Channel Coding/Distance Characteristics and Error Probability Bounds

1. Channel Coding
2. Convolutional Codes and Their Decoding
3. Distance Characteristics and Error Probability Bounds

• Previous page
• Next page

• Previous page
• Next page

Free distance vs. minimum distance

An important parameter regarding the error probability of linear block codes is the  "minimum distance"  between two code words   $\underline{x}$   and   $\underline{x}\hspace{0.05cm}'$:

\[d_{\rm min}(\mathcal{C}) = \min_{\substack{\underline{x},\hspace{0.05cm}\underline{x}\hspace{0.05cm}' \hspace{0.05cm}\in \hspace{0.05cm} \mathcal{C} \\ {\underline{x}} \hspace{0.05cm}\ne \hspace{0.05cm} \underline{x}\hspace{0.05cm}'}}\hspace{0.1cm}d_{\rm H}(\underline{x}, \hspace{0.05cm}\underline{x}\hspace{0.05cm}') = \min_{\substack{\underline{x} \hspace{0.05cm}\in \hspace{0.05cm} \mathcal{C} \\ {\underline{x}} \hspace{0.05cm}\ne \hspace{0.05cm} \underline{0}}}\hspace{0.1cm}w_{\rm H}(\underline{x}) \hspace{0.05cm}.\]

• The second part of the equation arises from the fact that every linear code also includes the zero word   ⇒   $(\underline{0})$.

• It is therefore convenient to set  $\underline{x}\hspace{0.05cm}' = \underline{0}$,  so that the  $\text{Hamming distance}$   $d_{\rm H}(\underline{x}, \ \underline{0})$   gives the same result as the Hamming weight   $w_{\rm H}(\underline{x})$.
  

$\text{Example 1:}$  The table shows the  $16$  code words of of an exemplary  $\text{HC (7, 4, 3)}$  $($see  $\text{Example 7})$.

Code words of the considered  $(7, 4, 3)$ Hamming code

You can see:

• All code words except the null word  $(\underline{0})$  contain at least three ones   ⇒   $d_{\rm min} = 3$.

• There are

1. seven code words with three  "ones"  $($highlighted in yellow$)$,
2. seven with four  "ones"  $($highlighted in green$)$,  and
3. one each with no  "ones" and seven  "ones".

The  free distance  $d_{\rm F}$  of a convolutional code  $(\mathcal{CC})$  is formulaically no different from the minimum distance of a linear block code:

\[d_{\rm F}(\mathcal{CC}) = \min_{\substack{\underline{x},\hspace{0.05cm}\underline{x}\hspace{0.05cm}' \hspace{0.05cm}\in \hspace{0.05cm} \mathcal{CC} \\ {\underline{x}} \hspace{0.05cm}\ne \hspace{0.05cm} \underline{x}\hspace{0.05cm}'}}\hspace{0.1cm}d_{\rm H}(\underline{x}, \hspace{0.05cm}\underline{x}\hspace{0.05cm}') = \min_{\substack{\underline{x} \hspace{0.05cm}\in \hspace{0.05cm} \mathcal{CC} \\ {\underline{x}} \hspace{0.05cm}\ne \hspace{0.05cm} \underline{0}}}\hspace{0.1cm}w_{\rm H}(\underline{x}) \hspace{0.05cm}.\]

Some paths wih  $w(\underline{x}) = d_{\rm F} = 5$

In the literature instead of  "$d_{\rm F}$"  sometimes is also used  "$d_{∞}$".

The graph shows three of the infinite paths with the minimum Hamming weight  $w_{\rm H, \ min}(\underline{x}) = d_{\rm F} = 5$.

• Major difference to the minimal distance  $d_{\rm min}$  of other codes is

1. that in convolutional codes not information words and code words are to be considered, 
2. but sequences with the property  »$\text{semi–infinite}$«. 

• Each encoded sequence  $\underline{x}$  describes a path through the trellis.

• The  "free distance"  is the smallest possible Hamming weight of such a path  $($except for the zero path$)$.
  

Path weighting enumerator function

For any linear block code,  a weight enumerator function can be given in a simple way because of the finite number of code words  $\underline{x}$. 

For the  $\text{Example 1}$  in the previous section this is:

\[W(X) = 1 + 7 \cdot X^{3} + 7 \cdot X^{4} + X^{7}\hspace{0.05cm}.\]

Some paths and their path weightings

In the case of a  $($non terminated$)$  convolutional code,  no such weight function can be given,  since there are infinitely many,  infinitely long encoded sequences  $\underline{x}$  and thus also infinitely many trellis paths.

To get a grip on this problem,  we now assume the following:

• As a reference for the trellis diagram,  we always choose the path of the code sequence  $\underline{x} = \underline{0}$  and call this the  "zero path"  $\varphi_0$.
  

• We now consider only paths   $\varphi_j ∈ {\it \Phi}$  that all deviate from the zero path at a given time  $t$  and return to it at some point later.
  

• Although only a fraction of all paths belong to the set  ${\it \Phi}$,  contains the remainder quantity  ${\it \Phi} = \{\varphi_1, \ \varphi_2, \ \varphi_3, \ \text{...} \}$  still an unbounded set of paths  $\varphi_0$  is not one of them.
  

In the above trellis some paths  $\varphi_j ∈ {\it \Phi}$  are drawn:

• The yellow path  $\varphi_1$  belongs to the sequence  $\underline{x}_1 = (11, 10, 11)$  with Hamming weight  $w_{\rm H}(\underline{x}_1) = 5$.  Thus,  the path weighting  $w(\varphi_1) = 5$.  Due to the definition of the branching time  $t$  only this single path  $\varphi_1$  has the free distance  $d_{\rm F} = 5$  to the zero path   ⇒   $A_5 = 1$.
  

• For the two green paths with corresponding sequences  $\underline{x}_2 = (11, 01, 01, 11)$  resp.   $\underline{x}_3 = (11, 10, 00, 10, 11)$   ⇒   $w(\varphi_2) = w(\varphi_3) = 6$.  No other path exhibits the path weighting  $6$.  We take this fact into account by the coefficient  $A_6 = 2$.
  

• Also drawn is the gray path  $\varphi_4$,  associated with the sequence  $\underline{x}_4 = (11, 01, 10, 01, 11)$   ⇒   $w(\varphi_4) = 7$.  Also,  the sequences  $\underline{x}_5 = (11, 01, 01, 00, 10, 11)$,  $\underline{x}_6 = (11, 10, 00, 01, 01, 11)$  and  $\underline{x}_7 = (11, 10, 00, 10, 00, 10, 11)$  have the same path weighting  "$7$"    ⇒   $A_7 = 4$.
  
  

Thus,  the path weighting enumerator function is for this example:

\[T(X) = A_5 \cdot X^5 + A_6 \cdot X^6 + A_7 \cdot X^7 + \text{...} \hspace{0.1cm}= X^5 + 2 \cdot X^6 + 4 \cdot X^7+ \text{...}\hspace{0.1cm} \hspace{0.05cm}.\]

The definition of this function  $T(X)$  follows.

$\text{Definition:}$  For the  »path weighting enumerator function«  of a convolutional code holds:

\[T(X) = \sum_{\varphi_j \in {\it \Phi} }\hspace{0.1cm} X^{w(\varphi_j) } \hspace{0.1cm}=\hspace{0.1cm} \sum_{w\hspace{0.05cm} =\hspace{0.05cm} d_{\rm F} }^{\infty}\hspace{0.1cm} A_w \cdot X^w \hspace{0.05cm}.\]

1.   ${\it \Phi}$  denotes the set of all paths that leave the zero path  $\varphi_0$  exactly at the specified time  $t$  and return to it  $($sometime$)$  later.
   
2.   According to the second equation part,  the summands are ordered by their path weightings  $w$  where  $A_w$  denotes the number of paths with weighting  $w$.
3.   The sum starts with  $w = d_{\rm F}$.
   
4.   The path weighting  $w(\varphi_j)$  is equal to the Hamming weight  $($number of  "ones"$)$  of the code sequence $\underline{x}_j$  associated to the path  $\varphi_j$:  $w({\varphi_j) = w_{\rm H}(\underline {x} }_j) \hspace{0.05cm}.$

Note:  The weight enumerator function  $W(X)$  defined for linear block codes and the path weight function  $T(X)$  of convolutional codes have many similarities;  however,  they are not identical.     We consider again

• the weight enumerator function of the  $(7, 4, 3)$ Hamming code:

\[W(X) = 1 + 7 \cdot X^{3} + 7 \cdot X^{4} + X^{7},\]

• and the path weighting enumerator function of our  "standard convolutional encoder":

\[T(X) = X^5 + 2 \cdot X^6 + 4 \cdot X^7+ 8 \cdot X^8+ \text{...} \]

1.   Noticeable is the  "$1$"  in the first equation,  which is missing in the second one.  That is:
2.   For the linear block codes,  the reference code word  $\underline{x}_i = \underline{0}$  is counted.
3.   But the zero code sequence  $\underline{x}_i = \underline{0}$  and the zero path  $\varphi_0$  are excluded by definition for convolutional codes.

$\text{Author's personal opinion:}$ 

One could  have defined  $W(X)$  without the  "$1$"  as well.  This would have avoided among other things,  that the Bhattacharyya–bound for linear block codes and that for convolutional codes differ by  "$-1$",  as can be seen from the following equations:

• Bhattacharyya bound for  $\text{linear block codes}$:           ${\rm Pr(block\:error)} \le W(X = \beta) -1 \hspace{0.05cm},$

• "Bhattacharyya bound for  $\text{convolutional codes}$:    ${\rm Pr(burst\:error)} \le T(X = \beta) \hspace{0.05cm}.$

Enhanced path weighting enumerator function

The path weighting enumerator function  $T(X)$  only provides information regarding the weights of the encoded sequence  $\underline{x}$.

• More information is obtained if the weights of the information sequence  $\underline{u}$  are also collected.

• One then needs two formal parameters  $X$  and  $U$,  as can be seen from the following definition.
  

$\text{Definition:}$  The  enhanced path weight enumerator function  $\rm (EPWEF)$  is:

\[T_{\rm enh}(X,\ U) = \sum_{\varphi_j \in {\it \Phi} }\hspace{0.1cm} X^{w(\varphi_j)} \cdot U^{ { u}(\varphi_j)} \hspace{0.1cm}=\hspace{0.1cm} \sum_{w} \sum_{u}\hspace{0.1cm} A_{w, \hspace{0.05cm}u} \cdot X^w \cdot U^{u} \hspace{0.05cm}.\]

All specifications for the   $T(X)$  definition in the last section apply.  In addition,  note:

1.   The path input weight  $u(\varphi_j)$  is equal to the Hamming weight of the information sequence  $\underline{u}_j$  associated to the path.
2.   It is expressed as a power of the formal parameter  $U$ .
   
3.   $A_{w, \ u}$  denotes the number of paths  $\varphi_j$  with path output weight  $w(\varphi_j)$  and path input weight  $u(\varphi_j)$.  Control variable for the second portion is  $u$.
   
4.   Setting the formal parameter  $U = 1$  in the enhanced path weighting enumerator function yields the original weighting enumerator function  $T(X)$.
   

For many  $($and all relevant$)$  convolutional codes,  upper equation can still be simplified:

\[T_{\rm enh}(X,\ U) =\hspace{0.1cm} \sum_{w \ = \ d_{\rm F} }^{\infty}\hspace{0.1cm} A_w \cdot X^w \cdot U^{u} \hspace{0.05cm}.\]

$\text{Example 2:}$  Thus, the enhanced path weighting enumerator function of our standard coder is:

\[T_{\rm enh}(X,\ U) = U \cdot X^5 + 2 \cdot U^2 \cdot X^6 + 4 \cdot U^3 \cdot X^7+ \text{ ...} \hspace{0.1cm} \hspace{0.05cm}.\]

Some paths and their path weightings

Comparing this result with the trellis shown below, we can see:

• The yellow highlighted path  – in  $T(X)$  marked by  $X^5$  – is composed of a blue arrow  $(u_i = 1)$  and two red arrows  $(u_i = 0)$.  Thus  $X^5$  becomes the extended term  $U X^5$.
  

• The sequences of the two green paths are 

$$\underline{u}_2 = (1, 1, 0, 0) \hspace{0.15cm} ⇒ \hspace{0.15cm} \underline{x}_2 = (11, 01, 01, 11),$$

$$\underline{u}_3 = (1, 0, 1, 0, 0) \hspace{0.15cm} ⇒ \hspace{0.15cm} \underline{x}_3 = (11, 10, 00, 10, 11).$$

This gives the second term  $2 \cdot U^2X^6$.

• The gray path  $($and the three undrawn paths$)$  together make the contribution  $4 \cdot U^3X^7$.  Each of these paths contains three blue arrows   ⇒   three  "ones"  in the associated information sequence.
  

Path weighting enumerator function from state transition diagram

There is an elegant way to determine the path weighting enumerator function  $T(X)$  and its enhancement directly from the state transition diagram. This will be demonstrated here and in the following sections using our  "Standard encoder"  as an example.

First, the state transition diagram must be redrawn for this purpose. The graphic shows this on the left in the previous form as diagram  $\rm (A)$, while the new diagram  $\rm (B)$  is given on the right.

State transition diagram in two different variants

It can be seen:

• The state  $S_0$  is split into the start state  $S_0$  and the end state  $S_0\hspace{0.01cm}'$. Thus, all paths of the trellis diagram that start in state  $S_0$  and return to it at some point can also be traced in the right graph  $\rm (B)$ . Excluded, on the other hand, are direct transitions from  $S_0$  to  $S_0\hspace{0.01cm}'$  and thus also the zero path  $($duration–$S_0)$.
  

• In the diagram  $\rm (A)$  the transitions are distinguishable by the colors red  $($for  $u_i = 0)$  and blue  $($for  $u_i = 1)$  and the code words  $\underline{x}_i ∈ \{00, 01, 10, 11\}$  are noted at the transitions. In the new diagram  $\rm (B)$  are expressed  $(00)$  by  $X^0 = 1$  and  $(11)$  by  $X^2$ . The code words  $(01)$  and  $(10)$  are now indistinguishable, but are uniformly denoted by  $X$ .
  

• Phrased another way:   The code word  $\underline{x}_i$  is now represented as  $X^w$  where  $X$  is a dummy variable associated with the output (the code sequence); variable and  $w = w_{\rm H}(\underline{x}_i)$  indicates the hamming weight of the code word  $\underline{x}_i$ . For a rate $1/2$ code, the exponent  $w$  is either  $0, \ 1$  or  $2$.
  

• Also the diagram  $\rm (B)$  omits the color coding. The information bit  $u_i = 1$  is now denoted by  $U^1 = U$  and the information bit  $u_i = 0$  by  $U^0 = 1$ . The dummy–variable  $U$  is thus assigned to the input sequence  $\underline{u}$ .
  
  

Rules for manipulating the state transition diagram

The goal of our calculations will be to characterize the (arbitrarily complicated) path from  $S_0$  to  $S_0\hspace{0.01cm}'$  by the extended path weighting enumerator function  $T_{\rm enh}(X, \ U)$  . For this we need rules to simplify the graph stepwise.

Detection of serial transitions

Serial transitions

Two serial connections – denoted by  $A(X, \ U)$  and  $B(X, \ U)$  – can be replaced by a single connection with the product of these ratings.

Detection of parallel transitions

Parallel transitions

Two parallel connections – denoted by  $A(X, \ U)$  and  $B(X, \ U)$  – are combined by the sum of their valuation functions.

Reduction of a ring

Ring

The adjacent constellation can be replaced by a single connection, and the following applies to the replacement:

\[E(X, U) = \frac{A(X, U) \cdot B(X, U)}{1- C(X, U)} \hspace{0.05cm}.\]

[[File:P ID2692 KC T 3 5 S3b4.png|right|frame|Reduction of feedback] Feedback

Due to the feedback, two states can alternate here as often as desired. For this constellation applies:

\[F(X, U) = \frac{A(X, U) \cdot B(X, U)\cdot C(X, U)}{1- C(X, U)\cdot D(X, U)} \hspace{0.05cm}.\]

The equations for ring and feedback given here are to be proved in the  "Exercise 3.12Z" .

$\text{Example 3:}$  The above rules are now to be applied to our standard example. In the graphic on the left you can see the modified diagram $\rm (B)$.

Reduction of state transitions

• First we replace the red highlighted detour from  $S_1$  to  $S_2$  via  $S_3$  in the diagram  $\rm (B)$  by the red connection drawn in the diagram  $\rm (C)$  $T_1(X, \hspace{0.05cm} U)$. According to the upper classification, it is a "ring" with the labels  $A = C = U \cdot X$  and  $B = X$, and we obtain for the first reduction function:

\[T_1(X, \hspace{0.05cm} U) = \frac{U \cdot X^2}{1- U \cdot X} \hspace{0.05cm}.\]

• Now we summarize the parallel connections according to the blue background in the diagram  $\rm (C)$  and replace it with the blue connection in the diagram  $\rm (D)$. The second reduction function is thus:

\[T_2(X, \hspace{0.05cm}U) = T_1(X, \hspace{0.05cm}U) + X = \frac{U X^2 + X \cdot (1-UX)}{1- U X} = \frac{X}{1- U X} \hspace{0.05cm}.\]

• The entire graph  $\rm (D)$  can then be replaced by a single connection from  $S_0$  to  $S_0\hspace{0.01cm}'$ . According to the feedback rule, one obtains for the  enhanced path weighting enumerator function:

\[T_{\rm enh}(X, \hspace{0.05cm}U) = \frac{(U X^2) \cdot X^2 \cdot \frac{X}{1- U X} }{1- U \cdot \frac{X}{1- U X} } = \frac{U X^5}{1- U X- U X} = \frac{U X^5}{1- 2 \cdot U X} \hspace{0.05cm}.\]

• With the series expansion  $1/(1 \, –x) = 1 + x + x^2 + x^3 + \ \text{...} \ $  can also be written for this purpose:

\[T_{\rm enh}(X, \hspace{0.05cm}U) = U X^5 \cdot \big [ 1 + 2 \hspace{0.05cm}UX + (2 \hspace{0.05cm}UX)^2 + (2 \hspace{0.05cm}UX)^3 + \text{...} \hspace{0.05cm} \big ] \hspace{0.05cm}.\]

• Setting the formal input variable  $U = 1$, we obtain the "simple" path weighting enumerator function, which alone allows statements about the weighting distribution of the output sequence  $\underline{x}$ :

\[T(X) = X^5 \cdot \big [ 1 + 2 X + 4 X^2 + 8 X^3 +\text{...}\hspace{0.05cm} \big ] \hspace{0.05cm}.\]

We have already read the same result from the trellis diagram in section  "Path weighting enumerator function" . There was one gray path with weight  $5$, two yellow paths with weighting  $6$  and four green paths with weighting  $7$.

Block error probability vs. burst error probability

Simple transmission model including encoding/decoding

The simple model according to the sketch is valid for linear block codes as well as for convolutional codes.

Block codes

For block codes denote  $\underline{u} = (u_1, \ \text{...} \hspace{0.05cm}, \ u_i, \ \text{...} \hspace{0.05cm}, \ u_k)$  and  $\underline{v} = (v_1, \ \text{...} \hspace{0.05cm}, v_i, \ \text{...} \hspace{0.05cm} \ , \ v_k)$  the information blocks at the input and output of the system.

Thus, the following descriptive variables can be specified:

• the block error probability   ${\rm Pr(Block\:error)} = {\rm Pr}(\underline{v} ≠ \underline{u}),$

• the bit error probability   ${\rm Pr(Bit\:error)} = {\rm Pr}(v_i ≠ u_i).$
  
  

$\text{Please note:}$  In real transmission systems, due to thermal noise, the following always applies:

$${\rm Pr(Bit\:error)} > 0\hspace{0.05cm},\hspace{1.0cm}{\rm Pr(Block\:error)} > {\rm Pr(Bit\:error)} \hspace{0.05cm}.$$

For this a simple explanation attempt:   If the decoder decides in each block of length  $k$  exactly one bit wrong,

• so the average bit error probability  ${\rm Pr(Bit\:error)}= 1/k$,
• while for the block error probability  ${\rm Pr(Block\:error)}\equiv 1$  holds

Convolutional codes

For convolutional codes, the block error probability cannot be specified, since here  $\underline{u} = (u_1, \ u_2, \ \text{...} \hspace{0.05cm})$  and  $\underline{\upsilon} = (v_1, \ v_2, \ \text{...} \hspace{0.05cm})$  represent sequences.

Even the smallest possible code parameter  $k = 1$  here leads to the sequence length  $k \hspace{0.05cm}' → ∞$, and the block error probability would always result in  ${\rm Pr(block error)}\equiv 1$, even if the bit error probability is extremely small (but non-zero).

Zero path  ${\it \varphi}_0$  and deviation paths  ${\it \varphi}_i$

$\text{Definition:}$  For the  burst error probability  of a convolutional code holds:

\[{\rm Pr(Burst\:error)} = {\rm Pr}\big \{ {\rm Decoder\hspace{0.15cm} leaves\hspace{0.15cm} the\hspace{0.15cm} correct\hspace{0.15cm}path}\hspace{0.15cm}{\rm at\hspace{0.15cm}time \hspace{0.15cm}t}\big \} \hspace{0.05cm}.\]

• To simplify notation for the following derivation, we always assume the zero sequence  $(\underline{0})$  which is shown in red in the drawn trellis as the zero path  $\varphi_0$ .
• All other paths  $\varphi_1, \ \varphi_2, \ \varphi_3, \ \text{...} $  (and many more) leave  $\varphi_0$  at time  $t$. They all belong to the path set  ${\it \Phi}$  ⇒   "Viterbi decoder leaves the correct path at time  $t$". This probability is calculated in the next section

.

Burst error probability and Bhattacharyya bound

We proceed as in the earlier chapter  "Bounds for block error probability"  from the pairwise error probability  ${\rm Pr}\big [\varphi_0 → \varphi_i \big]$  that instead of the path  $\varphi_0$  the decoder could select the path  $\varphi_i$ . All considered paths  $\varphi_i$  leave the zero path  $\varphi_0$  at time  $t$; thus they all belong to the path set  ${\it \Phi}$.

Calculation of the burst error probability

The sought  burst error probability  is equal to the following union set:

\[{\rm Pr(Burst\:error)}= {\rm Pr}\left (\big[\varphi_{\hspace{0.02cm}0} \mapsto \varphi_{\hspace{0.02cm}1}\big] \hspace{0.05cm}\cup\hspace{0.05cm}\big[\varphi_{\hspace{0.02cm}0} \mapsto \varphi_{\hspace{0.02cm}2}\big]\hspace{0.05cm}\cup\hspace{0.05cm} \text{... }\hspace{0.05cm} \right )= {\rm Pr} \left ( \cup_{\varphi_{\hspace{0.02cm}i} \in {\it \Phi}} \hspace{0.15cm} \big[\varphi_{\hspace{0.02cm}0} \mapsto \varphi_{\hspace{0.02cm}i}\big] \right )\hspace{0.05cm}.\]

An upper bound for this is provided by the so-called  "Union bound":

\[{\rm Pr(Burst\:error)} \le \sum_{\varphi_{\hspace{0.02cm}i} \in {\it \Phi}}\hspace{0.15cm} {\rm Pr}\big [\varphi_{\hspace{0.02cm}0} \mapsto \varphi_{\hspace{0.02cm}i}\big ] = {\rm Pr(Union \hspace{0.15cm}Bound)} \hspace{0.05cm}.\]

The pairwise error probability can be estimated using the  "Bhattacharyya bound" :

\[{\rm Pr}\big [\underline {0} \mapsto \underline {x}_{\hspace{0.02cm}i}\big ] \le \beta^{w_{\rm H}({x}_{\hspace{0.02cm}i})}\hspace{0.3cm}\Rightarrow \hspace{0.3cm} {\rm Pr}\left [\varphi_{\hspace{0.02cm}0} \mapsto \varphi_{\hspace{0.02cm}i}\right ] \le \hspace{0.05cm} \beta^{w(\varphi_i)}\hspace{0.05cm}.\]

Here denotes

• $w_{\rm H}(\underline{x}_i)$  the Hamming weight of the possible code sequence  $\underline{x}_i,$
• $\ w(\varphi_i)$  the path weight of the corresponding path  $\varphi_i ∈ {\it \Phi}$, and.
• $\beta$  the so-called  "Bhattacharyya channel parameter".
  

By summing over all paths and comparing with the (simple)  "path weighting function"  $T(X)$  we get the result:

\[{\rm Pr(Burst\:error)} \le T(X = \beta),\hspace{0.5cm}{\rm mit}\hspace{0.5cm} T(X) = \sum_{\varphi_{\hspace{0.02cm}i} \in {\it \Phi}}\hspace{0.15cm} \hspace{0.05cm} X^{w(\varphi_i)}\hspace{0.05cm}.\]

$\text{Example 4: }$  For our standard encoder   ⇒   $R = 1/2, \ m = 2, \ \mathbf{G}(D) = (1 + D + D^2, \ 1 + D)$  we have the following  "path weighting enumerator function"  obtained:

\[T(X) = X^5 + 2 \cdot X^6 + 4 \cdot X^7 + \ \text{...} \hspace{0.1cm} = X^5 \cdot ( 1 + 2 \cdot X + 4 \cdot X^2+ \ \text{...} \hspace{0.1cm}) \hspace{0.05cm}.\]

Using the series expansion  $1/(1 \, –x) = 1 + x + x^2 + x^3 + \ \text{...} \hspace{0.15cm} $  can also be written for this purpose:

\[T(X) = \frac{X^5}{1-2 \cdot X} \hspace{0.05cm}.\]

The BSC model provides the following Bhattacharyya bound with the corruption probability  $\varepsilon$ :

\[{\rm Pr(Burst\:error)} \le T(X = \beta) = T\big ( X = 2 \cdot \sqrt{\varepsilon \cdot (1-\varepsilon)} \big ) = \frac{(2 \cdot \sqrt{\varepsilon \cdot (1-\varepsilon)})^5}{1- 4\cdot \sqrt{\varepsilon \cdot (1-\varepsilon)}}\hspace{0.05cm}.\]

In the  "Exercise 3.14"  this equation is to be evaluated numerically.

Bit error probability and Viterbi bound

Finally, an upper bound is given for the bit error probability. According to the graph, we proceed as in  [Liv10]  assume the following conditions:

• Sent the zero sequence  $\underline{x}$ = $\underline{0}$   ⇒   Path  $\varphi_0$.
  

• The duration of a path deviation (error burst duration) is denoted by  $L$ .
  

• The distance between two bursts (inter burst time) we call  $N$.
  

• The hamming weight of the error bundle be  $H$.
  

For the definition of the description variables  $L$,  $N$  and $H$

For a rate–$1/n$–convolutional code   ⇒   $k = 1$, i.e., one information bit per clock, the expected values  ${\rm E}\big[L \big]$, ${\rm E}\big[N \big]$  and  ${\rm E}\big[H\big]$  of the random variables defined above to give an upper bound for the bit error probability:

\[{\rm Pr(Bit\:error)} = \frac{{\rm E}\big[H\big]}{{\rm E}[L] + {\rm E}\big[N\big]}\hspace{0.15cm} \le \hspace{0.15cm} \frac{{\rm E}\big[H\big]}{{\rm E}\big[N\big]} \hspace{0.05cm}.\]

It is assumed that

• the (mean) duration of a fault burst is in practice much smaller than the expected distance between two bursts,
• the (mean) inter burst time $E\big[N\big]$  is equal to the inverse of the burst fault probability,
• the expected value in the numerator is estimated as follows:

\[{\rm E}\big[H \big] \le \frac{1}{\rm Pr(Burst\:error)}\hspace{0.1cm} \cdot \sum_{\varphi_{\hspace{0.02cm}i} \in {\it \Phi}}\hspace{0.05cm} \hspace{0.05cm} u(\varphi_i) \cdot \beta^{w(\varphi_i)} \hspace{0.05cm}.\]

In deriving this bound, the pairwise error probability  ${\rm Pr}\big [\varphi_0 → \varphi_i \big]$  and the Bhattacharyya estimation are used. Thus one obtains with

• the path input weighting  $u(\varphi_i),$
• the path exit weighting  $w(\varphi_i),$ and
• the Bhattacharyya parameter  $\beta$

we obtain the following estimate for the bit error probability and refer to it as the  Viterbi bound:

\[{\rm Pr(Bit\:error)}\le \sum_{\varphi_{\hspace{0.02cm}i} \in {\it \Phi}}\hspace{0.05cm} \hspace{0.05cm} u(\varphi_i) \cdot \beta^{w(\varphi_i)} \hspace{0.05cm}.\]

This intermediate result can also be represented in another form. We recall the  "enhanced path weighting enumerator function"

\[T_{\rm enh}(X, U) = \sum_{\varphi_j \in {\it \Phi}}\hspace{0.1cm} X^{w(\varphi_j)} \cdot U^{{ u}(\varphi_j)} \hspace{0.05cm}.\]

If we derive this function according to the dummy input variable  $U$ , we get

\[\frac {\rm d}{{\rm d}U}\hspace{0.2cm}T_{\rm enh}(X, U) = \sum_{\varphi_j \in {\it \Phi}}\hspace{0.1cm} { u}(\varphi_j) \cdot X^{w(\varphi_j)} \cdot U^{{ u}(\varphi_j)-1} \hspace{0.05cm}.\]

Finally, if we set $U = 1$ for the dummy–input variable  we see the connection to the above result:

\[\left [ \frac {\rm d}{{\rm d}U}\hspace{0.2cm}T_{\rm enh}(X, U) \right ]_{\substack{ U=1}} = \sum_{\varphi_j \in {\it \Phi}}\hspace{0.1cm} { u}(\varphi_j) \cdot X^{w(\varphi_j)} \hspace{0.05cm}.\]

$\text{Conclusion:}$  The  bit error probability  of a convolutional code can be estimated using the extended path weighting enumerator function in closed form:

\[{\rm Pr(Bit\:error)} \le {\rm Pr(Viterbi)} = \left [ \frac {\rm d}{ {\rm d}U}\hspace{0.2cm}T_{\rm enh}(X, U) \right ]_{\substack{X=\beta \\ U=1} } \hspace{0.05cm}.\]

One speaks of the  Viterbi bound. Here one derives the enhanced path weighting enumerator function after the second parameter  $U$  and then sets 

• $X = \beta$, 
• $U = 1$.

Note:   In  "Exercise 3.14"  the  Viterbi bound  and the  Bhattacharyya bound  for the rate $1/2$ default code and the  "BSC–Model"  evaluated numerically.

AWGN bit error probability of convolutional codes

$\text{Example 5:}$  The graph illustrates the good correction capability of the convolutional codes at  "AWGN channel".

• Red circles denote the bit error rate for our rate $1/2$ default code with memory  $m = 2$.
  
• Green crosses mark a convolutional code with  $m = 6$, the so-called  "industry standard code".
  
  

In particular, codes with large memory  $m$  lead to large gains over uncoded transmission (dashed curve).

Exercises for the chapter

"Exercise 3.12: Path Weighting Function"

"Exercise 3.12Z: Ring and Feedback"

"Exercise 3.13: Path Weighting Function again"

"Exercise 3.14: Error Probability Bounds"