Difference between revisions of "Aufgaben:Exercise 1.4Z: Complex Nyquist Spectrum"

From LNTwww
Line 1: Line 1:
  
{{quiz-Header|Buchseite=Digitalsignalübertragung/Eigenschaften von Nyquistsystemen
+
{{quiz-Header|Buchseite=Digital_Signal_Transmission/Properties_of_Nyquist_Systems
 
}}
 
}}
  
  
[[File:P_ID1279__Dig_Z_1_4.png|right|frame|Komplexes Nyquistspektrum]]
+
[[File:P_ID1279__Dig_Z_1_4.png|right|frame|Complex Nyquist spectrum]]
Betrachtet wird ein Impuls  $g(t)$  mit Spektrum  $G(f)$  gemäß der Skizze. Man erkennt aus dieser Darstellung:
+
Consider a pulse  $g(t)$  with spectrum  $G(f)$  according to the sketch. One recognizes from this representation:
*Der Realteil von &nbsp;$G(f)$&nbsp; ist trapezförmig mit den Eckfrequenzen &nbsp;$f_{1} = 3 \, \rm kHz$&nbsp; und &nbsp;$f_{2} = 7 \, \rm kHz$. Im Bereich &nbsp;$|f| < f_{1}$&nbsp; gilt:  
+
*The real part of &nbsp;$G(f)$&nbsp; is trapezoidal with the corner frequencies &nbsp;$f_{1} = 3 \, \rm kHz$&nbsp; and &nbsp;$f_{2} = 7 \, \rm kHz$. In the range &nbsp;$|f| < f_{1}$&nbsp; holds:  
 
:$${\rm Re}\big[G(f)\big] = A = 10^{-4} \, \rm V/Hz.$$
 
:$${\rm Re}\big[G(f)\big] = A = 10^{-4} \, \rm V/Hz.$$
*Der Imaginärteil von &nbsp;$G(f)$&nbsp; wird für die Teilaufgaben '''(1)''' bis '''(5)''' stets zu &nbsp;${\rm Im}\big[G(f)\big] =0$&nbsp; angenommen. <br>In diesem Fall ist &nbsp;$g(t)$&nbsp; sicher ein Nyquistimpuls.
+
*The imaginary part of &nbsp;$G(f)$&nbsp; is always assumed to be &nbsp;${\rm Im}\big[G(f)\big] =0$&nbsp; for subtasks '''(1)''' to '''(5)'''. <br>In this case &nbsp;$g(t)$&nbsp; is certainly a Nyquist pulse.
*Ab der Teilaufgabe '''(6)''' hat der Imaginärteil &nbsp;${\rm Im}[G(f)]$&nbsp; im Bereich &nbsp;$f_{1} \leq | f | \leq f_{2}$&nbsp; einen Dreiecksverlauf mit den Werten &nbsp;$\pm B$&nbsp; bei den Dreieckspitzen.
+
*From subtask '''(6)''', the imaginary part &nbsp;${\rm Im}[G(f)]$&nbsp; in the range &nbsp;$f_{1} \leq | f | \leq f_{2}$&nbsp; has a triangular shape with the values &nbsp;$\pm B$&nbsp; at the triangle peaks.
  
  
Zu prüfen ist, ob der Impuls &nbsp;$g(t)$&nbsp; auch mit komplexem Spektrum der ersten Nyquistbedingung genügt:
+
It is necessary to check whether the pulse &nbsp;$g(t)$&nbsp; satisfies the first Nyquist condition even with complex spectrum:
 
:$$g(\nu
 
:$$g(\nu
 
T)  =  \left\{ \begin{array}{c} g_0  \\
 
T)  =  \left\{ \begin{array}{c} g_0  \\
 
  0 \\  \end{array} \right.\quad
 
  0 \\  \end{array} \right.\quad
\begin{array}{*{1}c} {\rm{f\ddot{u}r}}
+
\begin{array}{*{1}c} {\rm{for}}
\\  {\rm{f\ddot{u}r}}  \\ \end{array}\begin{array}{*{20}c}
+
\\  {\rm{for}}  \\ \end{array}\begin{array}{*{20}c}
 
\nu = 0 \hspace{0.05cm}, \\
 
\nu = 0 \hspace{0.05cm}, \\
 
\nu \ne 0  \hspace{0.1cm}.  \\
 
\nu \ne 0  \hspace{0.1cm}.  \\
 
\end{array}$$
 
\end{array}$$
  
Im Verlauf dieser Aufgabe wird auf folgende Beschreibungsgrößen Bezug genommen:
+
In the course of this exercise, reference is made to the following descriptive quantities:
*Die Nyquistfrequenz gibt den Symmetriepunkt des Flankenabfalls an:
+
*The Nyquist frequency gives the symmetry point of the rolloff:
 
:$$f_{\rm Nyq}= \frac{1}{2T}= \frac{f_1 +f_2 }
 
:$$f_{\rm Nyq}= \frac{1}{2T}= \frac{f_1 +f_2 }
 
{2 }\hspace{0.05cm}.$$
 
{2 }\hspace{0.05cm}.$$
*Der Rolloff–Faktor ist ein Maß für die Flankensteilheit:
+
*The rolloff factor is a measure of the transition steepness:
 
:$$r = \frac{f_2 -f_1 }
 
:$$r = \frac{f_2 -f_1 }
 
{f_2 +f_1 } \hspace{0.05cm}.$$
 
{f_2 +f_1 } \hspace{0.05cm}.$$
Line 32: Line 32:
  
  
''Hinweise:''  
+
''Notes:''  
*Die Aufgabe gehört zum  Kapitel&nbsp;  [[Digital_Signal_Transmission/Eigenschaften_von_Nyquistsystemen|Eigenschaften von Nyquistsystemen]].
+
*The exercise belongs to the chapter&nbsp;  [[Digital_Signal_Transmission/Properties_of_Nyquist_Systems|Properties of Nyquist Systems]].
 
   
 
   
*Als bekannt vorausgesetzt werden kann die Fourierrücktransformierte &nbsp;$g(t)$&nbsp; eines trapezförmigen Nyquistspektrums mit Rolloff&ndash;Faktor &nbsp;$r$:
+
*The Fourier retransform &nbsp;$g(t)$&nbsp; of a trapezoidal Nyquist spectrum with rolloff factor &nbsp;$r$ can be assumed to be known:
 
:$$g ( t )= g_0 \cdot {\rm si} \left ( {\pi \cdot
 
:$$g ( t )= g_0 \cdot {\rm si} \left ( {\pi \cdot
 
t}/{T}\right)\cdot {\rm si} \left ( {\pi \cdot r \cdot
 
t}/{T}\right)\cdot {\rm si} \left ( {\pi \cdot r \cdot
 
t}/{T}\right).$$
 
t}/{T}\right).$$
*Ein dreieckförmiges Tiefpass&ndash;Spektrum &nbsp;$G(f)$, das auf &nbsp;$| f | < f_{0}$&nbsp; begrenzt ist und bei dem &nbsp;$G(f = 0) = B$&nbsp; gilt, führt nach Fourierrücktransformation zur Zeitfunktion
+
*A triangular low&ndash;pass spectrum &nbsp;$G(f)$ limited to &nbsp;$| f | < f_{0}$&nbsp; and where &nbsp;$G(f = 0) = B$,&nbsp; after Fourier inverse transformation, leads to the time function
 
:$$g ( t )= B \cdot f_0 \cdot {\rm si}^2 \left ( {\pi f_0 t}\right)\hspace{0.05cm}.$$
 
:$$g ( t )= B \cdot f_0 \cdot {\rm si}^2 \left ( {\pi f_0 t}\right)\hspace{0.05cm}.$$
  
  
===Fragebogen===
+
===Questions===
  
 
<quiz display=simple>
 
<quiz display=simple>
  
{Für die ersten Teilfragen gelte &nbsp;$B = 0$. Wie groß ist die Nyquistfrequenz?
+
{For the first questions, let &nbsp;$B = 0$. What is the Nyquist frequency?
 
|type="{}"}
 
|type="{}"}
 
$f_{\rm Nyq} \ =  \ $ { 5 3% } $\ \rm kHz$
 
$f_{\rm Nyq} \ =  \ $ { 5 3% } $\ \rm kHz$
  
{Welcher Rolloff–Faktor &nbsp;$r$&nbsp; liegt hier vor?
+
{Which rolloff factor &nbsp;$r$&nbsp; is present here?
 
|type="{}"}
 
|type="{}"}
 
$r \ =  \ $ { 0.4 3% }  
 
$r \ =  \ $ { 0.4 3% }  
  
{Berechnen Sie den Maximalwert &nbsp;$g_{0}$&nbsp; des Nyquistimpulses &nbsp;$g(t)$.
+
{Calculate the maximum value &nbsp;$g_{0}$&nbsp; of the Nyquist pulse &nbsp;$g(t)$.
 
|type="{}"}
 
|type="{}"}
 
$g_{0} \ =  \ ${ 1 3% } $\ \rm V$
 
$g_{0} \ =  \ ${ 1 3% } $\ \rm V$
  
{Es gelte weiter &nbsp;$B=0$. Berechnen Sie &nbsp;$g(t)$&nbsp; für die Zeitpunkte &nbsp;$t = 100\, &micro; \rm s$&nbsp; und &nbsp;$t = 200\, &micro; \rm s$.
+
{Further let &nbsp;$B=0$. Calculate &nbsp;$g(t)$&nbsp; for the time points &nbsp;$t = 100\, &micro; \rm s$&nbsp; and &nbsp;$t = 200\, &micro; \rm s$.
 
|type="{}"}
 
|type="{}"}
 
$g(t = 100\, &micro; \rm s) \ =  \ $ { 0. } $\ \rm V$
 
$g(t = 100\, &micro; \rm s) \ =  \ $ { 0. } $\ \rm V$
 
$g(t = 200\, &micro; \rm s) \ =  \ $ { 0. } $\ \rm V$
 
$g(t = 200\, &micro; \rm s) \ =  \ $ { 0. } $\ \rm V$
  
{Berechnen Sie den Impulswert zur Zeit &nbsp;$t = 250\ &micro; \rm s$.
+
{Calculate the pulse value at time &nbsp;$t = 250\ &micro; \rm s$.
 
|type="{}"}
 
|type="{}"}
 
$g(t = 250\, &micro; \rm s) \ =  \ $ { 0. } $\ \rm V$
 
$g(t = 250\, &micro; \rm s) \ =  \ $ { 0. } $\ \rm V$
  
{Welche Aussagen treffen für &nbsp;$B \neq 0$&nbsp; zu? $G(f)$&nbsp; ist dann komplexwertig.
+
{Which statements are true for &nbsp;$B \neq 0$?&nbsp; $G(f)$&nbsp; is then complex-valued.
 
|type="[]"}
 
|type="[]"}
+Die Nyquistbedingung wird erfüllt, wenn die Dreieckfunktion wie in der Grafik zwischen &nbsp;$3 \, \rm kHz$&nbsp; und &nbsp;$7 \, \rm kHz$&nbsp; liegt.
+
+The Nyquist condition is satisfied if the triangle function is between &nbsp;$3 \, \rm kHz$&nbsp; and &nbsp;$7 \, \rm kHz$&nbsp; as in the diagram.
- Die Nyquistbedingung wird erfüllt, wenn die Dreieckfunktion symmetrisch zwischen &nbsp;$3 \, \rm kHz$&nbsp; und &nbsp;$5 \, \rm kHz$&nbsp; liegt.
+
- The Nyquist condition is fulfilled if the triangle function lies symmetrically between &nbsp;$3 \, \rm kHz$&nbsp; and &nbsp;$5 \, \rm kHz$.&nbsp;
+ Die Nyquistbedingung wird erfüllt, wenn die Dreieckfunktion symmetrisch zwischen &nbsp;$4.5 \, \rm kHz$&nbsp; und &nbsp;$5.5 \, \rm kHz$&nbsp; liegt.
+
+ The Nyquist condition is fulfilled if the triangle function lies symmetrically between &nbsp;$4.5 \, \rm kHz$&nbsp; and &nbsp;$5.5 \, \rm kHz$.&nbsp;  
  
  
{Berechnen Sie &nbsp;$g(t)$&nbsp; für &nbsp;$t = 250\, &micro; \rm s$&nbsp; und &nbsp;$B = A = 10^{–4} \, \rm V/Hz$ &nbsp; &rArr; &nbsp; komplexe Spektralfunktion.
+
{Calculate &nbsp;$g(t)$&nbsp; for &nbsp;$t = 250\, &micro; \rm s$&nbsp; and &nbsp;$B = A = 10^{–4} \, \rm V/Hz$ &nbsp; &rArr; &nbsp; complex spectral function.
 
|type="{}"}
 
|type="{}"}
 
$g(t = 250\ &micro; \rm s) \ =  \ $ { 0.162 3% } $\ \rm V$
 
$g(t = 250\ &micro; \rm s) \ =  \ $ { 0.162 3% } $\ \rm V$
Line 83: Line 83:
 
</quiz>
 
</quiz>
  
===Musterlösung===
+
===Solution===
 
{{ML-Kopf}}
 
{{ML-Kopf}}
'''(1)'''&nbsp; Die Nyquistfrequenz gibt den Symmetriepunkt des Flankenabfalls an. Es gilt:
+
'''(1)'''&nbsp; The Nyquist frequency specifies the symmetry point of the rolloff. The following holds true:
 
:$$f_{\rm Nyq}=  \frac{f_1 +f_2 }
 
:$$f_{\rm Nyq}=  \frac{f_1 +f_2 }
 
{2 }= \frac{3\, {\rm kHz} + 7\, {\rm kHz}} {2 } \hspace{0.1cm}\underline { = 5\, {\rm kHz}}
 
{2 }= \frac{3\, {\rm kHz} + 7\, {\rm kHz}} {2 } \hspace{0.1cm}\underline { = 5\, {\rm kHz}}
 
\hspace{0.05cm}.$$
 
\hspace{0.05cm}.$$
  
'''(2)'''&nbsp; Der Rolloff–Faktor ist ebenfalls durch die beiden Eckfrequenzen $f_{1}$ und $f_{2}$ festgelegt:
+
'''(2)'''&nbsp; The rolloff factor is also determined by the two corner frequencies $f_{1}$ and $f_{2}$:
 
:$$r = \frac{f_2 -f_1 }
 
:$$r = \frac{f_2 -f_1 }
 
{f_2 +f_1 } = \frac{7\, {\rm kHz} - 3\, {\rm kHz}} {7\, {\rm kHz}
 
{f_2 +f_1 } = \frac{7\, {\rm kHz} - 3\, {\rm kHz}} {7\, {\rm kHz}
 
+ 3\, {\rm kHz} }\hspace{0.1cm}\underline { = 0.4 }\hspace{0.05cm}.$$
 
+ 3\, {\rm kHz} }\hspace{0.1cm}\underline { = 0.4 }\hspace{0.05cm}.$$
  
'''(3)'''&nbsp; Bei einem Impuls mit reellem Tiefpass–Spektrum liegt das Maximum stets bei $t = 0$ und es gilt:
+
'''(3)'''&nbsp; For a pulse with real low–pass spectrum, the maximum is always at $t = 0$ and it holds:
 
:$$g_0 = g(t=0) =  \int_{-\infty}^{+\infty}G(f) \,{\rm d} f
 
:$$g_0 = g(t=0) =  \int_{-\infty}^{+\infty}G(f) \,{\rm d} f
 
  = A \cdot 2  f_{\rm Nyq} = 10^{-4 }\,\frac{\rm V}{\rm Hz}\cdot 2 \cdot 5 \cdot10^{3} \,{\rm
 
  = A \cdot 2  f_{\rm Nyq} = 10^{-4 }\,\frac{\rm V}{\rm Hz}\cdot 2 \cdot 5 \cdot10^{3} \,{\rm
 
  Hz}\hspace{0.1cm}\underline { = 1\,{\rm V}}\hspace{0.05cm}.$$
 
  Hz}\hspace{0.1cm}\underline { = 1\,{\rm V}}\hspace{0.05cm}.$$
  
'''(4)'''&nbsp; Beim Nyquistimpuls treten die äquidistanten Nulldurchgänge im Abstand $T = 1/(2f_{\rm Nyq}) = 100 \, \rm &micro; s$ auf. Daraus erhält man direkt:
+
'''(4)'''&nbsp; For the Nyquist pulse, the equidistant zero crossings occur at the interval $T = 1/(2f_{\rm Nyq}) = 100 \, \rm &micro; s$. From this one obtains directly:
 
:$$g(t= 100\,{\rm &micro; s}) = \ \hspace{0.1cm}\underline { g(T) = 0,}$$
 
:$$g(t= 100\,{\rm &micro; s}) = \ \hspace{0.1cm}\underline { g(T) = 0,}$$
 
:$$g(t= 200\,{\rm &micro; s}) = \  \hspace{0.1cm}\underline {g(2T) = 0}
 
:$$g(t= 200\,{\rm &micro; s}) = \  \hspace{0.1cm}\underline {g(2T) = 0}
 
  \hspace{0.05cm}.$$
 
  \hspace{0.05cm}.$$
Dieses Ergebnis folgt auch aus der angegebenen Gleichung mit $r = 0.4$:
+
This result also follows from the given equation with $r = 0.4$:
 
:$$g ( t )= g_0 \cdot {\rm si} \left ( {\pi \cdot
 
:$$g ( t )= g_0 \cdot {\rm si} \left ( {\pi \cdot
 
t}/{T}\right)\cdot {\rm si} \left ( {\pi \cdot 0.4 \cdot
 
t}/{T}\right)\cdot {\rm si} \left ( {\pi \cdot 0.4 \cdot
 
t}/{T}\right) \hspace{0.05cm}.$$
 
t}/{T}\right) \hspace{0.05cm}.$$
Verantwortlich dafür, dass die erste Nyquistbedingung erfüllt wird, ist der erste Term.
+
Responsible for satisfying the first Nyquist condition is the first term.
  
  
'''(5)'''&nbsp; Entsprechend der unter '''(4)''' angegebenen Gleichung gilt:
+
'''(5)'''&nbsp; According to the equation given in '''(4)''':
 
:$$g(t= 250\,{\rm &micro; s})= g_0 \cdot {\rm si}  ( {2.5 \cdot \pi
 
:$$g(t= 250\,{\rm &micro; s})= g_0 \cdot {\rm si}  ( {2.5 \cdot \pi
 
})\cdot {\rm si}  ( \pi )\hspace{0.1cm}\underline { = 0} \hspace{0.05cm}.$$
 
})\cdot {\rm si}  ( \pi )\hspace{0.1cm}\underline { = 0} \hspace{0.05cm}.$$
Diese Nullstelle ist auf den zweiten Term zurückzuführen und liegt nicht im Nyquist–Zeitraster $\nu T$
+
This zero is due to the second term and does not lie in the Nyquist time grid $\nu T$
  
  
'''(6)'''&nbsp; Für die folgende Herleitung gelte $g(t)= g_{\rm R}(t) +  g_{\rm I}(t) \hspace{0.05cm},$ wobei $g_{\rm R}(t)$ auf den Realteil und $g_{\rm I}(t)$ auf den Imaginärteil von $G(f)$ zurückgeht.  
+
'''(6)'''&nbsp; For the following derivation, let $g(t)= g_{\rm R}(t) +  g_{\rm I}(t) \hspace{0.05cm},$ where $g_{\rm R}(t)$ is the real part and $g_{\rm I}(t)$ is the imaginary part of $G(f)$.  
*Der erste Anteil ist dabei genau wie unter Punkt '''(4)''' berechnet:
+
*The first part is calculated exactly as in point '''(4)''':
 
:$$g_{\rm R} ( t )= g_0 \cdot {\rm si} \left ( {\pi \cdot
 
:$$g_{\rm R} ( t )= g_0 \cdot {\rm si} \left ( {\pi \cdot
 
t}/{T}\right)\cdot {\rm si} \left ( {\pi \cdot 0.4 \cdot
 
t}/{T}\right)\cdot {\rm si} \left ( {\pi \cdot 0.4 \cdot
 
t}/{T}\right) \hspace{0.05cm}.$$
 
t}/{T}\right) \hspace{0.05cm}.$$
*Zur Erfüllung des ersten Nyquistkriteriums muss für den Imaginärteil mit $1/T = 10 \, \rm kHz$ gelten:
+
*To satisfy the first Nyquist criterion, the following must hold for the imaginary part with $1/T = 10 \, \rm kHz$:
 
:$$\sum_{k = -\infty}^{+\infty} {\rm Im}\left[G \left ( f -
 
:$$\sum_{k = -\infty}^{+\infty} {\rm Im}\left[G \left ( f -
 
{k}/{T} \right)\right]= 0 \hspace{0.05cm}.$$
 
{k}/{T} \right)\right]= 0 \hspace{0.05cm}.$$
*Mit den gegebenen Eckfrequenzen $f_{1} = 3 \, \rm kHz$ und $f_{2} = 7 \ \rm kHz$ liegen die beiden Dreiecke um $\pm 5\, \rm kHz$, so dass obige Gleichung erfüllt ist.  
+
*With the given corner frequencies $f_{1} = 3 \, \rm kHz$ and $f_{2} = 7 \ \rm kHz$, the two triangles are around $\pm 5\, \rm kHz$, so the above equation is satisfied.
*Gleiches gilt für $f_{1} = 4.5\, \rm kHz$ und $f_{2} = 5.5 \, \rm kHz$.  
+
*The same is true for $f_{1} = 4.5\, \rm kHz$ and $f_{2} = 5.5 \, \rm kHz$.  
*Dagegen liegen die Dreieckspitzen mit $f_{1} = 3\, \rm kHz$ und $f_{2} = 5 \, \rm kHz$ bei $\pm 4 \ \rm kHz$.  
+
*In contrast, the triangle peaks with $f_{1} = 3\, \rm kHz$ and $f_{2} = 5 \, \rm kHz$ are at $\pm 4 \ \rm kHz$.  
*In diesem Fall löschen sich die Dreieckfunktionen durch die periodische Fortsetzung nicht aus und die Nyquistbedingung ist nicht erfüllt.
+
*In this case the triangle functions do not cancel due to the periodic continuation and the Nyquist condition is not fulfilled.
  
  
Richtig sind somit die <u>Lösungsvorschläge 1 und 3</u>.
+
Therefore the correct solutions are <u>1 and 3</u>.
  
  
'''(7)'''&nbsp; Mit dem Ergebnis &nbsp;$g_{\rm R}(2.5T) = 0$&nbsp; aus  '''(3)''' folgt &nbsp;$g(2.5T) = g_{\rm I}(2.5T)$, wobei &nbsp;$g_{\rm I}(t)$&nbsp; die Fourierrücktransformierte von ${\rm j}\cdot \ G_{\rm I}(f)$ ist. Es gilt:
+
'''(7)'''&nbsp; With the result &nbsp;$g_{\rm R}(2.5T) = 0$&nbsp; from '''(3)''', it follows &nbsp;$g(2.5T) = g_{\rm I}(2.5T)$, where &nbsp;$g_{\rm I}(t)$&nbsp; is the Fourier retransform of ${\rm j}\cdot \ G_{\rm I}(f)$. It holds:
 
:$${\rm j} \cdot G_{\rm I}(f)  = {\rm j} \cdot\left[ \delta(f + f_{\rm Nyq}) - \delta(f - f_{\rm Nyq})\right] \star D(f) \hspace{0.3cm}
 
:$${\rm j} \cdot G_{\rm I}(f)  = {\rm j} \cdot\left[ \delta(f + f_{\rm Nyq}) - \delta(f - f_{\rm Nyq})\right] \star D(f) \hspace{0.3cm}
 
\Rightarrow \hspace{0.3cm} g_{\rm I}(t)  = 2 \cdot {\rm sin}  ( 2
 
\Rightarrow \hspace{0.3cm} g_{\rm I}(t)  = 2 \cdot {\rm sin}  ( 2
 
  \pi\cdot f_{\rm Nyq} \cdot t )\cdot  d(t)\hspace{0.05cm}.$$
 
  \pi\cdot f_{\rm Nyq} \cdot t )\cdot  d(t)\hspace{0.05cm}.$$
*Die Sinusfunktion erzwingt die erforderlichen Nulldurchgänge bei Vielfachen von $T = 100 \, \rm &micro; s$.  
+
*The sine function enforces the required zero crossings at multiples of $T = 100 \, \rm &micro; s$.  
*$D(f)$ ist eine Dreieckfunktion um $f = 0$ mit $D(f = 0) = B$ und der einseitigen Breite $f_{0}= f_{2} – f_{\rm Nyq} = f_{\rm Nyq} – f_{1} = 2 \, \rm kHz$.  
+
*$D(f)$ is a triangular function around $f = 0$ with $D(f = 0) = B$ and one-sided width $f_{0}= f_{2} – f_{\rm Nyq} = f_{\rm Nyq} – f_{1} = 2 \, \rm kHz$.  
*Für die dazugehörige Zeitfunktion kann somit entsprechend der Angabe geschrieben werden:
+
*For the associated time function we can thus write according to the specification:
 
:$$g_{\rm I}(t )  = 2 \cdot B \cdot f_0 \cdot{\rm sin}  ( 2
 
:$$g_{\rm I}(t )  = 2 \cdot B \cdot f_0 \cdot{\rm sin}  ( 2
 
  \pi\cdot f_{\rm Nyq} \cdot t)\cdot {\rm si}^2(\pi\cdot f_{\rm 0} \cdot t) \hspace{0.05cm}.$$
 
  \pi\cdot f_{\rm Nyq} \cdot t)\cdot {\rm si}^2(\pi\cdot f_{\rm 0} \cdot t) \hspace{0.05cm}.$$
*Insbesondere gilt für den Zeitpunkt $t = 250 \, \rm &micro; s$  (grünes Quadrat):
+
*In particular, for time $t = 250 \, \rm &micro; s$  (green square):
 
:$$g(t = 2.5 T)  = g_{\rm I}(t = 2.5 T)  = \ 2 \cdot B \cdot f_0 \cdot{\rm sin}  ( 2.5
 
:$$g(t = 2.5 T)  = g_{\rm I}(t = 2.5 T)  = \ 2 \cdot B \cdot f_0 \cdot{\rm sin}  ( 2.5
 
  \pi )\cdot {\rm si}^2(\frac{\pi}{2}) = \  \frac{8}{\pi^2} \cdot 10^{-4 }\,\frac{\rm V}{\rm Hz}\cdot 2 \cdot 10^{3} \,{\rm
 
  \pi )\cdot {\rm si}^2(\frac{\pi}{2}) = \  \frac{8}{\pi^2} \cdot 10^{-4 }\,\frac{\rm V}{\rm Hz}\cdot 2 \cdot 10^{3} \,{\rm
Line 149: Line 149:
 
  V}} \hspace{0.05cm}.$$
 
  V}} \hspace{0.05cm}.$$
  
[[File:P_ID1283__Dig_Z_1_4g.png|right|frame|Unsymmetrischer Nyquistimpuls]]
+
[[File:P_ID1283__Dig_Z_1_4g.png|right|frame|Asymmetric Nyquist pulse]]
Die Grafik zeigt die Veränderung der Zeitfunktion aufgrund des Imaginärteils (grüner Zeitverlauf):  
+
The diagram shows the change of the time function due to the imaginary part (green time course):  
*Es ergibt sich nun ein unsymmetrischer Funktionsverlauf $g(t)$, der blau dargestellt ist.  
+
*The result is now an asymmetric function curve $g(t)$, shown in blue.
*Die Nulldurchgänge von $g_{\rm R}(t)$ im Abstand $T$ bleiben jedoch erhalten.
+
*However, the zero crossings of $g_{\rm R}(t)$ at the distance $T$ remain.
  
  

Revision as of 15:00, 8 March 2022


Complex Nyquist spectrum

Consider a pulse  $g(t)$  with spectrum  $G(f)$  according to the sketch. One recognizes from this representation:

  • The real part of  $G(f)$  is trapezoidal with the corner frequencies  $f_{1} = 3 \, \rm kHz$  and  $f_{2} = 7 \, \rm kHz$. In the range  $|f| < f_{1}$  holds:
$${\rm Re}\big[G(f)\big] = A = 10^{-4} \, \rm V/Hz.$$
  • The imaginary part of  $G(f)$  is always assumed to be  ${\rm Im}\big[G(f)\big] =0$  for subtasks (1) to (5).
    In this case  $g(t)$  is certainly a Nyquist pulse.
  • From subtask (6), the imaginary part  ${\rm Im}[G(f)]$  in the range  $f_{1} \leq | f | \leq f_{2}$  has a triangular shape with the values  $\pm B$  at the triangle peaks.


It is necessary to check whether the pulse  $g(t)$  satisfies the first Nyquist condition even with complex spectrum:

$$g(\nu T) = \left\{ \begin{array}{c} g_0 \\ 0 \\ \end{array} \right.\quad \begin{array}{*{1}c} {\rm{for}} \\ {\rm{for}} \\ \end{array}\begin{array}{*{20}c} \nu = 0 \hspace{0.05cm}, \\ \nu \ne 0 \hspace{0.1cm}. \\ \end{array}$$

In the course of this exercise, reference is made to the following descriptive quantities:

  • The Nyquist frequency gives the symmetry point of the rolloff:
$$f_{\rm Nyq}= \frac{1}{2T}= \frac{f_1 +f_2 } {2 }\hspace{0.05cm}.$$
  • The rolloff factor is a measure of the transition steepness:
$$r = \frac{f_2 -f_1 } {f_2 +f_1 } \hspace{0.05cm}.$$


Notes:

  • The Fourier retransform  $g(t)$  of a trapezoidal Nyquist spectrum with rolloff factor  $r$ can be assumed to be known:
$$g ( t )= g_0 \cdot {\rm si} \left ( {\pi \cdot t}/{T}\right)\cdot {\rm si} \left ( {\pi \cdot r \cdot t}/{T}\right).$$
  • A triangular low–pass spectrum  $G(f)$ limited to  $| f | < f_{0}$  and where  $G(f = 0) = B$,  after Fourier inverse transformation, leads to the time function
$$g ( t )= B \cdot f_0 \cdot {\rm si}^2 \left ( {\pi f_0 t}\right)\hspace{0.05cm}.$$


Questions

1

For the first questions, let  $B = 0$. What is the Nyquist frequency?

$f_{\rm Nyq} \ = \ $

$\ \rm kHz$

2

Which rolloff factor  $r$  is present here?

$r \ = \ $

3

Calculate the maximum value  $g_{0}$  of the Nyquist pulse  $g(t)$.

$g_{0} \ = \ $

$\ \rm V$

4

Further let  $B=0$. Calculate  $g(t)$  for the time points  $t = 100\, µ \rm s$  and  $t = 200\, µ \rm s$.

$g(t = 100\, µ \rm s) \ = \ $

$\ \rm V$
$g(t = 200\, µ \rm s) \ = \ $

$\ \rm V$

5

Calculate the pulse value at time  $t = 250\ µ \rm s$.

$g(t = 250\, µ \rm s) \ = \ $

$\ \rm V$

6

Which statements are true for  $B \neq 0$?  $G(f)$  is then complex-valued.

The Nyquist condition is satisfied if the triangle function is between  $3 \, \rm kHz$  and  $7 \, \rm kHz$  as in the diagram.
The Nyquist condition is fulfilled if the triangle function lies symmetrically between  $3 \, \rm kHz$  and  $5 \, \rm kHz$. 
The Nyquist condition is fulfilled if the triangle function lies symmetrically between  $4.5 \, \rm kHz$  and  $5.5 \, \rm kHz$. 

7

Calculate  $g(t)$  for  $t = 250\, µ \rm s$  and  $B = A = 10^{–4} \, \rm V/Hz$   ⇒   complex spectral function.

$g(t = 250\ µ \rm s) \ = \ $

$\ \rm V$


Solution

(1)  The Nyquist frequency specifies the symmetry point of the rolloff. The following holds true:

$$f_{\rm Nyq}= \frac{f_1 +f_2 } {2 }= \frac{3\, {\rm kHz} + 7\, {\rm kHz}} {2 } \hspace{0.1cm}\underline { = 5\, {\rm kHz}} \hspace{0.05cm}.$$

(2)  The rolloff factor is also determined by the two corner frequencies $f_{1}$ and $f_{2}$:

$$r = \frac{f_2 -f_1 } {f_2 +f_1 } = \frac{7\, {\rm kHz} - 3\, {\rm kHz}} {7\, {\rm kHz} + 3\, {\rm kHz} }\hspace{0.1cm}\underline { = 0.4 }\hspace{0.05cm}.$$

(3)  For a pulse with real low–pass spectrum, the maximum is always at $t = 0$ and it holds:

$$g_0 = g(t=0) = \int_{-\infty}^{+\infty}G(f) \,{\rm d} f = A \cdot 2 f_{\rm Nyq} = 10^{-4 }\,\frac{\rm V}{\rm Hz}\cdot 2 \cdot 5 \cdot10^{3} \,{\rm Hz}\hspace{0.1cm}\underline { = 1\,{\rm V}}\hspace{0.05cm}.$$

(4)  For the Nyquist pulse, the equidistant zero crossings occur at the interval $T = 1/(2f_{\rm Nyq}) = 100 \, \rm µ s$. From this one obtains directly:

$$g(t= 100\,{\rm µ s}) = \ \hspace{0.1cm}\underline { g(T) = 0,}$$
$$g(t= 200\,{\rm µ s}) = \ \hspace{0.1cm}\underline {g(2T) = 0} \hspace{0.05cm}.$$

This result also follows from the given equation with $r = 0.4$:

$$g ( t )= g_0 \cdot {\rm si} \left ( {\pi \cdot t}/{T}\right)\cdot {\rm si} \left ( {\pi \cdot 0.4 \cdot t}/{T}\right) \hspace{0.05cm}.$$

Responsible for satisfying the first Nyquist condition is the first term.


(5)  According to the equation given in (4):

$$g(t= 250\,{\rm µ s})= g_0 \cdot {\rm si} ( {2.5 \cdot \pi })\cdot {\rm si} ( \pi )\hspace{0.1cm}\underline { = 0} \hspace{0.05cm}.$$

This zero is due to the second term and does not lie in the Nyquist time grid $\nu T$


(6)  For the following derivation, let $g(t)= g_{\rm R}(t) + g_{\rm I}(t) \hspace{0.05cm},$ where $g_{\rm R}(t)$ is the real part and $g_{\rm I}(t)$ is the imaginary part of $G(f)$.

  • The first part is calculated exactly as in point (4):
$$g_{\rm R} ( t )= g_0 \cdot {\rm si} \left ( {\pi \cdot t}/{T}\right)\cdot {\rm si} \left ( {\pi \cdot 0.4 \cdot t}/{T}\right) \hspace{0.05cm}.$$
  • To satisfy the first Nyquist criterion, the following must hold for the imaginary part with $1/T = 10 \, \rm kHz$:
$$\sum_{k = -\infty}^{+\infty} {\rm Im}\left[G \left ( f - {k}/{T} \right)\right]= 0 \hspace{0.05cm}.$$
  • With the given corner frequencies $f_{1} = 3 \, \rm kHz$ and $f_{2} = 7 \ \rm kHz$, the two triangles are around $\pm 5\, \rm kHz$, so the above equation is satisfied.
  • The same is true for $f_{1} = 4.5\, \rm kHz$ and $f_{2} = 5.5 \, \rm kHz$.
  • In contrast, the triangle peaks with $f_{1} = 3\, \rm kHz$ and $f_{2} = 5 \, \rm kHz$ are at $\pm 4 \ \rm kHz$.
  • In this case the triangle functions do not cancel due to the periodic continuation and the Nyquist condition is not fulfilled.


Therefore the correct solutions are 1 and 3.


(7)  With the result  $g_{\rm R}(2.5T) = 0$  from (3), it follows  $g(2.5T) = g_{\rm I}(2.5T)$, where  $g_{\rm I}(t)$  is the Fourier retransform of ${\rm j}\cdot \ G_{\rm I}(f)$. It holds:

$${\rm j} \cdot G_{\rm I}(f) = {\rm j} \cdot\left[ \delta(f + f_{\rm Nyq}) - \delta(f - f_{\rm Nyq})\right] \star D(f) \hspace{0.3cm} \Rightarrow \hspace{0.3cm} g_{\rm I}(t) = 2 \cdot {\rm sin} ( 2 \pi\cdot f_{\rm Nyq} \cdot t )\cdot d(t)\hspace{0.05cm}.$$
  • The sine function enforces the required zero crossings at multiples of $T = 100 \, \rm µ s$.
  • $D(f)$ is a triangular function around $f = 0$ with $D(f = 0) = B$ and one-sided width $f_{0}= f_{2} – f_{\rm Nyq} = f_{\rm Nyq} – f_{1} = 2 \, \rm kHz$.
  • For the associated time function we can thus write according to the specification:
$$g_{\rm I}(t ) = 2 \cdot B \cdot f_0 \cdot{\rm sin} ( 2 \pi\cdot f_{\rm Nyq} \cdot t)\cdot {\rm si}^2(\pi\cdot f_{\rm 0} \cdot t) \hspace{0.05cm}.$$
  • In particular, for time $t = 250 \, \rm µ s$ (green square):
$$g(t = 2.5 T) = g_{\rm I}(t = 2.5 T) = \ 2 \cdot B \cdot f_0 \cdot{\rm sin} ( 2.5 \pi )\cdot {\rm si}^2(\frac{\pi}{2}) = \ \frac{8}{\pi^2} \cdot 10^{-4 }\,\frac{\rm V}{\rm Hz}\cdot 2 \cdot 10^{3} \,{\rm Hz}\hspace{0.1cm}\underline {= 0.162\,{\rm V}} \hspace{0.05cm}.$$
Asymmetric Nyquist pulse

The diagram shows the change of the time function due to the imaginary part (green time course):

  • The result is now an asymmetric function curve $g(t)$, shown in blue.
  • However, the zero crossings of $g_{\rm R}(t)$ at the distance $T$ remain.