Exercise 3.4Z: Various All-Pass Filters
We first assume a two-port network with the following transfer function:
- $$H_{\rm L}(p)= \frac {1-{p}/{A}} {1+{p}/{A}}.$$
From this, the conventional Fourier frequency response
- $$H(f) = {\rm e}^{-a(f)\hspace{0.05cm}}\cdot {\rm e}^{- \hspace{0.05cm}{\rm j} \hspace{0.05cm}\cdot \hspace{0.05cm}b(f)},$$
which is representable by the attenuation function $a(f)$ and the phase function $b(f)$, is to be determined.
The upper diagram shows a so-called all-pass circuit where the complex resistance $Z_1$ denotes an inductance and the complex resistance $Z_2$ denotes a capacitance:
- $$Z_1 = p \cdot L\hspace{0.05cm},\hspace{0.2cm}Z_2 = \frac{1}{p \cdot C}\hspace{0.05cm}.$$
For anechoic adjustment at the input and output with
- $$Z_{\rm I}=Z_{\rm A} = \sqrt{Z_1 \cdot Z_2} = \sqrt{{L}/{C}},$$
the following holds for the $p$–transfer function of the circuit $\rm A$ (see upper diagram):
- $$H_{\rm L}(p)= \frac {Y_{\rm L}(p)} {X_{\rm L}(p)}= \frac {Z_2-Z_1} {Z_1+2 \cdot \sqrt{Z_1 \cdot Z_2}+Z_2}\hspace{0.05cm}.$$
The circuit $\rm B$ is defined by the $p$–transfer function. It is characterized by the fact that
- all poles (in the left $p$–half-plane)
- are located in a mirror-imaged manner with respect to the zeros (in the right half-plane).
Please note:
- The exercise belongs to the chapter Laplace Transform and p-Transfer Function.
Questions
Solution
- $$H_{\rm L}(p)= \frac {1-{p}/{A}} {1+{p}/{A}}= -1 \cdot \frac {p-A} {p+A}\hspace{0.3cm}\Rightarrow \hspace{0.3cm}\hspace{0.15cm} \underline{K =- 1}, \hspace{0,2cm} \hspace{0.15cm} \underline{p_{\rm o}/A = 1} ,\hspace{0,2cm} \hspace{0.15cm} \underline{ p_{\rm x}/A = -1} \hspace{0.05cm} .$$
(2) Richtig sind die Aussagen 2 und 3:
- Setzt man $p = {\rm j} \cdot 2 \pi f$, so erhält man:
- $$H(f)= \frac {1-{\rm j \cdot 2\pi \it f}/A} {1+{\rm j \cdot 2\pi \it f}/A}\hspace{0.05cm} .$$
- Der Betrag eines Quotienten ist gleich dem Quotienten der Beträge:
- $$|H(f)|= \frac {|1-{{\rm j} \cdot 2\pi f}/A|} {|1+{\rm j \cdot 2\pi \it f}/A|}= \frac {\sqrt{1+(2\pi f/A)^2}} {\sqrt{1+(2\pi f/A)^2}}= 1\hspace{0.3cm} \Rightarrow \hspace{0.3cm} a(f)= -{\rm ln} \hspace{0.1cm} |H(f)|= 0\hspace{0.2cm}({\rm Np \hspace{0.2cm}oder \hspace{0.2cm}dB})\hspace{0.05cm} .$$
- Aber auch die $\text{Aussage 3}$ ist richtig, wie aus der Theorieseite "Grafische Ermittlung der Dämpfung" zu ersehen ist.
(3) Die Phasenfunktion $b(f)$ kann wie folgt berechnet werden:
- $$b(f)= -{\rm arc} \hspace{0.1cm} H(f) \hspace{0.25cm} = \hspace{0.2cm} {\rm arctan } \hspace{0.1cm} ({2\pi f}/{A}) - {\rm arctan } \hspace{0.1cm} ({-2\pi f}/{A}) = 2 \cdot {\rm arctan } \hspace{0.1cm} ({2\pi f}/{A}),$$
- $$b(f= {A}/{2\pi})= 2 \cdot {\rm arctan } \hspace{0.1cm}(1) = 2 \cdot 45^\circ \hspace{0.15cm} \underline{ = 90^\circ}\hspace{0.05cm},$$
- $$ b(f= {A}/{\pi})=2 \cdot {\rm arctan } \hspace{0.1cm}(2) = 2 \cdot 63.4^\circ \hspace{0.15cm} \underline{= 126.8^\circ}\hspace{0.05cm} ,$$
- $$ b(f \rightarrow \infty)=2 \cdot {\rm arctan } \hspace{0.1cm}(\infty) = 2 \cdot 90^\circ \hspace{0.15cm} \underline{= 180^\circ}\hspace{0.05cm} .$$
- Zu den gleichen Ergebnissen kommt man nach der Vorgehensweise nach der Seite "Grafische Ermittlung der Phase" im Theorieteil.
(4) Richtig ist nur die Aussage 1:
- Die angegebene $p$–Übertragungsfunktion lässt sich wie folgt darstellen:
- $$H_{\rm L}(p)= \frac {Z_2-Z_1} {Z_1+2 \cdot \sqrt{Z_1 \cdot Z_2}+Z_2}= \frac {(\sqrt{Z_2}-\sqrt{Z_1})(\sqrt{Z_2}+\sqrt{Z_1})} {(\sqrt{Z_2}+\sqrt{Z_1})^2}= \frac {\sqrt{Z_2}-\sqrt{Z_1}} {\sqrt{Z_2}+\sqrt{Z_1}}\hspace{0.05cm}.$$
- Mit $Z_1 = p \cdot L$ und $Z_2 = 1/(p \cdot C)$ erhält man weiter:
- $$H_{\rm L}(p)= \frac {\sqrt{{1}/(pC)}-\sqrt{pL}} {\sqrt{{1}/(pC)}+\sqrt{pL}} = \frac {1- p \cdot \sqrt{LC}} {1+ p \cdot \sqrt{LC}} = -1 \cdot \frac {p-\sqrt{{1}/(LC)}} {p+\sqrt{{1}/(LC)}}\hspace{0.3cm} \Rightarrow \hspace{0.3cm}A = \sqrt{{1}/(LC)}: \hspace{0.2cm}H_{\rm L}(p)= -1 \cdot \frac {p-A} {p+A}\hspace{0.05cm}.$$
- Es ergibt sich die gleiche Übertragungsfunktion, wie in der Teilaufgabe (1) berechnet.
Daraus folgt, dass nur die Aussage 1 richtig ist:
- Der Dämpfungsverlauf ist $a(f) = 0\ \rm (Np)$. Keine Frequenz wird gedämpft oder verstärkt. Man spricht deshalb auch von einem "Allpass".
- Die zweite Aussage ist falsch. Der Phasenverlauf $b(f)$ ist nicht linear, sondern vielmehr gekrümmt, wie in der Teilaufgabe (3) berechnet.
- Die Hilbert–Transformierte der Konstanten $a(f) = 0$ müsste zur Phasenfunktion $b(f) = 0$ führen, wie im Theorieteil gezeigt. Das heißt: die Aussage 3 ist falsch.
- Nur bei minimalphasigen Systemen hängen die Dämpfungsfunktion $a(f)$ und Phasenfunktion $b(f)$ über die Hilbert–Transformation zusammen.
- Bei einem solchen Minimum–Phasen–System liegen aber alle Pole und Nullstellen in der linken $p$–Halbebene, was hier nicht zutrifft ⇒ ein Allpass ist kein Minimum–Phasen–System.
(5) Beide Aussagen sind richtig:
- Wie bereits in der Teilaufgabe (2) festgestellt wurde, ergibt sich immer dann eine konstante Dämpfung, wenn es zu jedem Pol in der linken $p$–Halbebene eine entsprechende Nullstelle in der rechten Halbebene gibt ⇒ die Schaltung $\rm B$ zeigt ebenfalls Allpass–Charakteristik.
- Da $b(f)$ stets eine unsymmetrische Funktion ist, gilt $b(f= 0) = 0$ ganz allgemein.
- Das heißt für jede Spektralfunktion $H(f)$, deren Fourier–Rücktransformierte ("Impulsantwort") reell ist.