Aufgaben:Exercise 3.6: Adaptive Multi Rate Codec

• Return to book

Tracks of the AMR codec

In the late 1990s,  a very flexible,  adaptive speech codec was developed and standardized in the form of  $\rm AMR$  codec.  This provides a total of eight different modes with data rates between  $4.75 \ \rm kbit/s$  and  $12.2 \ \rm kbit/s$.

The AMR codec,  like the full rate codec  $\rm (FRC)$  discussed in  $\text{Exercise 3.5}$,  includes both a short-term prediction  $\rm (LPC)$  and a long-term prediction  $\rm (LTP)$.  However,  these two components are realized differently from FRC.

The main difference between AMR and FRC is the encoding of the residual signal  $($after LPC and LTP$)$:

1. Instead of  "Regular Pulse Excitation"  $\rm (RPE)$,  here the  "Algebraic Code Excitation Linear Prediction"  $\rm (ACELP)$  is used.
2. From the fixed code book  $\rm (FCB)$,  for each subframe of  $5 \ \rm ms$  duration,  the  "FCB pulse"  and the  "FCB gain"  that best match the residual signal  $($for which the mean square error of the difference signal becomes minimum$)$  is selected.

Each entry in the fixed code book identifies a pulse where exactly  $10$  of  $40$  positions are occupied by  $\pm1$. 

In this regard it should be noted:

• The pulse is divided into five tracks with eight possible positions each, where track  $1$  contains the positions  $1,\ 6,\ 11$, ... , $36$  of the subframe and track  $5$  describes the positions  $5,\ 10,\ 15$, ... , $40$.

• In each track there are exactly two values  $\pm1$,  while all the other six values are  zero. 

• The two  $±1$-positions are each assigned three bits –   i.e. encoded with  "$000$", ... ,  "$111$".

• Another bit is used for the  "sign of the first-mentioned pulse",  where a  "$1$"  indicates a positive sign and a  "$0$"  a negative sign.

• If the pulse position of the second pulse is greater than that of the first pulse,  the second pulse has the same sign as the first,  otherwise the opposite.

• Thus,  seven bits per track are transmitted to the receiver,  plus five bits for the so-called  "FCB amplification.

In the diagram,  the  $35$  bits describing an FCB pulse are given as an example:

⇒   Track 1  includes

1. a positive pulse  $({\rm sign} = 1)$  at position  $\big [1$  (first possible position for track 1)  $\hspace{0.02cm}\text{plus}\hspace{0.2cm}0$ (bit specification for  "000") $= 1\big]$,
2. another positive pulse  $($since $110 > 000)$  at position  $\big [1 \hspace{0.2cm}\text{plus}\hspace{0.2cm}5$ (pulse spacing in each track) $\hspace{0.2cm}\text{mal}\hspace{0.2cm}6$ (bit specification for " 110") = $31\hspace{0.05cm}.$

Track 2 includes.

• a negative pulse (${\rm VZ} = 0$) at $2$ (first possible position for track 2) $\hspace{0.2cm}\text{plus}\hspace{0.2cm}5\hspace{0.2cm}\text{mal}\hspace{0.2cm}4$ (bit specification for " 100") = $22\hspace{0.05cm},$
• a positive pulse (sign reversal due to $011 > 100$) at position $2 \hspace{0.2cm}\text{plus}\hspace{0.2cm}5\hspace{0.2cm}\text{mal}\hspace{0.2cm}3$ (bit specification for " 011") = $17\hspace{0.05cm}.$

Hint:

• This exercise belongs to the chapter  "Speech Coding".

• When entering the pulse positions  $N_{1}$  denotes the first triple of bits and  $N_{2}$  the second.
• For example, for track  $2$  one would have to enter the values  $N_{1}=-22$  and  $N_{2}=+17$ .

Questions

1

How many bits describe a speech frame $($of duration  $20 \ \rm ms)$  in  $12.2 \ \rm kbit/s$ mode?

$N_{12.2} \ = \ $ $ \ \rm Bit$

2

How many bits are needed for FCB pulse and gain per frame?

$N_{\rm FCB} \ = \ $ $ \ \rm Bit$

3

How many bits are left for LPC and LTP?

$N_{\rm LPC/LTP} \ = \ $ $ \ \rm Bit$

4

What subframe pulse positions and signs does track  $3$ describe?
Follow the instructions for input on the input page.

$N_{1} \ = \ $

$N_{2} \ = \ $

5

What pulse positions including sign describe the track  $4$?

$N_{1} \ = \ $

$N_{2} \ = \ $

6

What pulse positions including sign describe the track  $5$?

$N_{1} \ = \ $

$N_{2} \ = \ $

Solution

Solution

(1)  With the data rate $12.2 \ \rm kbit/s$, exactly $\underline{244 \ \rm bit}$ results within $20 \ \rm ms$, while for example in $4.75 \ \rm kbit/s$ mode only $95 \ \rm bit$ is transmitted.

(2)  In each subframe, the FCB pulse requires $35 \ \rm bit$ (five tracks of seven bits each) and the FCB gain requires five bits.

• With four subframes, this gives $N_{\rm FCB} \underline{= 160 \ \rm bits}$.

(3)  This leaves the difference from (1) and (2), i.e. $N_{\rm LPC/LTP}\underline{ = 84 \rm bits}$.

(4)  The sign bit "$0$" indicates a negative first pulse.

• Because $001 < 011$, the second pulse has the same sign.
• The two amounts result in

$$|N_1| \ = \ 3 \hspace{0.1cm}{\rm(da \hspace{0.1cm} track \hspace{0.1cm}3)} + 5\cdot 1 \hspace{0.1cm} {\rm(bit\:specification \hspace{0.1cm} 001)} = 8\hspace{0.05cm}, $$

$$ |N_2| \ = \ 3 \hspace{0.1cm}{\rm(da \hspace{0.1cm} track \hspace{0.1cm}3)} + 5\cdot 3 \hspace{0.1cm} {\rm(bit\:specification \hspace{0.1cm} 011)} = 18\hspace{0.05cm}.$$

• Therefore, to be entered for the third track is $N_{1} \underline{ = -8}$ and $N_{2} \underline{ = -18}.$

(5)  In an analogous way, for track $4$ we obtain the values  $N_{1} \underline{ = +39}$  and  $N_{2} \underline{ = -14}$.

(6)  The fifth track provides  $N_{1} \underline{ =-30}$  and  $N_{2} \underline{ = +5}$