Difference between revisions of "Aufgaben:Exercise 2.7Z: DSB-AM and Envelope Demodulator"

From LNTwww
 
(33 intermediate revisions by 4 users not shown)
Line 1: Line 1:
  
{{quiz-Header|Buchseite=Modulationsverfahren/Hüllkurvendemodulation
+
{{quiz-Header|Buchseite=Modulationsverfahren/Modulation_Methods/Envelope_Demodulation
 
}}
 
}}
  
[[File:P_ID1034__Mod_Z_2_7.png|right|]]
+
[[File:P_ID1034__Mod_Z_2_7.png|right|frame|Spectrum  $R_{\rm TP}(f)$  of the received signal in the equivalent low-pass range]]
Ausgegangen wird vom Quellensignal
+
Assume a source signal
$$ q(t)  =  2 \,{\rm V} \cdot \cos(2 \pi \cdot 2\,{\rm kHz} \cdot t ) +$$
+
:$$ q(t)  =  2 \,{\rm V} \cdot \cos(2 \pi \cdot 2\,{\rm kHz} \cdot t )   +  2 \,{\rm V} \cdot \sin(2 \pi \cdot 5\,{\rm kHz} \cdot t )\hspace{0.05cm}.$$
$$  +  2 \,{\rm V} \cdot \sin(2 \pi \cdot 5\,{\rm kHz} \cdot t )\hspace{0.05cm}.$$
+
This is modulated according to the modulation method  "DSB-AM with carrier"  and transmitted through an ideal channel.  The influence of noise can be disregarded.
Dieses wird entsprechend dem Modulationsverfahren „ZSB–AM mit Träger” moduliert und über einen idealen Kanal übertragen. Der Einfluss von Rauschen kann außer Acht gelassen werden.
 
  
  
Die nebenstehende Grafik zeigt das Spektrum $R_{TP}(f)$ des Empfangssignals im äquivalenten Tiefpassbereich, das sich aus Diraclinien bei $f = 0$ (herrührend vom Träger), bei $±2 kHz$ (herrührend vom Cosinusanteil) und bei $±5 kHz$ (herrührend vom Sinusanteil) zusammensetzt.
+
The graph shows the spectrum  $R_{\rm TP}(f)$  of the received signal in the equivalent low-pass region,  which is composed of Dirac delta lines
 +
*at   $f = 0$  (originating from the carrier), 
 +
*at  $±2\ \rm  kHz$  (originating from the cosine component)  and
 +
*at  $±5\ \rm  kHz$  (originating from the sine component). 
  
  
Als Ortskurve bezeichnet man die Darstellung des äquivalenten Tiefpass–Signals $r_{TP}(t)$ in der komplexen Ebene, wobei $r_{TP}(t)$ die Fourierrücktransformierte von $R_{TP}(f)$ angibt.
+
The locus curve is the plot of the equivalent low-pass signal  $r_{\rm TP}(t)$  in the complex plane,  where  $r_{\rm TP}(t)$  is the Fourier retransform of  $R_{\ \rm  TP}(f)$ .
  
'''Hinweis:''' Diese Aufgabe bezieht sich auf das [http://en.lntwww.de/Modulationsverfahren/H%C3%BCllkurvendemodulation Kapitel 2.3]
 
  
===Fragebogen===
+
 
 +
 
 +
 
 +
Hints:
 +
*This exercise belongs to the chapter  [[Modulation_Methods/Envelope_Demodulation|Envelope Demodulation]].
 +
*Particular reference is made to the section  [[Modulation_Methods/Envelope_Demodulation#Description_using_the_equivalent_low-pass_signal|Description using the equivalent low-pass signal]].
 +
 +
 
 +
 
 +
===Questions===
  
 
<quiz display=simple>
 
<quiz display=simple>
  
{Schätzen Sie den maximalen Betrag des Quellensignals ab.
+
{Estimate the maximum magnitude &nbsp;$q_{\rm max} = {\rm Max} |q(t)|$&nbsp; of the source signal.
 
|type="{}"}
 
|type="{}"}
$q_{max} = max |q(t)|$ = { 4 3%  } $V$
+
$q_{\rm max} \ = \ $ { 4 3%  } $\ \rm V$
  
{Wie groß ist die Amplitude $A_T$ des beim Sender zugesetzten Trägersignals? Welcher Modulationsgrad m ergibt sich hieraus?
+
{What is the amplitude &nbsp;$A_{\rm T}$&nbsp; of the carrier signal added at the transmitter?&nbsp; What modulation depth &nbsp;$m$&nbsp; results from this?
 
|type="{}"}
 
|type="{}"}
$A_T$ = { 4 3%  } $V$
+
$A_{\rm T} \ = \ $ { 4 3%  } $\ \rm V$
$m$ = { 1 3% }  
+
$m \ = \ $ { 1 3% }  
  
{Was spricht hier für oder gegen die Verwendung eines Hüllkurvendemodulators (HKD)? Die Alternative wäre ein Synchrondemodulator (SD).
+
{Which of these are arguments for or against using an envelope demodulator?&nbsp;  Assume the alternative would be a synchronous demodulator.
 
|type="[]"}
 
|type="[]"}
- Mit dem HKD ist keine verzerrungsfreie Demodulation möglich.
+
- With the envelope demodulator,&nbsp; distortion-free demodulation is not possible in the example considered.  
+ Man kann auf die Frequenz–/Phasensynchronisation verzichten.
+
+ One can do demodulation without frequency and phase synchronization.
+ Mit einem SD würde eine kleinere Sendeleistung genügen.
+
+ A smaller transmission power would be needed using a synchronous demodulator.
  
{Berechnen Sie durch Fourierrücktransformation von $R_{TP}(f)$ das äquivalente TP–Signal $r_{TP}(t)$ ⇒  „Ortskurve”. Welche Aussagen treffen zu?
+
{Calculate the equivalent low-pass signal &nbsp;$r_{\rm TP}(t)$ &nbsp; ⇒ &nbsp; "locus curve", &nbsp;using the Fourier retransform of &nbsp;$R_{\rm TP}(f)$.&nbsp; Which statements are true?
 
|type="[]"}
 
|type="[]"}
+ Die Ortskurve rTP(t) setzt sich aus fünf Zeigern zusammen.
+
+ The locus curve &nbsp;$r_{\rm TP}(t)$&nbsp; is composed of five pointers.
- Der Träger rotiert mit der Drehgeschwindigkeit $ω_T$.
+
- The carrier rotates with a rotation speed &nbsp;$ω_{\rm T}$.
+ Die Drehzeiger der negativen Frequenzen drehen im Uhrzeigersinn.
+
+ The rotational pointers of the negative frequencies rotate clockwise.
- Der Zeiger für 2 kHz dreht doppelt so schnell als der für 5 kHz.
+
- The pointer for &nbsp;$2 \ \rm  kHz$&nbsp; rotates twice as fast as the one for &nbsp;$5 \ \rm  kHz$.
  
{ Welche Aussagen sind anhand der Ortskurve möglich? Beantworten Sie hierzu folgende Fragen hinsichtlich der Anwendung von Hüllkurvendemodulation.
+
{Which statements can be made based on the locus curve?&nbsp; Answer the following questions by considering the application of envelope demodulation.
 
|type="[]"}
 
|type="[]"}
+ Eine verzerrungsfreie Demodulation ist nur möglich, wenn $r_TP(t)$ für alle Zeiten reell ist.
+
+ A distortionless demodulation is only possible when &nbsp;$r_{\rm TP}(t)$&nbsp; is real at all times.
+ Eine verzerrungsfreie Demodulation ist nur möglich, wenn $r_TP(t)$ zu keinem Zeitpunkt negativ wird.
+
+ A distortionless demodulation is only possible when &nbsp;$r_{\rm TP}(t)$&nbsp; does not become negative at any point in time.
- Sind die beiden erstgenannten Bedingungen nicht erfüllt, so komt es zu linearen Verzerrungen.
+
- If the first two conditions mentioned are not met,&nbsp; linear distortions will occur.
 
</quiz>
 
</quiz>
  
===Musterlösung===
+
===Solution===
 
{{ML-Kopf}}
 
{{ML-Kopf}}
'''1.''' Die folgende Grafik zeigt, dass das Quellensignal alle Werte zwischen –4 V und +3.667 V annehmen kann. Der maximale Betrag tritt zum Beispiel zum Zeitpunkt t = 0.75 ms auf:
+
[[File:EN_Mod_Z_2_7_a.png|right|frame|Source signal in the region up to&nbsp; $1\text{ ms}$]]
$$q(t = 0.75 \,{\rm ms})  =  2 \,{\rm V} \cdot \cos(2 \pi \cdot 2\,{\rm kHz} \cdot 0.75 \,{\rm ms} ) + 2 \,{\rm V} \cdot \sin(2 \pi \cdot 5\,{\rm kHz} \cdot 0.75 \,{\rm ms} )$$
+
'''(1)'''&nbsp; The graph shows that the source signal can take on all values between &nbsp; $–4 \ \rm V$&nbsp; and&nbsp; $+3.667\ \rm  V$.&nbsp; 
$$ =  2 \,{\rm V} \cdot \cos(3 \pi) + 2 \,{\rm V} \cdot \sin(7.5 \pi)= -4 \,{\rm V}\hspace{0.05cm}.$$
+
*For example,&nbsp; the maximum magnitude occurs at time &nbsp; $t = t_0 =0.75\ \rm  ms$:
[[File:P_ID1035__Mod_Z_2_7_a.png|right|]]
+
:$$q(t = t_0)  =  2 \,{\rm V} \cdot \cos(2 \pi \cdot 2\,{\rm kHz} \cdot t_0 ) + 2 \,{\rm V} \cdot \sin(2 \pi \cdot 5\,{\rm kHz} \cdot t_0 )$$
Daraus folgt $q_{max} = 4 V$.
+
:$$\Rightarrow \hspace{0.3cm}q(t = 0.75 \,{\rm ms})  =  2 \,{\rm V} \cdot \cos(3 \pi) + 2 \,{\rm V} \cdot \sin(7.5 \pi)= -4 \,{\rm V}\hspace{0.05cm}.$$
 +
*From this,&nbsp; it follows for the maximum magnitude: &nbsp; $q_{\rm max}\hspace{0.15cm}\underline{ = 4 \ \rm V}$.
 +
 
 +
 
 +
 
 +
'''(2)'''&nbsp; In the graph on the information page,&nbsp; the weight of the Dirac delta line at&nbsp; $f = 0$&nbsp; indicates the amplitude of the added carrier.&nbsp; This is&nbsp; $A_{\rm T}\hspace{0.15cm}\underline{ = 4\ \rm V }$.  
 +
*From this,&nbsp; we get the modulation depth&nbsp; $m = q_{\rm max}/A_{\rm T} \hspace{0.15cm}\underline{ = 1}$.
 +
 
  
  
'''2.''' In der Grafik auf der Angabenseite gibt das Gewicht der Diraclinie bei $f = 0$ die Amplitude des zugesetzten Trägers an. Diese ist $A_T = 4 V$. Daraus erhält man den Modulationsgrad $m = q_{max}/A_T = 1$.
+
'''(3)'''&nbsp;<u>Answers 2 and 3</u>&nbsp; are correct:
 +
*Since the modulation depth is not greater than&nbsp; $m = 1$,&nbsp; the envelope demodulator does not cause distortion either.
 +
*The main advantage of envelope demodulation is that no frequency and phase synchronization is necessary.
 +
*A disadvantage is that a significantly higher power must be applied at the transmitter relative to synchronous demodulation.  
 +
*When&nbsp; $m = 1$,&nbsp; this results in three times the transmit power compared to DSB-AM without a carrier.
  
  
'''3.'''Da der Modulationsgrad nicht größer als 1 ist, führt auch der Hüllkurvendemodulator (HKD) nicht zu Verzerrungen. Der wesentliche Vorteil der HKD ist, dass keine Frequenz– und Phasensynchronität notwendig ist. Nachteilig ist, dass im Gegensatz zur Synchrondemodulation beim Sender eine deutlich höhere Leistung aufgebracht werden muss. Bei m = 1 ergibt sich gegenüber der ZSB–AM ohne Träger die dreifache Sendeleistung. Richtig sind also die Lösungsvorschläge 2 und 3.
 
  
 +
[[File:P_ID1036__Mod_Z_2_7_d.png|right|frame|Equivalent low-pass signal <br>in the complex plane]]
 +
'''(4)'''&nbsp; <u>Answers 1 and 3</u>&nbsp; are correct:&nbsp; When&nbsp; $ω_2 = 2 π · 2 \ \rm kHz$&nbsp; and&nbsp; $ω_5 = 2 π · \ \rm 5 kHz$:
 +
:$$ r_{\rm TP}(t) = 4 \,{\rm V} \hspace{-0.05cm}+\hspace{-0.05cm} 1 \,{\rm V} \cdot {\rm e}^{{\rm j} \cdot \hspace{0.03cm}\omega_{\rm 2}\cdot \hspace{0.03cm}t} \hspace{-0.05cm}+\hspace{-0.05cm} 1 \,{\rm V} \cdot {\rm e}^{-{\rm j} \cdot \hspace{0.03cm}\omega_{\rm 2}\cdot \hspace{0.03cm}t}
 +
\hspace{-0.05cm}-\hspace{-0.05cm} \hspace{0.15cm}{\rm j} \cdot1 \,{\rm V} \cdot {\rm e}^{{\rm j} \cdot \hspace{0.03cm}\omega_{\rm 5}\cdot \hspace{0.03cm}t} \hspace{-0.05cm}+\hspace{-0.05cm} {\rm j} \cdot1 \,{\rm V} \cdot {\rm e}^{-{\rm j} \cdot \hspace{0.03cm}\omega_{\rm 5}\cdot \hspace{0.03cm}t} \hspace{0.05cm}. \hspace{0.1cm}$$
 +
Thus,&nbsp; in constructing the locus &nbsp; $r_{TP}(t)$,&nbsp; there are exactly five pointers to consider &nbsp; &rArr; &nbsp; answer 1 is correct.&nbsp; The graph shows a snapshot at time &nbsp; $t = 0$.
 +
*The (red) carrier is given by the real pointer of length&nbsp; $4 \ \rm V$ for all time points.&nbsp;  In contrast to the pointer diagram&nbsp; (showing the analytic signal),&nbsp; this does not rotate &nbsp; &rArr; &nbsp;  Answer 2 is false.
 +
*The third statement is similarly correct:&nbsp; The rotating pointers at negative frequencies rotate in mathematically negative direction&nbsp; ("clockwise")&nbsp; in contrast to the two pointers with&nbsp; $f > 0$.
 +
*The last statement is false.&nbsp;  The larger the frequency &nbsp; $f$,&nbsp; the faster the associated pointer rotates.
  
[[File:P_ID1036__Mod_Z_2_7_d.png|right|]]
 
'''4.'''  Mit $ω_2 = 2 π · 2 kHz$ und $ω_5 = 2 π · 5 kHz$ gilt:
 
$$ r_{\rm TP}(t) = 4 \,{\rm V} + 1 \,{\rm V} \cdot {\rm e}^{{\rm j} \cdot \hspace{0.03cm}\omega_{\rm 2}\cdot \hspace{0.03cm}t} + 1 \,{\rm V} \cdot {\rm e}^{-{\rm j} \cdot \hspace{0.03cm}\omega_{\rm 2}\cdot \hspace{0.03cm}t}$$
 
$$- \hspace{0.15cm}{\rm j} \cdot1 \,{\rm V} \cdot {\rm e}^{{\rm j} \cdot \hspace{0.03cm}\omega_{\rm 5}\cdot \hspace{0.03cm}t} + {\rm j} \cdot1 \,{\rm V} \cdot {\rm e}^{-{\rm j} \cdot \hspace{0.03cm}\omega_{\rm 5}\cdot \hspace{0.03cm}t} \hspace{0.05cm}. \hspace{0.1cm}$$
 
Bei der Konstruktion der Ortskurve $r_{TP}(t)$ sind somit genau fünf Zeiger zu berücksichtigen. Die Grafik zeigt eine Momentanaufnahme zum Zeitpunkt t = 0.
 
  
Der (rote) Träger ist für alle Zeiten durch den reellen Zeiger der Länge 4 V gegeben. Im Gegensatz zum Zeigerdiagramm (Darstellung des analytischen Signals) dreht dieser nicht.
 
  
Die dritte Aussage ist ebenso wie die Aussage 1 richtig: Die Drehzeiger bei negativen Frequenzen drehen in mathematisch negativer Richtung (im Uhrzeigersinn) im Gegensatz zu den beiden Zeigern mit f > 0. Die Aussagen 2 und 4 treffen dagegen nicht zu.
+
[[File:P_ID1037__Mod_Z_2_7_e.png|right|frame|Locus curve for <br>distortionless envelope demodulation]]
 +
'''(5)'''&nbsp; <u>Statements 1 and 2</u>&nbsp; are correct:
  
[[File:P_ID1037__Mod_Z_2_7_e.png|right|]]
+
*In the example considered,&nbsp; the equivalent low-pass signal can be written as:
'''5.'''Im betrachteten Beispiel kann für das äquivalente TP–Signal auch geschrieben werden:
+
:$$r_{\rm TP}(t) = q(t) + A_{\rm T} \hspace{0.05cm}.$$
$$r_{\rm TP}(t) = q(t) + A_{\rm T} \hspace{0.05cm}.$$
+
*Thus,&nbsp; it is obvious that &nbsp; $r_{\rm TP}(t)$&nbsp; is always real.&nbsp;
Damit ist offensichtlich, dass $r_{TP}(t)$ stets reell ist. Aus a) und b) folgt weiter $r_{TP}(t) ≥ 0$ ist.
+
*Moreover,&nbsp; it follows from subtasks&nbsp; '''(1)'''&nbsp; and&nbsp; '''(2)'''&nbsp; that &nbsp; $r_{\rm TP}(t) ≥ 0$.
Das bedeutet:
 
  
  
Die Ortskurve ist hier eine horizontale Gerade auf der reellen Gerade und liegt stets in der rechten Halbebene. Dies sind die beiden notwendigen Bedingungen, dass mit einem Hüllkurvendemodulator das Nachrichtensignal verzerrungsfrei wiedergewonnen werden kann. Ist eine dieser Voraussetzungen nicht erfüllt, so kommt es zu $\text{nichtlinearen}$ Verzerrungen. Das bedeutet, dass der letzte Lösungsvorschlag falsch ist. Richtig sind dagegen die Aussagen 1 und 2.
+
This means:
 +
#Here, the locus curve is a horizontal line on the real plane and always lies in the right half-plane.
 +
#These are the two necessary conditions for an envelope demodulator to recover the signal without distortion.
 +
#If one of these conditions is not satisfied, &nbsp; <u>'''nonlinear'''</u>&nbsp; distortions arise,&nbsp; not linear ones &nbsp; &rArr; &nbsp; Answer 3 is wrong.  
  
 
{{ML-Fuß}}
 
{{ML-Fuß}}
Line 88: Line 113:
  
  
[[Category:Aufgaben zu Modulationsverfahren|^2.3 Hüllkurvendemodulation^]]
+
[[Category:Modulation Methods: Exercises|^2.3 Envelope Demodulation^]]

Latest revision as of 16:19, 18 January 2023

Spectrum  $R_{\rm TP}(f)$  of the received signal in the equivalent low-pass range

Assume a source signal

$$ q(t) = 2 \,{\rm V} \cdot \cos(2 \pi \cdot 2\,{\rm kHz} \cdot t ) + 2 \,{\rm V} \cdot \sin(2 \pi \cdot 5\,{\rm kHz} \cdot t )\hspace{0.05cm}.$$

This is modulated according to the modulation method  "DSB-AM with carrier"  and transmitted through an ideal channel.  The influence of noise can be disregarded.


The graph shows the spectrum  $R_{\rm TP}(f)$  of the received signal in the equivalent low-pass region,  which is composed of Dirac delta lines

  • at   $f = 0$  (originating from the carrier), 
  • at  $±2\ \rm kHz$  (originating from the cosine component)  and
  • at  $±5\ \rm kHz$  (originating from the sine component). 


The locus curve is the plot of the equivalent low-pass signal  $r_{\rm TP}(t)$  in the complex plane,  where  $r_{\rm TP}(t)$  is the Fourier retransform of  $R_{\ \rm TP}(f)$ .



Hints:


Questions

1

Estimate the maximum magnitude  $q_{\rm max} = {\rm Max} |q(t)|$  of the source signal.

$q_{\rm max} \ = \ $

$\ \rm V$

2

What is the amplitude  $A_{\rm T}$  of the carrier signal added at the transmitter?  What modulation depth  $m$  results from this?

$A_{\rm T} \ = \ $

$\ \rm V$
$m \ = \ $

3

Which of these are arguments for or against using an envelope demodulator?  Assume the alternative would be a synchronous demodulator.

With the envelope demodulator,  distortion-free demodulation is not possible in the example considered.
One can do demodulation without frequency and phase synchronization.
A smaller transmission power would be needed using a synchronous demodulator.

4

Calculate the equivalent low-pass signal  $r_{\rm TP}(t)$   ⇒   "locus curve",  using the Fourier retransform of  $R_{\rm TP}(f)$.  Which statements are true?

The locus curve  $r_{\rm TP}(t)$  is composed of five pointers.
The carrier rotates with a rotation speed  $ω_{\rm T}$.
The rotational pointers of the negative frequencies rotate clockwise.
The pointer for  $2 \ \rm kHz$  rotates twice as fast as the one for  $5 \ \rm kHz$.

5

Which statements can be made based on the locus curve?  Answer the following questions by considering the application of envelope demodulation.

A distortionless demodulation is only possible when  $r_{\rm TP}(t)$  is real at all times.
A distortionless demodulation is only possible when  $r_{\rm TP}(t)$  does not become negative at any point in time.
If the first two conditions mentioned are not met,  linear distortions will occur.


Solution

Source signal in the region up to  $1\text{ ms}$

(1)  The graph shows that the source signal can take on all values between   $–4 \ \rm V$  and  $+3.667\ \rm V$. 

  • For example,  the maximum magnitude occurs at time   $t = t_0 =0.75\ \rm ms$:
$$q(t = t_0) = 2 \,{\rm V} \cdot \cos(2 \pi \cdot 2\,{\rm kHz} \cdot t_0 ) + 2 \,{\rm V} \cdot \sin(2 \pi \cdot 5\,{\rm kHz} \cdot t_0 )$$
$$\Rightarrow \hspace{0.3cm}q(t = 0.75 \,{\rm ms}) = 2 \,{\rm V} \cdot \cos(3 \pi) + 2 \,{\rm V} \cdot \sin(7.5 \pi)= -4 \,{\rm V}\hspace{0.05cm}.$$
  • From this,  it follows for the maximum magnitude:   $q_{\rm max}\hspace{0.15cm}\underline{ = 4 \ \rm V}$.


(2)  In the graph on the information page,  the weight of the Dirac delta line at  $f = 0$  indicates the amplitude of the added carrier.  This is  $A_{\rm T}\hspace{0.15cm}\underline{ = 4\ \rm V }$.

  • From this,  we get the modulation depth  $m = q_{\rm max}/A_{\rm T} \hspace{0.15cm}\underline{ = 1}$.


(3) Answers 2 and 3  are correct:

  • Since the modulation depth is not greater than  $m = 1$,  the envelope demodulator does not cause distortion either.
  • The main advantage of envelope demodulation is that no frequency and phase synchronization is necessary.
  • A disadvantage is that a significantly higher power must be applied at the transmitter relative to synchronous demodulation.
  • When  $m = 1$,  this results in three times the transmit power compared to DSB-AM without a carrier.


Equivalent low-pass signal
in the complex plane

(4)  Answers 1 and 3  are correct:  When  $ω_2 = 2 π · 2 \ \rm kHz$  and  $ω_5 = 2 π · \ \rm 5 kHz$:

$$ r_{\rm TP}(t) = 4 \,{\rm V} \hspace{-0.05cm}+\hspace{-0.05cm} 1 \,{\rm V} \cdot {\rm e}^{{\rm j} \cdot \hspace{0.03cm}\omega_{\rm 2}\cdot \hspace{0.03cm}t} \hspace{-0.05cm}+\hspace{-0.05cm} 1 \,{\rm V} \cdot {\rm e}^{-{\rm j} \cdot \hspace{0.03cm}\omega_{\rm 2}\cdot \hspace{0.03cm}t} \hspace{-0.05cm}-\hspace{-0.05cm} \hspace{0.15cm}{\rm j} \cdot1 \,{\rm V} \cdot {\rm e}^{{\rm j} \cdot \hspace{0.03cm}\omega_{\rm 5}\cdot \hspace{0.03cm}t} \hspace{-0.05cm}+\hspace{-0.05cm} {\rm j} \cdot1 \,{\rm V} \cdot {\rm e}^{-{\rm j} \cdot \hspace{0.03cm}\omega_{\rm 5}\cdot \hspace{0.03cm}t} \hspace{0.05cm}. \hspace{0.1cm}$$

Thus,  in constructing the locus   $r_{TP}(t)$,  there are exactly five pointers to consider   ⇒   answer 1 is correct.  The graph shows a snapshot at time   $t = 0$.

  • The (red) carrier is given by the real pointer of length  $4 \ \rm V$ for all time points.  In contrast to the pointer diagram  (showing the analytic signal),  this does not rotate   ⇒   Answer 2 is false.
  • The third statement is similarly correct:  The rotating pointers at negative frequencies rotate in mathematically negative direction  ("clockwise")  in contrast to the two pointers with  $f > 0$.
  • The last statement is false.  The larger the frequency   $f$,  the faster the associated pointer rotates.


Locus curve for
distortionless envelope demodulation

(5)  Statements 1 and 2  are correct:

  • In the example considered,  the equivalent low-pass signal can be written as:
$$r_{\rm TP}(t) = q(t) + A_{\rm T} \hspace{0.05cm}.$$
  • Thus,  it is obvious that   $r_{\rm TP}(t)$  is always real. 
  • Moreover,  it follows from subtasks  (1)  and  (2)  that   $r_{\rm TP}(t) ≥ 0$.


This means:

  1. Here, the locus curve is a horizontal line on the real plane and always lies in the right half-plane.
  2. These are the two necessary conditions for an envelope demodulator to recover the signal without distortion.
  3. If one of these conditions is not satisfied,   nonlinear  distortions arise,  not linear ones   ⇒   Answer 3 is wrong.