Exercise 3.7: GSM System Components

• Return to book

GSM system components Korrektur auch MOB 3.2Z

The diagram shows the entire GSM transmission path,  with the transmitter on the left and the receiver on the right.

The illustration refers only to speech transmission.  In GSM data transmission,  only the top block  $($speech encoder or decoder$)$  is replaced by another channel encoder or decoder  $($concatenation of two channel codes$)$.

The two respective lowest system components were already treated in detail in the exercises for the chapter  "Radio Interface".

In this exercise,  on the other hand,  some basic properties are queried from

• Speech encoders and speech decoders,

• convolutional encoder and convolutional decoder,

• interleaver and de-interleaver,  and

• encryption and decryption.

Hint: This exercise belongs to the chapter  "Entire GSM Transmission System".

Questions

1

Which statements are true for speech encoding/decoding?

	These are source coding components.
	They are components of channel coding.
	Redundancy is added by the speech encoder.
	Redundancy is removed by the speech encoder.

2

Which statements are true for the convolutional encoder or decoder?

	They are components of source coding.
	They are components of channel coding.
	Redundancy is added by the convolutional encoder.
	Redundancy is removed by the convolutional encoder.

3

Which statements are true for the interleaver and de-interleaver?

	The interleaver adds redundancy.
	The interleaver is used to distribute bundle errors.
	The interleaver has the most significance for the AWGN channel.

4

Which statements are true for encryption and decryption?

	Both serve data security in the sense of data protection.
	These components are for error correction.
	Encryption adds redundancy.
	GSM mostly uses symmetric encryption.

Solution

Solution

(1)  Correct are answers 1 and 4:

• The goal of speech coding is data compression and thus redundancy reduction.
• This is a typical task of source coding.

(2)  Correct are answers 2 and 3:

• Convolutional coding is a form of channel coding by which the receiver (convolutional decoder) is enabled to detect and possibly correct errors.
• The channel coder adds (meaningful) redundancy for this purpose, while the speech coder removes irrelevant redundancy.
• Often both components are implemented together or at least closely coordinated.
• This is then referred to as "joint source– and channel coding".

(3)  Only answer 2 is correct:

• The convolutional decoder has major problems when the transmission errors are clustered rather than statistically independent.
• The task of interleavers and de-interleavers is to break up such bunching errors and spread them over a larger period of time.
• The redundancy is not changed by this procedure.
• In the AWGN channel, bit errors occur statistically independently, so interleaver and de-interleaver can be omitted.

(4)  Correct are answers 1 and 4:

• Encryption and decryption - the counterpart on the receiving side - are used solely to protect user data from unauthorized access.
• They are not used for error correction, nor do they add redundancy.
• A distinction is made between symmetric and asymmetric encryption. GSM predominantly uses the first variant.