Entropy Coding According to Huffman

From LNTwww

The Huffman algorithm


We now assume that the source symbols  $q_\nu$  originate from an alphabet  $\{q_μ\} = \{$ $\rm A$,  $\rm B$ ,  $\rm C$ , ...$\}$  with the symbol range  $M$  and are statistically independent of each other.  For example, for the symbol range  $M = 8$:

$$\{ \hspace{0.05cm}q_{\mu} \} = \{ \boldsymbol{\rm A} \hspace{0.05cm},\hspace{0.05cm} \boldsymbol{\rm B}\hspace{0.05cm},\hspace{0.05cm} \boldsymbol{\rm C}\hspace{0.05cm},\hspace{0.05cm} \boldsymbol{\rm D}\hspace{0.05cm},\hspace{0.05cm} \boldsymbol{\rm E}\hspace{0.05cm},\hspace{0.05cm} \boldsymbol{\rm F}\hspace{0.05cm},\hspace{0.05cm} \boldsymbol{\rm G}\hspace{0.05cm},\hspace{0.05cm} \boldsymbol{\rm H}\hspace{0.05cm} \}\hspace{0.05cm}.$$
In 1952 - i.e. shortly after Shannon's groundbreaking publications David A. Huffman  gave an algorithm for the construction of optimal prefix-free codes.

This  Huffman Algorithm  is to be given here without derivation and proof, whereby we restrict ourselves to binary codes.  That is:   for the code symbols, let  $c_ν ∈ \{$01$\}$ always hold.

Here is the „recipe”:

  1.   Order the symbols according to decreasing probabilities of occurrence.
  2.   Combine the two most improbable symbols into a new symbol.
  3.   Repeat  (1)  and  (2), until only two (combined) symbols remain.
  4.   Code the more probable set of symbols with  1  and the other set with  0.
  5.   In the opposite direction  (i.e. from bottom to top) , add  1  or  0 to the respective binary codes of the split subsets according to the probabilities.


$\text{Example 1:}$  Without limiting the generality, we assume that the  $M = 6$ symbols  $\rm A$, ... , $\rm F$  are already ordered according to their probabilities:

$$p_{\rm A} = 0.30 \hspace{0.05cm},\hspace{0.2cm}p_{\rm B} = 0.24 \hspace{0.05cm},\hspace{0.2cm}p_{\rm C} = 0.20 \hspace{0.05cm},\hspace{0.2cm} p_{\rm D} = 0.12 \hspace{0.05cm},\hspace{0.2cm}p_{\rm E} = 0.10 \hspace{0.05cm},\hspace{0.2cm}p_{\rm F} = 0.04 \hspace{0.05cm}.$$

By pairwise combination and subsequent sorting, the following symbol combinations are obtained in five steps
(resulting probabilities in brackets):

1.   $\rm A$  (0.30), $\rm B$  (0.24), $\rm C$  (0.20), $\rm EF$  (0.14), $\rm D$  (0.12),
2.   $\rm A$  (0.30), $\rm EFD$  (0.26), $\rm B$  (0.24), $\rm C$  (0.20),
3.   $\rm BC$  (0.44), $\rm A$  (0.30), $\rm EFD$  (0.26),
4.   $\rm AEFD$  (0.56), $\rm BC$  (0.44),
5.   Root  $\rm AEFDBC$  (1.00).

Backwards – i.e. according to steps  (5)  to  (1)  – the assignment to binary symbols then takes place.  
An  x  indicates that bits still have to be added in the next steps:

5.   $\rm AEFD$   →   1x,     $\rm BC$   →   0x,
4.   $\underline{\rm A}$   →   11,     $\rm EFD$   →   10x,
3.   $\underline{\rm B}$   →   01,     $\underline{\rm C}$   →   00,
2.   $\rm EF$   →   101x,     $\underline{\rm D}$   →   100,
1.   $\underline{\rm E}$   →   1011,     $\underline{\rm F}$   →   1010.

The underlines mark the final binary coding..


On the term „entropy coding”


We continue to assume the probabilities and assignments of the last example:

$$p_{\rm A} = 0.30 \hspace{0.05cm},\hspace{0.2cm}p_{\rm B} = 0.24 \hspace{0.05cm},\hspace{0.2cm}p_{\rm C} = 0.20 \hspace{0.05cm},\hspace{0.2cm} p_{\rm D} = 0.12 \hspace{0.05cm},\hspace{0.2cm}p_{\rm E} = 0.10 \hspace{0.05cm},\hspace{0.2cm}p_{\rm F} = 0.04 \hspace{0.05cm};$$
$$\boldsymbol{\rm A} \hspace{0.05cm} \rightarrow \hspace{0.05cm} \boldsymbol{\rm 11} \hspace{0.05cm},\hspace{0.2cm} \boldsymbol{\rm B} \hspace{0.05cm} \rightarrow \hspace{0.05cm} \boldsymbol{\rm 01} \hspace{0.05cm},\hspace{0.2cm} \boldsymbol{\rm C} \hspace{0.05cm} \rightarrow \hspace{0.05cm} \boldsymbol{\rm 00} \hspace{0.05cm},\hspace{0.2cm} \boldsymbol{\rm D} \hspace{0.05cm} \rightarrow \hspace{0.05cm} \boldsymbol{\rm 100} \hspace{0.05cm},\hspace{0.2cm} \boldsymbol{\rm E} \hspace{0.05cm} \rightarrow \hspace{0.05cm} \boldsymbol{\rm 1011} \hspace{0.05cm},\hspace{0.2cm} \boldsymbol{\rm F} \hspace{0.05cm} \rightarrow \hspace{0.05cm} \boldsymbol{\rm 1010} \hspace{0.05cm}.$$

Thus, of the six source symbols, three are coded with two bits each, one with three bits and two symbols  $(\rm E$  and  $\rm F)$  with four bits each.

The average codeword length thus results in

$$L_{\rm M} = (0.30 \hspace{-0.05cm}+ \hspace{-0.05cm}0.24 \hspace{-0.05cm}+ \hspace{-0.05cm} 0.20) \cdot 2 + 0.12 \cdot 3 + (0.10 \hspace{-0.05cm}+ \hspace{-0.05cm} 0.04 ) \cdot 4 = 2.4 \,{\rm bit/source symbol} \hspace{0.05cm}.$$

From the comparison with the source entropy  $H = 2.365 \ \rm bit/source symbol$  bit/source symbol one can see the efficiency of the Huffman coding.

$\text{Merke:}$  Note: There is no prefix-free  $($⇒   immediately decodable$)$  code that leads to a smaller mean codeword length  $L_{\rm M}$  than the Huffman code by exploiting the occurrence probabilities alone. .  In this sense, the Huffman code is optimal..


$\text{Example 2:}$  If the symbol probabilities were

$$p_{\rm A} = p_{\rm B} = p_{\rm C} = 1/4 \hspace{0.05cm},\hspace{0.2cm} p_{\rm D} = 1/8 \hspace{0.05cm},\hspace{0.2cm}p_{\rm E} = p_{\rm F} = 1/16 \hspace{0.05cm},$$

then the same would apply to the entropy and to the mean codeword length:

$$H = 3 \cdot 1/4 \cdot {\rm log_2}\hspace{0.1cm}(4) + 1/8 \cdot {\rm log_2}\hspace{0.1cm}(8) + 2 \cdot 1/16 \cdot {\rm log_2}\hspace{0.1cm}(16) = 2.375 \,{\rm bit/source symbol}\hspace{0.05cm},$$
$$L_{\rm M} = 3 \cdot 1/4 \cdot 2 + 1/8 \cdot 3 + 2 \cdot 1/16 \cdot 4 = 2.375 \,{\rm bit/source symbol} \hspace{0.05cm}.$$


This property  $L_{\rm M} = H +\varepsilon$  with  $\varepsilon \to 0$  at suitable occurrence probabilities explains the term   entropy coding:

In this form of source coding, one tries to adapt the length  $L_μ$  of the binary sequence  (consisting of zeros and ones)  for the symbol  $q_μ$  according to the entropy calculation to its occurrence probability  $p_μ$  as follows:

$$L_{\mu} = {\rm log}_2\hspace{0.1cm}(1/p_{\mu} ) \hspace{0.05cm}.$$

Of course, this does not always succeed, but only if all occurrence probabilities  $p_μ$  can be represented in the form  $2^{–k}$  with  $k = 1, \ 2, \ 3,$ ...

  • In this special case - and only in this case - the mean codeword length  $L_{\rm M}$  coincides exactly with the source entropy  $H$    $(\varepsilon = 0$,  see $\text{example 2})$.
  • According to the  source encoding theorem  there is no (decodable) code that gets by with fewer binary characters per source symbol on average.


Representation of the Huffman code as a tree diagram


tree structure  is often used to construct the Huffman code.  For the example considered so far, this is shown in the following diagram:


Tree representation of the Huffman coding for  $\text{example 1}$

It can be seen:

  • At each step of the Huffman algorithm, the two branches with the smallest respective probabilities are combined.
  • The node in the first step combines the two symbols  $\rm E$  and  $\rm F$  with the currently smallest probabilities. This new node is labelled.  This new node is labelled  $p_{\rm E} + p_{\rm F} = 0.14$  .
  • The branch running from the symbol with the smaller probability  $($here  $\rm F)$  to the sum node is drawn in blue, the other branch  $($for $\rm E)$  in red.


After five steps, we arrive at the root of the tree with the total probability of  $1.00$ .  If you now trace the course from the root  (in the above graphic with yellow filling)  back to the individual symbols, you can read off the symbol assignment from the colours of the individual branches.

With the assignments „red”   →   1 and „blue”   →   0 for example, the following results from the root to the symbol

  • $\rm A$:   red, red   →   11,
  • $\rm B$:   blue, red   →   01,
  • $\rm C$:   blue, blue   →   00,
  • $\rm D$:   red, blue, blue   →   100,
  • $\rm E$:   red, blue, red, red   →   1011,
  • $\rm F$:   red, blue, red, blue   →   1010.


The (uniform) assignment „red”   →   0 and „blue”   →   1 would also lead to an optimal prefix-free Huffman code.

$\text{Example 3:}$  The following graph shows the Huffman coding of  $49$  symbols  $q_ν ∈ \{$ $\rm A$,  $\rm B$,  $\rm C$,  $\rm D$,  $\rm E$,  $\rm F$ $\}$ with the assignment derived on the last page.

Example sequences for Huffman coding
  • The binary code symbol sequence has the mean code word length  $L_{\rm M} = 125/49 = 2.551$  auf. 
  • The different colours serve only for better orientation.


Due to the short source symbol sequence  $(N = 49)$ , the occurrence frequencies  $h_{\rm A}$, ... ,  $h_{\rm F}$  of the simulated sequences (sometimes) deviate significantly from the given probabilities  $p_{\rm A}$, ... ,  $p_{\rm F}$ :

$$p_{\rm A} = 0.30 \hspace{0.05cm} \Rightarrow \hspace{0.05cm} h_{\rm A} = 16/49 \approx 0.326 \hspace{0.05cm},\hspace{0.4cm}p_{\rm B} = 0.24 \hspace{0.05cm} \Rightarrow \hspace{0.05cm} h_{\rm B} = 7/49 \approx 0.143 \hspace{0.05cm},$$
$$p_{\rm C} =0.24 \hspace{0.05cm} \Rightarrow \hspace{0.05cm} h_{\rm C}= 9/49 \approx 0.184 \hspace{0.05cm},\hspace{0.6cm}p_{\rm D} = 0.12 \hspace{0.05cm} \Rightarrow \hspace{0.05cm} h_{\rm D} = 7/49 \approx 0.143 \hspace{0.05cm},$$
$$p_{\rm E}=0.10 \hspace{0.05cm} \Rightarrow \hspace{0.05cm} h_{\rm E} = 5/49 \approx 0.102 \hspace{0.05cm},\hspace{0.6cm}p_{\rm F} = 0.04 \hspace{0.05cm} \Rightarrow \hspace{0.05cm} h_{\rm E} = 5/49 \approx 0.102 \hspace{0.05cm}.$$

This results in a slightly larger entropy value:

$$H ({\rm bez\ddot{u}glich }\hspace{0.15cm}p_{\mu}) = 2.365 \ {\rm bit/Quellensymbol}\hspace{0.3cm} \Rightarrow \hspace{0.3cm} H ({\rm bez\ddot{u}glich }\hspace{0.15cm}h_{\mu}) = 2.451 \ {\rm bit/Quellensymbol} \hspace{0.05cm}.$$

If one were to form the Huffman code with these „new” probabilities  $h_{\rm A}$, ... , $h_{\rm F}$  the following assignments would result:

     $\boldsymbol{\rm A} \hspace{0.05cm} \rightarrow \hspace{0.15cm}$11$\hspace{0.05cm},\hspace{0.2cm} \boldsymbol{\rm B} \hspace{0.05cm} \rightarrow \hspace{0.15cm}$100$\hspace{0.05cm},\hspace{0.2cm} \boldsymbol{\rm C} \hspace{0.05cm} \rightarrow \hspace{0.15cm}$00$\hspace{0.05cm},\hspace{0.2cm} \boldsymbol{\rm D} \hspace{0.05cm} \rightarrow \hspace{0.15cm}$101$\hspace{0.05cm},\hspace{0.2cm} \boldsymbol{\rm E} \hspace{0.05cm} \rightarrow \hspace{0.15cm}$010$\hspace{0.05cm},\hspace{0.2cm} \boldsymbol{\rm F} \hspace{0.05cm} \rightarrow \hspace{0.15cm}$011$\hspace{0.05cm}.$

Now only  $\rm A$  and  $\rm C$  would be represented by two bits, the other four symbols by three bits each.

  • The code symbol sequence would then have a length of  $(16 + 9) · 2 + (7 + 7 + 5 + 5) · 3 = 122$  bits, which would be three bits shorter than under the previous coding.
  • The average codeword length would then be  $L_{\rm M} = 122/49 ≈ 2.49$  bit/source symbol  instead of  $L_{\rm M}≈ 2.55$  bit/source symbol.


$\text{Conclusion:}$  This example can be interpreted as follows:

  • Huffman coding thrives on the (exact) knowledge of the symbol probabilities.  If these are known to both the sender and the receiver, the average codeword length  $L_{\rm M}$  is often only insignificantly larger than the source entropy  $H$.
  • Especially with small files, there may be deviations between the (expected) symbol probabilities  $p_μ$  and the (actual) frequencies  $h_μ$ .  It would be better here to generate a separate Huffman code for each file based on the actual circumstances  $(h_μ)$  basiert.
  • In this case, however, the specific Huffman code must also be communicated to the decoder.  This leads to a certain overhead, which again can only be neglected for longer files.  With small files, this effort is not worthwhile.


Influence of transmission errors on decoding


The Huffman code is lossless due to the property „prefix-free”.

  • This means that the source symbol sequence can be completely reconstructed from the binary code symbol sequence.
  • However, if an error occurs during transmission  $($a  0  becomes a  1  or a  1  becomes a  0$)$, , the sink symbol sequence  $〈v_ν〉$  naturally also does not match the source symbol sequence  $〈q_ν〉$ .


The following two examples show that a single transcription error can sometimes result in a multitude of errors regarding the source text.

$\text{Example 4:}$  We consider the same source symbol sequence and the same Huffman code as on the previous page.

On the influence of transmission errors in Huffman coding
  • The upper diagram shows that with error-free transmission, the original source sequence  111011...  can be reconstructed from the coded binary sequence  $\rm AEBFCC$...  can be reconstructed.
  • However, if for example bit 6 is falsified  $($from  1  to  0, red marking in the middle graphic$)$, the source symbol  $q_2 = \rm E$  becomes the sink symbol  $v_2 =\rm F$.
  • A falsification of bit 13  $($from  0  to  1, red marking in the lower graphic$)$  even leads to a falsification of four source symbols:   $\rm CCEC$  →  $\rm DBBD$.


$\text{Example 5:}$  Let a second message source with symbol range  $M = 6$  be characterised by the following symbol probabilities:

$$p_{\rm A} = 0.50 \hspace{0.05cm},\hspace{0.2cm}p_{\rm B} = 0.19 \hspace{0.05cm},\hspace{0.2cm}p_{\rm C} = 0.11 \hspace{0.05cm},\hspace{0.2cm} p_{\rm D} = 0.09 \hspace{0.05cm},\hspace{0.2cm}p_{\rm E} = 0.06 \hspace{0.05cm},\hspace{0.2cm}p_{\rm F} = 0.05 \hspace{0.05cm}.$$

Here the Huffman algorithm leads to the following assignment:

     $\boldsymbol{\rm A} \hspace{0.05cm} \rightarrow \hspace{0.15cm}$0$\hspace{0.05cm},\hspace{0.2cm} \boldsymbol{\rm B} \hspace{0.05cm} \rightarrow \hspace{0.15cm}$111$\hspace{0.05cm},\hspace{0.2cm} \boldsymbol{\rm C} \hspace{0.05cm} \rightarrow \hspace{0.15cm}$101$\hspace{0.05cm},\hspace{0.2cm} \boldsymbol{\rm D} \hspace{0.05cm} \rightarrow \hspace{0.15cm}$100$\hspace{0.05cm},\hspace{0.2cm} \boldsymbol{\rm E} \hspace{0.05cm} \rightarrow \hspace{0.15cm}$1101$\hspace{0.05cm},\hspace{0.2cm} \boldsymbol{\rm F} \hspace{0.05cm} \rightarrow \hspace{0.15cm}$1100$\hspace{0.05cm}.$

The source symbol sequence  $\rm ADABD$...  (see diagram) is thus represented by the code symbol sequence  0'100'0'111'100' ... .  The inverted commas are only for the reader's orientation.

On the error propagation of the Huffman coding

During transmission, the first bit is distorted:  Instead of  01000111100...  one receives  11000111100...

  • After decoding, the first two source symbols  $\rm AD$  →  0100  become the sink symbol  $\rm F$  →  1100.
  • The further symbols are then detected correctly again, but now no longer starting at the position  $ν = 3$, sondern bei  $ν = 2$.


Depending on the application, the effects are different:

  • If the source is a natural text and the sinker is a human, most of the text remains comprehensible to the reader.
  • f, however, the sink is an automaton that successively compares all  $v_ν$  with the corresponding  $q_ν$  , the result is a distortion frequency of well over  $50\%$.
  • Only the blue symbols of the sink symbol sequence  $〈v_ν〉$  then (coincidentally) match the source symbols  $q_ν$  while red symbols indicate errors.


Anwendung der Huffman–Codierung auf  $k$–Tupel


Der Huffman–Algorithmus in seiner Grundform liefert dann unbefriedigende Ergebnisse, wenn

  • eine Binärquelle  $(M = 2)$  vorliegt, zum Beispiel mit dem Symbolvorrat  $\{$ $\rm X$,  $\rm Y$ $\}$,
  • es statistische Bindungen zwischen den Symbolen der Eingangsfolge gibt,
  • die Wahrscheinlichkeit des häufigsten Symbols deutlich größer ist als  $50\%$.


Abhilfe schafft man in diesen Anwendungsfällen,

  • in dem man mehrere Symbole zusammenfasst, und
  • den Huffman–Algorithmus auf einen neuen Symbolvorrat  $\{$ $\rm A$,  $\rm B$, $\rm C$,  $\rm D$, ... $\}$  anwendet.


Bildet man  $k$–Tupel, so steigt der Symbolumfang von  $M$  auf  $M\hspace{-0.01cm}′ = M^k$.

Wir wollen im folgenden Beispiel die Vorgehensweise anhand einer Binärquelle verdeutlichen.  Weitere Beispiele finden Sie in


$\text{Beispiel 6:}$  Gegeben sei eine gedächtnislose Binärquelle $(M = 2)$ mit den Symbolen  $\{$ $\rm X$,  $\rm Y$ $\}$:

  • Die Symbolwahrscheinlichkeiten seien  $p_{\rm X} = 0.8$  und  $p_{\rm Y} = 0.2$.
  • Damit ergibt sich die Quellenentropie zu  $H = 0.722$  bit/Quellensymbol.
  • Wir betrachten die Symbolfolge  $\{\rm XXXYXXXXXXXXYYXXXXXYYXXYXYXXYX\ \text{...} \}$  mit nur wenigen  $\rm Y$–Symbolen an den Positionen 4, 13, 14, ...


Der Huffman–Algorithmus kann auf diese Quelle direkt nicht angewendet werden, das heißt, man benötigt ohne weitere Maßnahme für jedes binäre Quellensymbol auch ein Bit. Aber:

  • Fasst man jeweils zwei binäre Symbole zu einem Zweiertupel  $(k = 2)$  entsprechend   $\rm XX$   →   $\rm A$,   $\rm XY$   →   $\rm B$,   $\rm YX$   →   $\rm C$,   $\rm YY$   →   $\rm D$   zusammen, so kann man „Huffman” auf die resultierende Folge  →   $\rm ABAACADAABCBBAC$ ...  →   mit $M\hspace{-0.01cm}′ = 4$  →   anwenden. Wegen
$$p_{\rm A}= 0.8^2 = 0.64 \hspace{0.05cm}, \hspace{0.2cm}p_{\rm B}= 0.8 \cdot 0.2 = 0.16 = p_{\rm C} \hspace{0.05cm}, \hspace{0.2cm} p_{\rm D}= 0.2^2 = 0.04$$
erhält man   $\rm A$   →   1,   $\rm B$   →   00,   $\rm C$   →   011,   $\rm D$   →   010   sowie
$$L_{\rm M}\hspace{0.03cm}' = 0.64 \cdot 1 + 0.16 \cdot 2 + 0.16 \cdot 3 + 0.04 \cdot 3 =1.56\,{\rm bit/Zweiertupel} $$
$$\Rightarrow\hspace{0.3cm}L_{\rm M} = {L_{\rm M}\hspace{0.03cm}'}/{2} = 0.78\ {\rm bit/Quellensymbol}\hspace{0.05cm}.$$
  • Nun bilden wir Dreiertupel  $(k = 3)$  →   entsprechend
      $\rm XXX$   →   $\rm A$,   $\rm XXY$   →   $\rm B$,   $\rm XYX$   →   $\rm C$,   $\rm XYY$   →   $\rm D$,   $\rm YXX$   →   $\rm E$,   $\rm YXY$   →   $\rm F$,   $\rm YYX$   →   $\rm G$,   $\rm YYY$   →   $\rm H$.
Für die oben angegebene Eingangsfolge kommt man zur äquivalenten Folge  $\rm AEBAGADBCC$ ...  (basierend auf dem neuen Symbolumfang $M\hspace{-0.01cm}′ = 8$) und zu folgenden Wahrscheinlichkeiten:
$$p_{\rm A}= 0.8^3 = 0.512 \hspace{0.05cm}, \hspace{0.5cm}p_{\rm B}= p_{\rm C}= p_{\rm E} = 0.8^2 \cdot 0.2 = 0.128\hspace{0.05cm},\hspace{0.5cm} p_{\rm D}= p_{\rm F}= p_{\rm G} = 0.8 \cdot 0.2^2 = 0.032 \hspace{0.05cm}, \hspace{0.5cm}p_{\rm H}= 0.2^3 = 0.008\hspace{0.05cm}.$$
Die Huffman–Codierung lautet somit:
      $\rm A$   →   1,   $\rm B$   →   011,   $\rm C$   →   010,   $\rm D$   →   00011,   $\rm E$   →   001,   $\rm F$   →   00010,   $\rm G$   →   00001,   $\rm H$   →   00000.
Damit erhält man für die mittlere Codewortlänge:
$$L_{\rm M}\hspace{0.03cm}' = 0.512 \cdot 1 + 3 \cdot 0.128 \cdot 3 + (3 \cdot 0.032 + 0.008) \cdot 5 =2.184 \,{\rm bit/Dreiertupel} $$
$$\Rightarrow\hspace{0.3cm}L_{\rm M} = {L_{\rm M}\hspace{0.03cm}'}/{3} = 0.728\ {\rm bit/Quellensymbol}\hspace{0.05cm}.$$
In diesem Beispiel wird also bereits mit  $k = 3$  die Quellenentropie  $H = 0.722$  bit/Quellensymbol nahezu erreicht.


Aufgaben zum Kapitel


Aufgabe 2.6: Zur Huffman-Codierung

Aufgabe 2.6Z: Nochmals zum Huffman–Code

Aufgabe 2.7: Huffman-Anwendung für binäre Zweiertupel

Aufgabe 2.7Z: Huffman-Codierung für Zweiertupel einer Ternärquelle

Aufgabe 2.8: Huffman-Anwendung bei einer Markovquelle

Aufgabe 2.9: Huffman-Decodierung nach Fehlern