ with
- the amplitude $A_{\rm M} = 0.8 \ \text{V}$ and
- the frequency $f_{\rm M}= 10 \ \text{kHz}$.
The frequency conversion is done by means of Double-Sideband Amplitude Modulation with Carrier.
The modulated signal $s(t)$ is with the (normalised) carrier $z(t) = \text{cos}(\omega_{\rm C} \cdot t)$ and the DC component $q_0 = 1 \ \text{V}$:
- $$\begin{align*} s(t) & = \left(q_0 + q(t)\right) \cdot z(t)= \left({\rm 1 \hspace{0.05cm} V} + {\rm 0.8 \hspace{0.05cm}V}\cdot {\cos} ( \omega_{\rm M}\cdot t)\right) \cdot {\cos} ( \omega_{\rm C}\cdot t) = \\ & = q_0 \cdot {\cos} ( \omega_{\rm C}\cdot t) + {A_{\rm M}}/{2} \cdot {\cos} ( (\omega_{\rm C}+ \omega_{\rm M}) \cdot t) + {A_{\rm M}}/{2} \cdot {\cos} ( (\omega_{\rm C}- \omega_{\rm M}) \cdot t).\end{align*}$$
The first term describes the carrier, the second term the so-called upper sideband (USB) and the last term the lower sideband (LSB).
The sketch shows the spectrum $S_+(f)$ of the corresponding analytical signal for $f_{\rm C} = 50 \ \text{kHz}$. You can see
- the carrier (red),
- the upper sideband (blue) and
- the lower sideband (grün).
In subtask (5) the magnitude of $s_+(t)$ is asked for. This is the length of the resulting pointer.
Hints:
- This task belongs to the chapter Analytical Signal and Its Spectral Function.
- You can check your solution with the interaction module Physikalisches Signal & Analytisches Signal .
Questions
Solution
- $$s_{+}(t) = {\rm 1 \hspace{0.05cm} V} \cdot {\rm e}^{{\rm j}\hspace{0.05cm} \omega_{\rm 50}\hspace{0.05cm} t } + {\rm 0.4 \hspace{0.05cm} V} \cdot {\rm e}^{{\rm j}\hspace{0.05cm} \omega_{\rm 60} \hspace{0.05cm} t }+ {\rm 0.4 \hspace{0.05cm} V} \cdot {\rm e}^{{\rm j}\hspace{0.05cm} \omega_{\rm 40}\hspace{0.05cm} t }.$$
The expression describes the sum of three pointers rotating at different angular velocities.
- In the above equation, for example, $\omega_{60} = 2\pi (f_{\rm T} + f_{\rm N}) = 2\pi \cdot 60 \ \text{kHz}$.
- At time $t = 0$ all three pointers point in the direction of the real axis (see left graph).
One obtains the purely real value $s_+(t = 0) \;\underline{= 1.8 \ \text{V}}$.
(2) The first statement is correct and results from the Hilbert transform. On the other hand, the next two statements are not correct:
- $s_+(t)$ is always a complex time function with the exception of the limiting case $s(t) = 0$.
- However, every complex function also has purely real values at some points in time.
- The pointer composite always rotates in a mathematically positive direction.
- If the sum vector crosses the real axis, the imaginary part disappears at this point and $s_+(t)$ is purely real.
(3) The period of the carrier signal is $T_0 = 1/f_T = 20 \ {\rm µ} \text{s}$.
- After $t = 5 \ {\rm µ} \text{s}$ (see middle graph) the carrier has thus rotated by $90^{\circ}$ gedreht.
- The blue pointer (USB) rotates $20\%$ faster, the green one (LSB) $20\%$ slower than the red rotary pointer (carrier signal):
- $$s_{+}({\rm 5 \hspace{0.05cm} {\rm µ} s}) = {\rm 1 \hspace{0.05cm} V} \cdot {\rm e}^{{\rm j}\hspace{0.05cm} 2 \pi \hspace{0.03cm} \cdot \hspace{0.08cm}50 \hspace{0.03cm} \cdot \hspace{0.08cm}0.005 } + {\rm 0.4 \hspace{0.05cm} V} \cdot {\rm e}^{{\rm j}\hspace{0.05cm} 2 \pi \hspace{0.03cm} \cdot \hspace{0.08cm}60 \hspace{0.03cm} \cdot \hspace{0.08cm}0.005 }+ {\rm 0.4 \hspace{0.05cm} V} \cdot {\rm e}^{{\rm j}\hspace{0.05cm} 2 \pi \hspace{0.03cm} \cdot \hspace{0.08cm}40 \hspace{0.03cm} \cdot \hspace{0.08cm}0.005 } = {\rm 1 \hspace{0.05cm} V} \cdot {\rm e}^{{\rm j}\hspace{0.05cm} 90^\circ }+ {\rm 0.4 \hspace{0.05cm} V} \cdot {\rm e}^{{\rm j}\hspace{0.05cm} 108^\circ }+{\rm 0.4 \hspace{0.05cm} V} \cdot {\rm e}^{{\rm j}\hspace{0.05cm} 72^\circ }.$$
- Thus, the angles travelled in $ 5 \ {\rm µ} \text{s}$ by USB and LSB are $108^{\circ}$ and $72^{\circ}$ respectively.
- Since at this time the real parts of USB and LSB compensate, $s_+(t=5 \ {\rm µ} \text{s})$ is purely imaginary and we obtain:
- $${\rm Im}\left[s_{+}(t = {\rm 5 \hspace{0.05cm} {\rm µ} s})\right] = {\rm 1 \hspace{0.05cm} V} + 2 \cdot {\rm 0.4 \hspace{0.05cm} V}\cdot \cos (18^\circ ) \hspace{0.15 cm}\underline{= {\rm 1.761 \hspace{0.05cm} V}}.$$
(4) After one revolution of the red carrier, i.e. at time $t$ = $T_0 = 20 \ {\rm µ} \text{s}$, the blue pointer has already covered $72^{\circ}$ more and the green pointer correspondingly $72^{\circ}$ less. The sum of the three pointers is again purely real and results in accordance with the graph on the right:
- $${\rm Re}\left[s_{+}({\rm 20 \hspace{0.05cm} {\rm µ} s})\right] = {\rm 1 \hspace{0.05cm} V} + 2 \cdot {\rm 0.4 \hspace{0.05cm} V}\cdot \cos (72^\circ ) \hspace{0.15 cm}\underline{= {\rm 1.236 \hspace{0.05cm} V}}.$$
(5) The magnitude is minimum when the pointers of the two sidebands are offset from the carrier by $180^{\circ}$ . It follows:
- $$|s_{+}(t)|_{\rm min} = {\rm 1 \hspace{0.05cm} V} - 2 \cdot {\rm 0.4 \hspace{0.05cm} V} \hspace{0.15 cm}\underline{= {\rm 0.2 \hspace{0.05cm} V}}.$$
Within one period $T_0$ of the carrier, a phase offset of $\pm72^{\circ}$ occurs with respect to the pointers of the two sidebands. From this follows:
- $$t_{\text{min}} = 180^{\circ}/72^{\circ} \cdot T_0 = 2.5 \cdot T_0 \;\underline{= 50 \ {\rm µ} \text{s}}.$$